Used Turbine for sale (305)

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Nljdpey Avh Nofx Ai Ash Upon request, we are happy to send you a layout plan.

Condition: used, Year of construction: 2012, mileage: 130,000 km, power: 169 kW (229.78 HP), first registration: 12/2012, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2028, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Internal Vehicle No.: G400124 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Scania G230 4x2 Road Sweeper Scarab Magnum | Weed Brush | Euro 5 For sale: a used Scania G230 4x2 road sweeper with a Scarab Magnum body, manufactured in 2012. The vehicle is equipped with a 230 hp diesel engine, air conditioning, and rear-wheel drive. During normal road operation, the vehicle is driven via a manual gearbox. For sweeping operations, a hydrostatic drive system is available. The equipment includes, among other things, a right-hand sweeping unit, a weed brush at the front of the vehicle, a rear suction system, and a high-pressure pump with a lance. Technical data of the vehicle: * Manufacturer/Model: Scania G230 * Vehicle type: Road Sweeper * First registration: 12/14/2012 * Year of manufacture: 2012 * Total kilometers driven: approx. 130,000 km * Kilometers swept: 65,868 km * Engine operating hours: 14,239 hrs * Power: 169 kW (230 hp) * Engine displacement: 9,290 cm³ * Fuel: Diesel * Transmission for road operation: Manual gearbox * Drive system for sweeping operation: Hydrostatic * Emission standard: Euro 5 * Environmental badge: 4 (Green) * Number of axles: 2 * Wheel formula: 4x2 * Driven axles: 1 * Drive: Rear-wheel drive * Permissible gross weight: 18,000 kg * Unladen weight: 9,490 kg * Payload: 8,500 kg * Overall length: 6,700 mm * Width: 2,550 mm * Height: 3,250 mm * Air conditioning * Color: Orange * TÜV (technical inspection): New * Vehicle number: G400124 * Condition: Used * German vehicle Technical data and equipment of the superstructure: * Manufacturer/Model: Scarab Magnum * Operating hours of the road sweeper superstructure: 11,587 hrs * Sweeping water tank: approx. 1,200 liters * Hydrostatic drive system for sweeping operation Nljdpfoy N H Dhex Ai Aeh * Sweeping unit on the right-hand side * Weed brush at the front * Suction system at the rear * High-pressure pump with lance * High-pressure nozzle for cleaning the turbine * Rear camera * Side camera * Running boards at the rear * Front and rear warning lights * Two rotating beacons on the vehicle roof * One rotating beacon at the rear left of the container Inspection and functional testing possible after prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: ready for operation (used), There are 22 WEG electric motors available: 1x WEG IE3-IP23-B3-V, 1x WEG IE3-IP55-B35-FF500-V, 2x WEG IE3-IP23-B35-FF600-F, 3x WEG IE3-IP23-B35-FF400-F, rated power: 37kW, 1 WEG IE3-IP23-B3-F, rated power: 75kW, 2 WEG IE3-IP23-B35-FF600-F, 1 WEG IE3-IP23-B35-FF600-F, 1x WEG IE3-IP23-B35-FF500-V, rated power: 47kW, 5x WEG IE3-IP23-B35-FF600-V, rated power: 113kW, 1x WEG IE3-IP23-B3-V, rated power: 113kW, 1x WEG IE3-IP23-B3-V, rated power: 91kW, 1x WEG IE3-IP23-B3-V, rated power: 136kW, 1x WEG IE3-IP23-B3-V, rated power: 245kW, 1x WEG, rated power: 132kW. An on-site inspection is possible. Nlodpfx Ajzpyyaoi Ajh

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Nlsdpfxjzgq Szj Ai Aoh

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,554 h, functionality: fully functional, overall weight: 1,500 kg, HAKO JONAS 1200 E Sweeper New Hawker Perfect Plus 24V 420 Ah (7PZS420) traction battery New Neos 24V 50A charger New air filter Year of manufacture: 2011 Machine operating hours: 1,554 Built-in warning light and full front/rear road lighting A new, innovative cylindrical brush combined with a new anti-static side brush (mixed-bristle) ensures excellent sweeping results A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping The machine features a large-debris flap for collecting larger waste items The unit has undergone a comprehensive, meticulous overhaul; operating fluids and components—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Nljdpfxez D D Nxo Ai Aoh Model: Jonas 1200 E Sweeping width (mm): 800 Sweeping width with one side brush (mm): 1150 Coverage with one side brush (m²/h): 9300 Sweeping speed (km/h): 8 Hopper capacity (l): 130 Filter area (m²): 5 Dimensions L x W x H (mm): 1998 x 1142 x 1520 Weight ready for operation (kg): ~1500 INCLUDED: NEW HAWKER PERFECT PLUS traction battery 24V 420 Ah (7PZS420) NEW NEOS charger 24V 50A NEW air filter NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW cylindrical brush skirt/seals Built-in warning light Full front/rear road lighting Waste hopper (130L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 1200 E sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level parking garages, warehouses, production facilities, and outdoor areas. Battery power ensures high flexibility, allowing for operation in enclosed spaces and buildings. warehouse halls A large working width (1,150 mm) ensures high area coverage. Highly legible and intuitive control panel.

Condition: ready for operation (used), Year of construction: 1998, Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5.43A, protection class: IP23S (drip-proof, open ventilated), cooling: IC06 (forced ventilation by mounted fan), mounting arrangement: IM1001 (B3 foot-mounted design), weight: 455kg, standardized dimensions (IEC frame size 180), shaft height (H): 180mm, foot mounting hole spacing width (A): 279mm, foot mounting hole spacing length (B): 279mm (L version), shaft diameter (D): 48mm (optional 55mm reinforced version), shaft extension length (E): 110mm, mounting hole diameter (K): 15mm, CE marking available. An on-site inspection is possible. Nledpfozavylox Ai Ajh

Condition: excellent (used), mileage: 26,653 km, power: 397 kW (539.77 HP), first registration: 09/2023, fuel type: diesel, fuel: diesel, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 5,000 mm, loading space width: 2,500 mm, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power assisted steering, power mirror, spoiler, traction control, trailer coupling, - 3. Valve - 4. Valve - 5. Valve - Front work light - Brake booster - Differential lock - High beam - Low noise - Speed limiter - Leather interior - Leather upholstery - Alloy wheels - Air suspension - Air-suspended seats - Air horn - Media system - Rotating beacon - Rearview camera - Sunroof - Sun visor - Auxiliary heater - Toolbox - Power take-off (PTO) - Tow hitch General information Operating hours: 853 Weights Unladen weight: 46,495 kg Payload: 9,505 kg GVW: 56,000 kg Functional Mast: Telescopic (14 sections) Lifting capacity: 30,000 kg Number of valves: 4 Superstructure brand: FASSI F 2150RA.2.28+JIB L 816 +LIER CE marking: yes Interior Upholstery: Leather Condition Technical condition: very good Optical condition: very good OFFER Volvo FH 540 10x4 semi-trailer tractor / flatbed truck with Fassi F2150RA.2.28 XHE-Dynamic + L816 Fly-Jib + Hydraulic winch We are pleased to offer you this exceptionally high-quality Volvo FH 540 10x4, equipped with one of the most powerful Fassi crane systems. This vehicle was specifically designed for the heaviest lifting and transport operations and impresses with its enormous lifting capacity, state-of-the-art crane technology, and extremely high-quality workmanship. The combination of the Fassi F2150RA.2.28 XHE-Dynamic, the L816 Fly-Jib, the hydraulic winch, and the removable ballast box makes this vehicle the ideal solution for construction companies, heavy transport, wind energy projects, industrial operations, and special installations. Technical data of the vehicle Manufacturer: Volvo Model: FH 540 Version: 10x4 semi-trailer tractor / flatbed truck Engine: Volvo D13K Euro 6 Displacement: 12,777 cm³ Power: 540 hp Transmission: Volvo I-Shift automatic transmission Engine brake: Volvo VEB+ Cab: Globetrotter long-distance cab Suspension: Full air suspension Front axles: 10-ton version Rims: Original Alcoa aluminum rims Fassi F2150RA.2.28 XHE-Dynamic Nledpfszxgk Dsx Ai Ash The truck is equipped with the powerful Fassi F2150RA.2.28 XHE-Dynamic crane. The equipment includes: Fassi F2150RA.2.28 XHE-Dynamic Fly-Jib L816 Hydraulic Brevini winch Front support A total of 14 hydraulically extendable outriggers Radio remote control Endless swing system 360° XP system Prolink system IMC electronic stability system Automatic load moment limitation Additional hydraulic oil cooler Complete hydraulic system CE certified Performance data Maximum lifting capacity: 30,000 kg Maximum working height: approx. 36 meters Large horizontal reach Excellent lifting performance even with a large outreach Ideal for steel construction, precast concrete components, machine relocation, wind turbines, and heavy-duty installations Superstructure The vehicle is built as a semi-trailer tractor with a flatbed and has a removable ballast box. Ballast box Length: 500 cm Aluminum side panels Removable ballast structure Several lashing points Fork pockets Non-slip floor High-quality workmanship Weights ...

Condition: new, Year of construction: 2014, An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible. Nsdsxwywzspfx Ai Ajlh

Condition: reconditioned (used), Year of construction: 2012, operating hours: 693 h, functionality: fully functional, working width: 650 mm, area performance: 4,200 m²/h, overall weight: 706 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO HAKOMATIC B115 R TB650 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A CHARGER Manufactured in 2012 with 693 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers, resistant to contact with oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction width (mm): 860 Theoretical capacity (m²/h): 4200 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 706 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW NEOS 24V 30A BATTERY CHARGER NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (x2) Nsdeztp Unspfx Ai Aelh NEW drain hose NEW suction hose NEW head guard rubbers (x2) Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Nlodozbub Dopfx Ai Aoh Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: used, Year of construction: 2007, functionality: fully functional, space requirement width: 2,300 mm, space requirement length: 3,500 mm, space requirement height: 4,200 mm, conveyor belt width: 850 mm, -WAG 916- Here, a compact shot blasting machine from the manufacturer Wheelabrator is offered for sale. The compact shot blasting machine, type MB-100, is fully functional. Operating hours: 6493.23 h Turbine power: 7.5 kW, 14.6 Amps Next inspection: 01/27 Machine control: Manual or automatic operation Feeder control: Manual or automatic operation Blast time setting: Fine adjustment between seconds, minutes, and hours Space requirement length: approx. 3500 mm Space requirement width: approx. 2300 mm Space requirement height: approx. 4200 mm Conveyor belt width: 850 mm Nlsdozkub Uopfx Ai Ajh The compact shot blasting machine has been completely disassembled and cannot be tested while powered on.

Condition: used, For sale: a resonator turbine inverter, removed from a Finn-Power L6A CO2 laser. Two units are available. The inverters are in good condition. Manufacturer: KEB combivert Manufacturer’s code: 0308A757 / 57251, additional code 15.F4.CNE-A001 Revision: V 1.4 PRC laser Nedpfx Asy Sz Utji Ajlh Price per unit: 400 EUR. If you have any further questions, please do not hesitate to ask.

Condition: good (used), functionality: fully functional, Year of construction: 2003, Do you have a problem with the resonator on your TRUMPF laser cutting machine with 5 kW output? Then you’ve come to the right place! TruFlow 5000 / 5 kW resonator for TRUMPF laser cutting machines (L 3050 / L 4050 / L 6050 / TruLaser 5030 / 5040 / 5060) Power measurement during machine dismantling: 5,462 W (end of October 2025) Njdpfsxzivbsx Ai Aolh (The machine still delivered 4,930 watts at the cutting head. The resonator is in very good condition in terms of output.) Leak test: 0.02 hPa If you would like to replace your resonator or if you have issues with your turbine, feel free to contact us. All parts are available at short notice.

Condition: new, Year of construction: 2025, 2 high-performance impeller wheels, Ø380, 11 kW each. Our impeller wheel is characterized by its high flexibility due to its ability to rotate both clockwise and counterclockwise. Our two-disc turbine ensures a stronger, more concentrated hot spot and more efficient blasting. Replacing the 8 impeller blades and the internal lining is easy and can be done without special tools or the need to disassemble the turbine wheel. All wear parts are made of high-quality materials for a long service life. A mechanical pre-acceleration of the abrasive ensures optimal utilization of the energy used. It also forms the heart of the blasting system: the efficiency and economy of the blasting system are decisively influenced by the efficiency of the impeller wheel. The impeller wheel is directly driven and, depending on the diameter, is equipped with 4-8 blades (Ø240, 4 pieces; Ø380-500, 8 pieces). High efficiency and maximum utilization of the energy used are thus guaranteed at all times. We will be happy to advise you! Nljdpshvmkxefx Ai Aoh

Condition: as good as new (ex-display), Pump, Regenerative Turbine Pump, Speck Magnetic Coupling Regenerative Pump 3 m³/h, Used Machine Nsdpfxozf D Ake Ai Ajlh Overall Dimensions Width: 380 mm Depth: 170 mm Height: 140 mm Manufacturer Speck Pumpen (Roth, Germany) Technical Specifications Model: CY-4281-MK.0742 ID Number: 38799 Serial Number: 1002127031 Date of Manufacture: 11/2020 Maximum Medium Temperature: Water: max. 160 °C Oil: max. 200 °C Maximum Head (Hmax): 70 m Maximum Flow Rate (Qmax): 50 l/min (3 m³/h) Frequency: 50 Hz

Condition: new, Year of construction: 2014, Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich. Njdpfx Aioxxl Ihs Ajlh

Condition: reconditioned (used), Year of construction: 2016, operating hours: 384 h, functionality: fully functional, overall weight: 1,100 kg, HAKO SWEEPMASTER B1200 RH Sweeper New Hawker Perfect Plus 24V 420 Ah (7PZS420) traction battery New NEOS 24V 50A charger Njdpfx Ajz Ahwyji Aslh New air filter Year of manufacture: 2016 Machine operating hours: 348 A new, innovative cylindrical brush combined with a new anti-static side brush (mixed-bristle) ensures excellent sweeping results. A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping. The machine is equipped with a large debris flap for collecting larger waste items. The unit has undergone a comprehensive, meticulous overhaul; operating fluids and parts—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each machine we offer is photographed individually; you are buying the exact machine shown. TECHNICAL DATA: Model: Sweepmaster B1200 RH Sweeping width (mm): 800 Sweeping width with one side brush (mm): 1150 Coverage with one side brush (m²/h): 9300 Sweeping speed (km/h): 8 Hopper capacity (l): 130 Filter area (m²): 5 Dimensions L x W x H (mm): 1998 x 1142 x 1520 Weight ready for operation (kg): ~ 1100 INCLUDED: NEW HAWKER PERFECT PLUS traction battery 24V 420 Ah (7PZS420) NEW NEOS charger 24V 50A NEW air filter NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW cylindrical brush skirt/seals Debris hopper (130L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area The Sweepmaster B1200 RH sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level car parks, warehouses, production facilities, and outdoor areas Battery power ensures high flexibility, allowing for operation in enclosed spaces, buildings, and warehouse halls Large working width (1150 mm) ensures high... area coverage Highly legible and intuitive control panel.

Condition: new, Year of construction: 2010, Make Voith Model: RWW11 E5 Windrive planetary gear Year of manufacturing: 2010, Unused Dimensions LxWxH (mm) 2400 x 1450 x 1700 Weight (kg) ca 6900 Total quantity in stock 3 Nedpfxotub Dze Ai Ajlh Country of origin Germany Comments Unused mindmill planetary gear, 3400 Kw power supply needed, n1: 476 rpm / n2: 1500 rpm

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, working width: 550 mm, area performance: 2,475 m²/h, warranty duration: 12 months, water tank capacity: 40 l, empty load weight: 179 kg, TASKI SWINGO 955B SCRUBBER-DRYER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Node Aa I Htepfx Ai Aelh NEW NEOS 24V 10A BATTERY CHARGER Year of manufacture: 2018 550mm cleaning head equipped with new medium-stiffness disc brushes, suitable for use on any surface. New polyurethane squeegee blades, resistant to contact with oils, greases, and petroleum-based substances. Wheel drive facilitates daily operation. Suction turbine ensures high-power water recovery from the squeegee assembly. Each machine we offer is photographed individually; you are purchasing the exact unit shown in the pictures. TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 550 Squeegee working width (mm): 800 Theoretical coverage (m²/h): 2475 Working speed (km/h): 4.5 Tank capacity (l): 40/40 Weight of the machine ready for operation (kg): ~179 Dimensions (L x W x H) (mm): 1180 x 800 x 1150 INCLUDED: NEW 12V 85Ah SIAP gel batteries (2x) NEW NEOS 24V 10A battery charger NEW 280mm disc brushes (2x) 24V 500W suction motor Suction hose + drain hose Squeegee assembly with new oil-resistant rubber blades Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 40-liter tank capacity allows for a large volume of cleaning solution, minimizing the need for frequent interruptions to refill. The machine’s design ensures excellent maneuverability; its small turning radius allows for operation even in narrow aisles and passageways. The parabolic squeegee assembly ensures thorough removal of the cleaning solution from the surface. A wide working path (550mm) ensures high surface coverage efficiency. Highly clear and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 699 h, functionality: fully functional, working width: 650 mm, area performance: 4,200 m²/h, overall weight: 706 kg, warranty duration: 12 months, tank capacity: 116 l, HAKO SCRUBMASTER B115 R TB650 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A BATTERY CHARGER Manufactured in 2014 with 699 hours of operation. 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction width (mm): 860 Theoretical capacity (m²/h): 4200 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 706 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW NEOS 24V 30A BATTERY CHARGER NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE Nljdpfx Aijzubv He Ash KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: excellent (used), Year of construction: 2015, - Continuous flow, suspended part shot blasting system, specifically designed for automatic, continuous surface treatment of suspended workpieces. - Suitable for applications such as derusting, descaling, deburring, fine finishing, final shot blasting, or roughening. - Flexible workpiece suspension. - Efficient blasting technology through high-performance turbines. - Automatic continuous operation. - System dimensions: 12.75 x 6.6 x 10.42 m (W x H x L). - Door opening dimensions: 2.0 x 2.0 m (W x H). Nlsdpfxozvnnls Ai Ash - Workpiece dimensions: max. diameter 2,100 mm, max. height 2,100 mm, max. hook load 2,000 kg, max. part temperature 80 °C. - Abrasive: round F16-20. - High-performance turbines, type 3.6, quantity 06. - Impeller diameter 380 mm. - Blade width 55 mm. - Number of blades per turbine: 6. - Drive power per turbine: max. 11 kW.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. Njdpfetqu Diex Ai Aolh CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. Nsdpsy Uwg Rofx Ai Ajlh 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09001M, type of input current: three-phase, cutting length (max.): 10,000 mm, overall weight: 50,000 kg, cutting height (max.): 700 mm, total length: 38,000 mm, input current: 125 A, Complete sawmill with chipper and debarker, including sawdust turbine. For sale: a complete and fully operational KARA Master sawmill—an efficient and robust solution for professional timber processing. The sawmill operates on a 125 Amp electrical supply and is fully functional. It can process logs with diameters up to 70 cm and lengths of 10-11 meters. Njdpfx Aexz Eg Noi Aelh The sawmill features fully adjustable thickness settings along a rail system, allowing you to pre-set various cutting thicknesses as required. Cutting depth ranges from 13 mm up to 315 mm, enabling production of everything from thin boards to heavy beams—precisely and efficiently. The system is equipped with a debarker to protect the saw blade and ensure clean, uniform cuts. For handling residual materials, a chipper is included to facilitate the easy and practical disposal of wood waste. Finished timber can be sorted into three separate stacks, promoting an organized and streamlined workflow. This machine is ideal for larger sawmills and timber companies seeking high-capacity and flexible production. Disassembly and transportation of the sawmill is the responsibility of the buyer. Estimated transport dimensions are 12.5 x 2.5 x 3 meters (L x W x H) per truck, with a total of 3-4 truckloads anticipated.

Condition: good (used), Year of construction: 2008, Pass threw Hook type shotblasting machine 3000x3500 with motorised hook with crane OMSG Year or production: 2008 Type: Hook type Max. diameter of workpiece: 3000 mm Max. height of workpiece: 3500 mm Max. workpiece weight: 10.000 kg Manual blasting chamber: YES Blow off chamber: YES Machine oppening width: Nr. Of turbines: 16 Turbine type: 350 Turbine wheel diameter: 350 Power of turbine: 16x 11kW Max. turbine flow: Nsdpozubb Nsfx Ai Aslh Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Installed power: 241 kW