Used Turn Band for sale (11,667)

Condition: good (used), Year of construction: 2007, 1 used band saw manufactured by Bauer type SA 320 year 2007 Technical data: Kodsttbf Rjpfx Abvodn Type Electrical connection 3 x 400 V / 50 Hz Motor power 3000 W Speed levels 2 Saw blade speeds 30- 120 m/min Saw blade dimensions 4150 x 34 x 1.1 mm Table height material feed 800 mm Cutting capacities Cutting capacity 0° round profile 320 mm Cutting capacity 0° round full 320 mm Cutting capacity 0° square material horizontal 320 x 320 mm Cutting capacity 0° square material upright Coolant pump

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter Kdsdpfxoqqivvo Abvjn 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: used, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 410 mm, control type: CNC control, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment Kdsdpfjytvqqox Abvjn - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Kdodewuqbbepfx Abvjn Flat (W x H): 400 x 320 / 210 x 320

Condition: good (used), Year of construction: 1997, 1 used vertical band saw Manufacturer: Jaespa Type: MSP 4 Year of manufacture: 1997 Roller diameter: 420 mm Cutting height: 280 mm Cutting width (overhang): 405 mm Cutting speed: 25-280 m/min Table size: 600 x 600 mm Tiltable: 15° / 45° Material support height: 955 mm Band length min/max: 3200/3400 mm Dimensions and weights Length: 1250 mm Width: 1000 mm Ksdpfx Abjzb Izkjvsdn Height: 2030 mm Net weight: 470 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, OPPORTUNITY – IMMEDIATELY AVAILABLE HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE MANUFACTURER: BEHRINGER MODEL: HBM 440 A PC-E YEAR OF MANUFACTURE: 2015 Sawing capacity round: 440 mm Sawing capacity flat (W x H): 440 x 440 mm Minimum round / flat: 30 mm / 20 x 20 mm Saw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Cutting speed: 20 – 200 m/min Material feed per stroke: 600 mm Material feed, multiple: max. 5400 mm Machine weight: 8,200 kg Dimensions (L x W x H): 6500 x 5000 x 2700 mm Transport height: 2400 mm Specifications subject to change – errors excepted Equipment: - Coolant system 200 l - Full enclosure of the saw - Material infeed support, 1650 mm length - Chip conveyor - BEHRINGER CNC dialogue computer IP 65, BEHRINGER dialogue control IP 65 - Automatic bar change - Sorting unit in portal design: - Usable stroke of gripper: 4660 mm - Depth of storage: 2000 mm - Max. cut-off length: 4000 mm - Max. single workpiece weight: 1500 kg - Infeed magazine KM 45 F-VR / 600-6,200: - Round material: 50 – 440 mm Kdedpsxwqm Hefx Abvsn - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Powered roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence PRIOR SALE AND AVAILABILITY RESERVED

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Cutting capacity up to approx. Ø 260 mm Robust cast construction Manual feed and hydraulic cutting cycle Kdodowbfhcjpfx Abvsn Swivel head for angular cuts Integrated coolant system Ideal for workshops and industrial use

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Kdsdpjwztq Eofx Abven Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Kedpfx Aoyrpmcsbvedn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2025, operating hours: 57 h, Colour: Grey Weight: 11.600 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 24111638 Ksdpfx Abex Npwwsvjdn - Operating hours: 57 - Saw direction: Horizontal - Main motor power [kW]: 30.0 - Max. cutting height [mm]: 940 - Table length [mm]: 6000 - Table width [mm]: 1050 - Fuse [A]: 100 - Power [kW]: 51.0 - Transport weight [kg]: 11600kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Colour: Grey Weight: 2.000 kg - Details: - └ Description: Shaft of the drive rollers is loose with the machine - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 Ksdoym Rt Hspfx Abvedn - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Kjdpfx Abjy T Dqyjvedn

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Kdjdpfx Abezc Agkoven Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC-Steuerung Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Ksdozc Dy Ejpfx Abvodn Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW Kjdpfezcgkmjx Abvjdn weight of the machine ca. / t required space / m

Condition: used, diameter / mm weight / kg Kdedpfx Abszcgf Rovon Type / 0

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Kdjdpfx Ajzc Hipebven Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: Kedpfow Hg Nljx Abvodn * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: good (used), operating hours: 37,000 h, functionality: fully functional, Portal machine Nakamura WT-250_MMY, Fanuc control 31i-TA, Year of manufacture 2007, only just under 37,000 production hours, Counter spindle, Nakamura CNC portal GR-210 (up to 2 x 10 kg), max. A-Dm 220 mm, max. L 95 mm, Nakamura 14-position stack magazine, Occasional part rejection for temporary inspection, External air purification, Accessories: 2 SMW units 3-jaw chuck for left/right spindle, Coolant cyclone filter system, including 2 coolants HD pumps including pre-filters, including coolant immersion cooler, Hinged belt chip conveyor, Kdodpfx Abszcdpysvon Oil mist extraction unit, Assortment of fixed and rotating tool holders.

Condition: used, Year of construction: 1974, Roller diameter: 600 mm, with drive mechanism, belt guide at the top and bottom, tilting table, new motor with parallel stop. Motor power: 2.2 kW. Kodpfx Asy R Tqkobvodn Location: Nattheim.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, CNC-Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: ML 20 C5Y2 Basic | Year of construction: 2020 The machine can be inspected by appointment under power. Condition: Fully functional, well-maintained / ready for use. Operating hours: approx. 19.498 h TECHNICAL SPECIFICATIONS: - Axes: 8 - Turning diameter over bed: 32 mm - Spindle bore: 20 mm - Channel 1/Z1 > Spindle stroke: 220 mm - Main spindle speeds: 8.000 rpm - Spindle motor: 5.5 / 3.7 kW - Tailstock bore: 20 mm - Tailstock speed range: 8.000 rpm - Channel 2/Z2 > Turning length (counter spindle): 240 mm - Clamping chucks 161E - Drive motor power: 5,5 / 3,5 kW - Total power requirement: 19,4 kW / 35 A - Machine weight: approx. 4,2 tons - Space requirements: approx. 8,0 x 2,7 x 2,2 m EQUIPMENT: - CNC-Control: FANUC 31i-B - 1 x counter-spindle - NC C-axis on main and counter-spindles - DM12 guideway - Tool holders for 5 fixed turning tool holders, cross-section 12 x 12 mm - Bar loader, FMB Turbo model, Ø 3–36, year of manufacture: 2020 - Chip conveyor - Electronic handwheel - KNOLL high-pressure system (50 bar) with paper belt filter system - Fire protection system, Brand: Kraft & Bauer - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Kdsdpfx Ajy Sp Smobvjn

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: MLK 26F1.5 | Year of construction: 2018 The machine can be inspected by appointment under power. Condition: Well maintained, fully functional / ready for use. Operating hours: approx. 28.797 hours. TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 32 mm - Channel 1/Z1 > Spindle stroke: 180 mm (short-run configuration), 340 mm (long-run configuration) - Main spindle speed: 6.000 rpm - Spindle motor power: 5.5 / 3.7 kW - Channel 2/Z2 > Turning length (counter spindle): 340 mm - Counter spindle speed range: 8.000 rpm - Clamping chucks: 1536E - Drive motor power: 5.5 / 3.5 kW Kdodpoy Sp Twefx Abvon - Total power requirement: 28,7 kW, 60 A - Machine weight approx.: 4,4 tons - Space requirements: approx.: 8,0 x 2,7 x 2,1 m ACCESSORIES / EQUIPMENT: - CNC control: FANUC 31i-B - 1 counter-spindle - NC C-axis on main and counter-spindles - Tool holders for 5 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, make: FMB Turbo Ø 3–36, year of manufacture: 2018 Guide channel DM12 - Chip conveyor - Electronic handwheel - High-pressure system, make: KNOLL, 50 bar with paper belt filter system - Fire protection system, make: KRAFT & BAUER - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Accessories / Equipment: - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions Kodoxt Uqhepfx Abvsdn - Pick-up station - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit Kodpfsx Enqusx Abvodn - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: used, Year of construction: 2003, Technical details: Kdjdpfx Aszcnq Isbvon weight of the machine ca.: 9,5 t