Used Turbocharger Balancing for sale (993)

Condition: used, functionality: fully functional, Audio Precision, Inc. Multichannel Audio Analyzer, APx586 Model: APx586 Condition: Used Fpjdpoxq Ehlefx Ah Uop Technical Data: 100-240V AC 50-60Hz 160VA General Information: Analog inputs: 16 3x balanced inputs Analog outputs: 8 Digital I/O: 1x unbalanced, 1x optical, 1x balanced each Software options AUX Control Out AUX Control In PC interface

Condition: used, mileage: 260,205 km, power: 255 kW (346.70 HP), first registration: 05/1997, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x6, maximum load weight: 13,850 kg, empty load weight: 12,150 kg, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro2, loading space width: 2,450 mm, loading space length: 4,600 mm, loading space height: 900 mm, number of seats: 2, Equipment: all wheel drive, cabin, differential lock, trailer coupling, * German vehicle * 6x6 all-wheel drive * V8 engine with turbocharger * Powerful, air-cooled V8 with OHV direct injection * Built for use in any terrain * Reliable technology with central tubular frame and swing axles * Complete leaf suspension * 3-sided tipper * Tipper dimensions length 4.90 m x width 2.45 m * Tail lifts 0.90 m * Front worktop * Municipal plate with electrical connections * Raised municipal lighting * Trailer coupling * Total towing weight 40,000 kg. * Tipper hydraulics * Driver's cab with 2 seats * Auxiliary heating * Differential lock * 6-speed manual gearbox * Heated electrically adjustable mirrors * Wheelbase 3.90 m + 1.40 m * GVW. 26,000 kg. Fjdpfevhp Tdex Ah Uspp * Unladen weight 12,150 kg. * Payload 13,850 kg. If new TÜV approval is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 1996, condition: ready for operation (used), Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible. Fpedpfjxvdd Asx Ah Usp

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system Fpedpow U Ekpefx Ah Usp

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 807244, saw band length: 5,600 mm, saw band width: 25 mm, cutting speed: 1,650 mm/min, cutting width (max.): 780 mm, cutting height (max.): 360 mm, power: 4 kW (5.44 HP), Hardly used GARANT 800 band saw from HEMA. It has only been used for light wood fibre panels and is being replaced by a larger model; it functions perfectly. The scope of delivery includes the bandsaw itself, 3 "HEMA Peak" hardened-tip saw blades (1 blade installed), a mobile base, and the full documentation/manual. Sale is made exclusively to commercial buyers and with exclusion of any warranty or guarantee. Detailed machine description: - Steel frame in left-hand design - Interlocked safety doors - Machined aluminium table, tiltable up to 7° - Aluminium belt wheels with vulcanised and ground rubber coating, dynamically balanced - Precision roller guides top and bottom, upper guide height adjustable via handwheel, vibration-dampened wheel suspension with blade tension indicator - Compact V-belt drive with three-phase motor, safety brake, brake release device, and motor protection with undervoltage release - Aerodynamically optimised extraction nozzle - Paint: Grey RAL 7031 / 7047 – Signal Red RAL 3001 Fpedpfxjw Izy Tj Ah Usp Technical data: Roller diameter: 800 mm Cutting width: approx. 780 mm Cutting height: approx. 360 mm Blade length: 5600 mm Blade width: 25 mm Three-phase motor: 400 V, 50 Hz, 4.0 kW Cutting speed: 1650 m/min

Condition: new, Year of construction: 2014, Slewing jib crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Year of manufacture: 2014 New and unused Fpjdpsgu Dkyofx Ah Uep Maximum permissible load capacity: 25 kg Working radius approx.: 3,000 mm Maximum lift: 800 mm Maximum lifting speed: approx. 800 mm/sec Power supply: pneumatic Mounting type: Slewing jib with free-standing column Net weight (with load handling device): 287 kg Operating pressure (pneumatic): 6 bar Required air quality for max. load capacity: clean, dry and filtered (5μm) Maximum air consumption: approx. 17 Nl/double stroke ZYBA-MAT on slewing jib Pneumatic balance control with automatic scale

Condition: excellent (used), Year of construction: 2023, Work Area Longitudinal slide travel (X) 350 mm Cross slide travel (Y) 250 mm Usable vertical slide travel (Z) 300 mm Distance spindle nose – table surface (min.-max.) 120 – 420 mm Milling Table Cast iron table, ground Clamping surface (LxW) 520 x 300 mm Table surface height above floor 900 mm Max. table load 100 kg Number of T-slots 5 T-slot size acc. to DIN 650 12 mm T-slot spacing 45 mm Fpodpfxsw N Nvls Ah Uep Milling Spindle Speed range – direct drive 0 – 10,000 rpm (Three-phase asynchronous motor) Torque (100/60% DC) 33 / 41 Nm Power (100/60% DC) 7 / 8.5 kW Tool holder per DIN ISO 69871-A SK 30 Pull stud per DIN ISO 69872 (similar to 7388/2) M12, Type A Tool holder balanced G2.5 (per DIN ISO 1940, at 10,000 rpm) Slide Drives (Servo Motors) Feed rate in X / Y / Z 24 m/min Rapid traverse speed in X / Y / Z 24 m/min Feed force in X / Y / Z 3000 / 3000 / 4000 N Mean positional scatter per VDI 3441 in X / Y / Z 4 / 4 / 4 µm Tool Magazine Tool changer based on S-arm principle with random management Number of tool stations 20 Direct tool change time 2.5 s Max. tool diameter Ø 63 mm Max. tool diameter with adjacent slot empty Ø 80 mm Max. tool length 200 mm Max. tool weight 5 kg Clamping force 1500 N Max. total tool magazine load 60 kg Coolant System (Option) Coolant supply at milling spindle via 3 nozzles Tank capacity (standard) 140 l Delivery pressure at 50 Hz 3.5 bar Flow rate at 3.5/1 bar 15 / 65 l/min Pneumatics Supply pressure 6 bar Connection line Ø 10 mm Supply volume 50 l/min Compressed air quality per DIN ISO 8573-1 Purity class 4 Lubrication System Main spindle bearings Lifetime grease lubrication Guideways automatic central oil lubrication Feed screws automatic central oil lubrication Electrical Connection Power supply 3/PE 400~ V Max. voltage fluctuations +10 / -10 % Frequency 50 / 60 Hz Machine connected load 9 kVA Max. main fuse for machine 20 A gG Required short-circuit power 700 kVA Dimensions / Weights Overall height 2200 mm Installation area (WxD) (excluding coolant and options) 1600 x 1710 mm Total machine weight 1970 kg (excluding coolant and options) Coolant tank (standard, empty) 60 kg Chip Conveyor Hinged belt conveyor for wet and dry machining Discharge height 500 mm 4th Axis / NC Rotary Table Resolution 0.01° Max. speed 44 rpm Max. torque 20 Nm

Condition: used, mileage: 245,391 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 04/2018, next inspection (TÜV): 12/2025, emission class: euro6, color: red, number of seats: 5, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, INTERNAL VEHICLE NUMBER: M518 VW CRAFTER 2.0TDI MIXTO PLUS Mileage: 245,391 km – Full service history Turbocharger: new Clutch: new Single owner The vehicle can be driven with a category B driving licence Summer tires * Cruise control * Speed limiter * Crosswind assist * Hill start assist * Brake assist (HBA) * Air conditioning * Start-stop system 4Motion all-wheel drive Mixto Plus Auxiliary heater Fog lights Cornering lights 5 seats Roof rack Tow bar Maximum towing capacity: 3,000 kg * Electric windows * Electrically adjustable and heated exterior mirrors * Bluetooth hands-free kit * USB * AUX * SD card slot * Right sliding door, glazed * Partition wall, glazed * Step Fpjdpoxu Tlmofx Ah Usp * Wooden floor * Load compartment floor with lashing eyes * 180° rear doors * Storage compartment/cubby in cab * Cab lighting: LED Special equipment: * Storage package 2 * Driver and passenger airbags * Passenger airbag can be deactivated * Composition Audio system (radio, SD card interface, MP3 playback) * Electrically adjustable and heated exterior mirrors * Fixing rails for roof rack * 2 foldable remote keys * No lashing rings in vehicle * Cruise control including speed limiter * Front bumper in grey * Additional water heater with stationary heating function and remote control Other features: * Drivetrain: all-wheel drive * Convex exterior mirror, left and right * LED indicators integrated in exterior mirrors * Rubber flooring in cab * Vehicle toolkit * Underbody cladding for improved aerodynamics * Twin headlights * Twin-tone horn * Entry grab handle on rear left and rear right pillars * Assistance system: hill start assist * Assistance system: crosswind assist * Fixed window front left and right in load/passenger compartment * Electric front windows * Laminated windscreen * No partition wall in load area * Grab handles, A-pillar * Rear wing doors without windows * LED interior lights in cab * Body / superstructure: high-roof panel van with double cab * High roof in body color * Child lock in load/passenger area * Fuel tank: 75 liters * Radiator grille with chrome strip on top * Partition wall behind 2nd row of seats * Adjustable steering column * Headlight range adjustment * Truck registration * Side marker lights * Engine 2.0L – 130 kW TDI * Rear fog lamp * Wheelbase: 4,490 mm * Tire repair kit * Euro 6 emissions * Right sliding door with stop position for limited opening * SCR (AdBlue) system * Electro-mechanical power steering * Cloth upholstery * Adjustable front passenger seat * Adjustable driver’s seat * First row of seats in load/passenger area * 3-seater bench * Steel rims 6.5x16 * Engine start/stop system * 12V sockets (2) in cab * Reinforced front axle * Driver’s seat belt warning * Heat-insulating glazing * Central locking with remote control and interior switch * Permissible gross weight: 3.5 t An upgrade to 3.5t maximum towing capacity is optionally available for an extra charge. ++ Exclusive promotion at Autohaus Mat GmbH: Up to €1,000 trade-in bonus – your advantage when changing your vehicle! ++ Contact us for details.

Condition: as good as new (ex-display), Technical data: System: SSI Schaefer Type: K-SW-4300 Included in delivery: 01x side cheek, II. choice length: approx. 4.294 mm Profile type: C115/22/2 C-profile: approx. 115 x 22 x 2 mm Unit weight: approx. 13.23 kg Information: - for KDR levels in PR and WR systems from SSI Schäfer to hold longitudinal & cross profiles as well as roller bars - also suitable with bend Fpodoibl Eyepfx Ah Uop - can be used both inclined and in balance

Condition: used, Year of construction: 2024, operating hours: 360 h, power: 175 kW (237.93 HP), Operating hours: 360, First registration: 24.10.2024 Two-engine version with JCB 55kW / Stage V Dual-sided debris intake, towed Standard equipment Sweeper Controls: Main control panel mounted in the center of the cab with JVM display providing information on a wide range of sweeper functions plus download capability for recorded data. Additionally, the JVM screen can display images from up to four cameras. A separate control console with a palm rest for controlling main sweeping functions is mounted on the door side. Suction fan: Variable suction speed from 1,800 rpm to 3,500 rpm, adjustable to suit different applications. V65t: Higher transmission ratio: 1.79:1 Disc brush (gutter brush): Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cab). Highly visible signal yellow brush plate and hose guide. Suction mouth: Suction mouth made of cast aluminum with 250 mm inlet diameter, tool-free adjustment. Dust suppression system: Spray nozzles for dust control are located at suction nozzle(s), disc brush, and along the front of the vehicle. "Pressadrain" water treatment system. EUnited 4-star certification for PM10. Electrics: 24 V, all external wiring connectors meet IP67 protection standards. External noise/sound power level: LWA 108 dB(A) for engines with standard output, measured according to EC Directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured according to EC Directive 2000/14/EC. Debris container: Superstructure consists of debris container and integrated water tank, manufactured from highly durable stainless steel. Waterproof rear door locking system with safety lock and drainage function. Two side maintenance doors and side storage compartments. A water strainer enables use of the debris container as a large water tank for street flushing. Rear discharge flap, automatic multi-stage debris container support, two protected rear beacons and LED work lights are standard. Container volume 6.5 m³, tipping angle 54° (nominal), door opening angle 125° (nominal). Water tank: The baffle-protected water tank can be filled via an 'A' type hydrant. The double membrane pump is suitable for continuous operation and even dry running. Water volume 1,545 L (optional 2,000 L). Exhaust hood: Smooth-surfaced exhaust hood lined with frequency-matched sound insulation. Brushes: Roller brush Ø 406 mm Roller brush width 1275 mm Suction mouth width 750 mm Fedswxn Uaepfx Ah Uepp Disc brush 500 mm (opt. Ø 650 mm) Optional equipment – Sweeper: - Auxiliary engine: JCB 55kW turbocharged, low emissions according to Stage V, REQUIRES EN590 (or equivalent) LOW SULPHUR FUELS - Sweeping units configured for right-hand operation - Final assembly onto supplied MB Atego 1324 - Air guide screen in debris container, pneumatically raised/lowered - Vibrator for air guide screen, pneumatically actuated - Chain curtain in debris container ahead of air guide screen - Water tank connection coupling Type A, Storz 2 1/2 inch - Wastewater drainage strainer with graded perforation, mounted on rear flap, enables efficient...

Condition: used, functionality: fully functional, color: yellow, Year of construction: 2012, operating hours: 18,560 h, machine/vehicle number: WLHZ1418LZK061324, Year: 2012 Hours: 18k Dimensions and Working Range • Ground Clearance: 255 mm Fpjdpfxjxrf R Ne Ah Uep • Undercarriage Width: 2990 mm • Shipping Length: 11,200 mm • Shipping Height: 3390 mm • Upperstructure Clearance: 1465 mm • Wheelbase: 3000 mm • Width with Stabilizers on Ground: 4700 mm • Tire Size: 12.00-20 1. Boom/Stick Option 2: 7.6 m boom / 6 m stick o Maximum Height: 15,200 mm o Maximum Reach Along Ground: 13,100 mm o Maximum Depth: 3,500 mm Engine and Power • Manufacturer: Liebherr • Model: D 934 L • Gross Power: 150 kW (204 hp) • Displacement: 7 L • Aspiration: Turbocharged with aftercooling, reduced emissions Operational Specifications • Operating Weight (without attachment): 36,015 kg (~79,400 lb) • Fuel Tank Capacity: 580 L (153.3 gal) • Hydraulic System Fluid Capacity: 590 L (155.9 gal) • Operating Voltage: 24 V • Alternator Amperage: 80 A Swing Mechanism • Swing Torque: 84 Nm • Swing Speed: 8.2 rpm Transmission and Mobility • Maximum Speed: 20 km/h (12.5 mph) • Undercarriage Type: Wheeled, with stabilizers for working area safety Hydraulic System • Pump Type: Liebherr variable displacement, swash plate, axial cam piston pumps • Pump Capacity: 245 L/min (64.8 gal/min) • Designed for efficient boom operation and attachment handling Key Features • High-tensile materials for durability and long service life • Versatile boom and stick options for loading, unloading, and material stacking tasks • Suitable for industrial ports, scrap yards, and heavy-duty material handling

Condition: new, Year of construction: 2026, neu 2026 050163 Mai 2026, Zwischenverkauf Taiwan 81300 € 1536.57 € 1015 mm 600 mm 1000 x 400 mm 1000 x 400 mm 670 kg 1100 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2.000 1/min 5,5 kW 1.5 kW 1.1 kW 1.1 kW 3630 mm 2682 mm 2200 mm 4400 x 2300 x 2400 mm 4800 kg 423 kg 670 kg 355 x 50 x 127 mm Fedjwircispfx Ah Uepp 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: new, power: 88 kW (119.65 HP), overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: automatic, loading space width: 1,900 mm, loading space length: 3,050 mm, loading space height: 400 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Your authorized ISUZU specialist dealer – offering expertise, service, and consultation – presents the following offer: ISUZU M21 T GG 3,500 kg Right-hand drive variant with automatic transmission, tipper body, single-circuit hydraulics for gully cleaner operation 2-year manufacturer's warranty on the chassis from the date of first registration or 100,000 km (whichever comes first). Standard equipment: - 1.9 L diesel engine, VGS turbocharger with intercooler, common rail direct injection, 88 kW / 120 hp, EURO 6e EA - Particulate filter system with DPD and AdBlue (self-cleaning system allows filter regeneration without workshop visit; with the DPD technology, you are notified when regeneration is required – simply press the DPD button and the system cleans itself in 20 minutes) - 6-speed automatic gearbox - 205/75 R16 C tires - Independent suspension at the front, leaf spring suspension at the rear, front disc brakes, rear drum brakes - Maximum speed 120 km/h - New, modern cab with excellent space utilization, generous headroom and substantial legroom, outstanding ergonomics and visibility, low step-in height - Bi-LED front headlights with headlamp cleaning system - Paint: Arc White 729 - Dimensions: cab width 1,815 mm, rear axle width 1,625 mm, height 2,145 mm (top of cab) - Passenger double bench seat, 3-seater, headrests - Driver and passenger airbags, seatbelt pretensioners for driver and passenger - Height- and tilt-adjustable steering wheel - Steering wheel controls - Electronic immobilizer - Electric parking brake + Auto Hold HSA system, acting on the prop shaft - Power windows - Mirrors with integrated reversing camera - DAB+ radio with Bluetooth, USB, 6.2" display - Driver information display 7" - LED daytime running lights, automatic lighting - Central locking with remote - Air conditioning Safety features include: - ABS: anti-lock braking system - ASR: traction control/rear axle anti-slip regulation - EBD: electronic brakeforce distribution - EVSC: electronic stability control - LDWS: lane departure warning system - MOIS: moving object detection - DWS: distance warning system - MAM: emergency braking for obstacles - FVSN: forward vision recognition - DDAW: driver drowsiness alert - TSR: traffic sign recognition - TPMS: tire pressure monitoring system - AEBS: autonomous emergency braking system - RM: reversing camera with monitor Fodpfx Ahsxuxtvo Uspp - AEBS for pedestrian and cyclist protection Body: Lightweight 3-way aluminum tipper, approx. 3,050 x 1,900 x 400 mm - Robust side and rear panels, folding, rear panel pendulum-mounted with automatic release - Tipper floor made from 3 mm thick aluminum - Ladder rack with protective grille, aligned with cab roof height - Hot-dip galvanized tipping platform - 6 recessed lashing eyes in the floor - Electrohydraulic tipping function - Plastic mudguards with splash guards Additional equipment: Single-circuit hydraulic system for operating a gully cleaner unit - Engine-mounted hydraulic pump, engageable via magnetic clutch - Oil tank, pipework/hoses/quick couplings - The required two hydraulic connections for the gully cleaner are installed on the right below the tipper body - Rear tipping function is maintained when the gully cleaner is connected - Additionally: separation points for hydraulic lines at the rear crossmember for lateral tipping (to the right or left) - Chassis corrosion protection for the underside - All-season tires 205/75 R16 C M+S - 2 LED work lights (1 rear on roof, 1 lateral below)

Condition: new, Year of construction: 2024, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement Fodpfor H Df Ijx Ah Ujpp - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: good (used), Technical data of the shelf rack: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1.340 mm Number of bays / shelf row: 01 pcs. á 1.290 mm Number of levels plus floor level: 04 pcs. Included in delivery: 02x shelf uprights, used Material color: sendzimir galvanized frame profile dim: 50 x 55 mm adjustment grid: 25 mm incl. cross and diagonal braces The uprights are pre-assembled 1.200 mm high 610 mm deep 04x shelves, used Material color: sendzimir galvanized dimensions: 1.275 x 575 x 30 mm weight / pcs.: approx. 4,78 kg max. load per shelf with evenly distributed load: 120 kg 04x Balance plates, new Fpsdpfxopahwyj Ah Uep Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 04x shelf crossbars, used total length: 1.275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. weight / pcs.: approx. 0,84 kg Material color: sendzimir galvanized 01x load plate with data of field and compartment loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm Remark: Since this is a used item, damage, rusting or the like may be present. may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Year of construction: 2014, operating hours: 8,800 h, Beautiful machine – well equipped!!! Liebherr Wheel Loader L 542P 2 plus 1 Serial number: VATZ1269KZB036900 Year of manufacture: 2014 Operating hours: approx. 8,800 Liebherr 4-cylinder inline engine, water-cooled, with turbocharger and intercooler, 156 hp. Hydrostatic travel drive with 3 speed ranges: Travel range 1: 0 – 6.0 km/h, Travel range A1-2: 0 – 16.0 km/h, Travel range A1-3: 0 – 36.0 (40) km/h * Air conditioning * BSS ride control system (oscillation damping) * Central lubrication system (factory installed by Liebherr) * 3rd hydraulic control circuit, e.g. for high-tip bucket, grapple bucket, sweeper, etc. * Engine air intake with TOP-AIR pre-filter * Premium display with touchscreen * Comfort operator seat with pneumatic suspension * Steering wheel adjustable for tilt * 4 working lights on front of cab roof * 4 additional lights on rear of cab roof * Rotating beacon (yellow) on cab roof, center * Battery disconnect switch * Radio * Rear fender extensions (rubber) * Rear distance warning right/left (acoustic signal) Permissible gross weight: 17,000 kg Operating weight: approx. 14,500 kg Machine width: 2,500 mm Tires 20.5 x 25 VA L4 – 80% Tires 20.5 x 25 HA L4 – 80% Offer includes hydraulic quick coupler and bucket approx. 2.8 m³: €46,900 net Additional equipment available at extra charge: - 4-in-1 bucket (grapple/dozer bucket), 2 m³: €3,950 - High-capacity bucket, 5 m³: €3,990 - Bucket with clamp, from 2.0–3.5 m³: €3,660 - High-tip bucket, from 2.5–5.5 m³: from €5,990 - Pallet forks, 5 tons: from €1,950 All prices are net plus VAT or for export Fpedoxuymkspfx Ah Uep Sale only to businesses or for export. Sold as seen, in as-is condition. No warranty or guarantee. The indicated mileage or operating hours are read from the meter; we do not guarantee their accuracy! Subject to prior sale. This vehicle description does not constitute a binding offer and the details provided are not to be considered as guaranteed characteristics. The description and the details therein serve only for general identification of the machine and do not represent a legal warranty. The information is not guaranteed to be complete. The descriptions, specifications, and images are non-binding and do not represent guaranteed characteristics. Only the agreements in the order confirmation and invoice shall apply. The seller assumes no liability or warranty. The listing may contain typographical or data transmission errors. The machine has not been inspected by the seller. Equipment details may need to be checked separately. We are happy to consider your vehicle as a trade-in. For further questions, please contact us. For our international customers, we prepare all customs and export documents for trouble-free export.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Fpjdpfx Ahevvkips Usp

Condition: new, Year of construction: 2025, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality Fpsdpeqzxhyjfx Ah Uop Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 114800 € 2169.72 € 1200 mm 730 mm 1.200 x 500 mm 1.200 x 500 mm max. 30 m/min 3.7 kW 27 kVA kW 4600 mm 3040 mm 2200 mm 6400 kg Fpjdpfx Aswiq Hmjh Ujp 990 mm 930 kg 1250 kg 405 x 50 x 127 mm 0,001 mm 500 - 2.000 U/min 11 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed (X axis) 30 m/min vertical feed by servo drive and ballscrew spindle transversal feed by servo motor and ballscrew spindle double V-slide wasy (turcite-B) for table longitudinal move grinding wheel spindle on 6 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: used, Year of construction: 2020, operating hours: 6,600 h, Liebherr L 546 P 2plus1 Machine Delivery: 13.11.2020 Chassis No.: VATZ1755 CZB061536 Year of manufacture: 2020 Operating hours approx. 6,600 4-cylinder in-line engine, 120 kW / 188 hp, water-cooled with turbocharger, Emissions Stage V Operating weight approx. 14,300 kg | Perm. total weight 18,000 kg Brakes: Self-locking hydrostatic drive acts on all 4 wheels with additional hydraulic accumulator brake system with wet disc brakes integrated in the differential housing (two separate brake circuits) Hydrostatic travel drive with 3-speed transmission Automatic central lubrication system, factory-installed by Liebherr Automatic climate control – maintains preset temperature Refrigerator box in cab 3rd hydraulic control circuit for attachments such as high-tip bucket, grab bucket, etc. Ride control BSS – lifting gear damping Access aid in front of windshield for easier cleaning Lint screen prevents radiator contamination Coarse-mesh radiator – for easier cleaning Reversible fan for radiator cleaning (reverse operation) Air filter with "TopSpin" pre-separator for pre-cleaning intake air Premium touchscreen display "Comfort" driver’s seat with pneumatic suspension and seat heating Left armrest Tilt-adjustable steering column Radio Lamp bracket for front headlights in steel instead of plastic 2 LED work lights on rear of cabin roof 2 LED work lights on front of cabin roof Sun blinds front and rear Rear monitoring via monitor in display Automatic engine shut-off after 5 minutes at idle speed Speed limit 20 km/h Reinforced rear bumper/larger rear counterweight Net price with quick coupler and bucket: €82,900 + VAT · Tyres 20.5 x 25 L3 FA: 2 x 40% tread · Tyres 20.5 x 25 L3 RA: 2 x 40% tread Automatic self-locking differentials, 45% lock value on both axles Optional equipment at extra cost: · Grab bucket 2.0 to 3 cubic meters: €3,680 · High-volume bucket 5 cubic meters: €3,990 · High-tip bucket from 3 to 5.5 cubic meters: from €3,950 · Pallet fork 5 or 8 tonnes: from €2,190 Also available with on-board weighing system, if required All prices are net export – Domestic sales plus 19% VAT We can arrange transport to your location upon request. Sales only to commercial customers or for export. Sold as-is, where-is. No warranty or guarantee. Stated mileage and operating hours are read from the odometer or hour meter; we accept no responsibility or guarantee for their accuracy! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided is not to be considered guaranteed characteristics. The description and information serve solely for general identification of the vehicle and do not constitute a warranty in the legal sense of sale. Information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed features. Only the details in the order confirmation and invoice are decisive. The seller assumes no liability/warranty. The ad may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment must be separately verified if necessary. Fpsdpfx Aswrlc Uoh Ujp

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Fedpfovvi Nzex Ah Uspp

Condition: new, Year of construction: 2026, neu 2026 050162 Mai 2026, Zwischenverkauf Taiwan 65760 € Fpjdpfxjwiqyte Ah Uop 1242.86 € 800 mm 610 mm 800 x 400 mm 800 x 400 mm 810 mm 5 - 25 m/min 0.74 kW 10 kVA kW 3540 mm 2080 mm 2100 mm 2900 kg 980 mm 350 kg 355 x 50 x 127 mm 0,001 mm 500 - 1.800 U/min 3,75 kW 1.1 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * grinding wheel grinding wheel flange grinding wheel balancing stand LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH * The exact configuration of the dresser must be clarified before ordering

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Fsdpsvvi N Isfx Ah Ujpp

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Fpodpfxjvvi Rfj Ah Ujp

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Fsdovvi Scjpfx Ah Uopp