Used Turn Band for sale (12,396)

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min Dwsdpfx Apjk Dvhdo Ijc weight 65 kg total power requirement 0,6 kW dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch - User manual in English

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Maximum turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Dwodpfx Apsyx U Its Ioc Machine price: €31,950 excluding VAT (no tooling included) Machine + VDI40 toolholders (13 driven + 17 fixed): €38,500 excluding VAT This machine is available for inspection in Genk!

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 50 - 2000 mm/min weight 65 kg total power requirement 0,6 kW dimensions of the machine ca. 0,8 x 0,6 x 0,6 m roller block - Torch tripod - Speed infinitely variable - foot switch Djdpfxovn U E Se Ap Ijwc - User manual in English

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm Dedpowzbq Tjfx Ap Iewc B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: used, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 410 mm, cutting width (max.): 480 mm, control type: manual, roller diameter: 500 mm, pivoting range: 46 °, actuation type: electric, rotational speed (max.): 900 rpm, overall weight: 250 kg, table height: 850 mm, SAC BW 500 Band Saw For sale is a robust SAC BW 500 band saw for professional woodworking. The machine impresses with its solid construction and generously sized work table. The band saw table is made of gray cast iron, heavily ribbed, precisely planed, and adjustable in angle. The band saw features mechanical height adjustment, a blade tension indicator, and an upper precision band saw guide. The parallel fence can be used on both the left and right sides of the band saw blade. Features: - Manufacturer: SAC - Model: BW 500 - Wheel diameter: 500 mm - Cutting width: up to approx. 480 mm - Cutting height: up to approx. 410 mm - Table size: 550 x 700 mm - Table height: approx. 850 mm - Band saw length: approx. 4,100 mm - Blade dimensions: 25 x 4/10 mm - Wheel speed: 900 rpm - Motor power: 3 HP - Mechanical height adjustment - Blade tension indicator - Rubber tires - Adjustable gray cast iron table - Dust extraction port - Upper precision band saw guide - Telescopic guard - Motor protection switch with undervoltage release - Electrical system according to VDE 0113 - Parallel fence can be used on both sides The technical specifications correspond to the SAC product brochure for the BW 500. It describes, among other things, the solid gray cast iron construction of the wheels and the table, as well as the rubber tires for smooth and precise operation. sac_bw_de The machine is in used condition, with signs of wear consistent with its age. Ideal for carpenters, joiners, and woodworkers looking for a solid and durable band saw. Dsdpfez Ig Ryex Ap Ijwc Inspection and test run possible by arrangement.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and Milling Center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of Construction: 2000 / Refurbishment cost: 200,000 Euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical Data: See attached PDF Max. turning diameter: 570 mm Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Djdpfx Aozxg Suop Iowc Distance between centers: 1,828 mm Main spindle: Speed range: 35 - 3500 min-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Tailstock: Tailstock spindle speeds: 50 - 3500 min-1 Tailstock power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2 - 6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm C-axis: 0.001° Milling spindle: Spindle speeds: 8000 min-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min Max. feed rate: 30,000 mm/min / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, Steady rest: 30 Tailstock: Not required 31 Tool magazine capacity: 42 32 Chip conveyor: Available 33 Chip conveyor type: Slatted belt 34 Chip container: Available 35 Cooling system: Standard (635 W / 1040 W) 36 Coolant supply through the tool spindle: Available 37 Compressed air cleaning of chuck (spindle 1): Available 38 Compressed air cleaning of chuck (spindle 2): Available 39 Tool presetter (in the machine, spindle 1): Automatic 40 Bar loader: Interface only 41 Measuring system X-axis: Heidenhain 42 Signal light: 3-stage signal tower (red, milky white, green) 43 Foot switch for chuck: Double foot switch 44 Steady rest: Automatically centering steady rest (programmable) 45 Type of automatically centering steady rest: SLU3 (SMW) 46 Steady rest unit (SMW): Available 47 Automatic door: Available 48 Hydraulic fluid (fluorocarbon): Not compatible 49 Number of total counters: 1 50 Number of workpiece counters: 1 51 Automatic shutdown: Available 52 Language of NC screen: Spanish 53 Language of PC screen: Spanish 54 Language of warning screen: Spanish 55 Memory capacity for part program (m): 1160 m 56 Number of stored programs: 125 57 Number of tool correction pairs: 240 58 Optional sentence masking: Softkey version 59 Programmable data input: Available 60 Number of shared variables for user macros: 600 61 Tool life monitoring: B 62 Number of tool life monitoring (MORI): MAX. 128 PAIRS * 4 63 LOAD MONITORING: B

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Dwsdpjdx Elmofx Ap Isc Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Dwsdpfx Aexx Uxiep Isc

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, turning length: 1,073 mm, turning diameter: 380 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 1,100 mm, bar passage: 81 mm, total height: 1,960 mm, total length: 3,805 mm, total width: 2,100 mm, overall weight: 5,800 kg, Equipment: documentation/manual, Hyundai WIA SE2600LSY is a high-performance CNC turning centre equipped with a Y-axis and sub-spindle for complete machining of complex components in a single setup. The machine features a FANUC i-Series control, BMT55 live tooling with speeds up to 6,000 rpm, and a maximum turning diameter of 380 mm. It is equipped with a 10" main spindle and 6" sub-spindle, providing excellent flexibility for both turning and milling operations. Dwsdpfxjz Izngo Ap Ijc Optional equipment included: Automatic tool setter 15 bar high-pressure coolant pump Chip conveyor with chip container Bar feeder interface Parts catcher Standard set of tool holders, including 2 + 2 live tool holders

Condition: good (used), Scherer Feinbau PM 1 FZ precision lathe, finishing lathe, lathe similar to Weiler, with extensive accessories as shown in the pictures. Equipment: - Hand lever cross slide with Multifix quick-change system design - Collet chuck with draw-in collets Dwjdpfxez Ip Rij Ap Iec Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest diameter over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures. Shipping by arrangement.

Condition: used, Year of construction: 2003, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW Dedsz At Ukspfx Ap Ijwc toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck but with 12 pieces tool holders Capto 5.

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. Dsdpfjz I Ig Njx Ap Iowc At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: ready for operation (used), functionality: fully functional, Biglia 510 2T lathe with hydraulic spindle and automatic tool changer turret, designed for fitting production. Included with the machine is a second chip conveyor and spare drive components for the numerical control, previously removed from an identical machine. Dwjdpfoz Nwmcjx Ap Isc

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. Dsdpfx Apozy H Dyj Ijwc 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, CNC Control MSX-850 Maximum turning diameter: Ø 420 × 720 mm X/Z axis travels: 280 / 820 mm Swing over bed: Ø 995 / Ø 825 mm Dwodpfx Ajzz Ak Ejp Iec Maximum bar diameter: Ø 90 mm Rapid traverse X/Z: 30 / 30 m/min Main spindle diameter: Ø 300 mm Main spindle speed: 3,000 rpm Main spindle power: 22 / 18.5 kW Main spindle nose: A2-8 Number of motorized turret positions: 12 Tool speed / power: 6,000 rpm / 5.5 kW

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Bandall BA32-20-62 model BbB - Branding by Banding year 2019 band width 60mm max. product width 320 mm Dsdevmphlspfx Ap Iowc max. product height 200 mm external reel holder with double buffer PEM printer print register device stainless steel covers - suitable for food industry checked and cleaned by a certified Bandall service company

Condition: excellent (used), Year of construction: 2002, Cutting capacity: approximately 230 mm (round), 230 mm (square), 280 x 150 mm (flat material) Cutting speed: 15 – 110 m/min Miter cuts to the left: 45°/60° Automatic workpiece feed Hydraulic lowering Micro-spray system Dwjdoz Dk Rcepfx Ap Iec Coolant system Workpiece clamping device Roller conveyor

Condition: ready for operation (used), Year of construction: 1988, operating hours: 36,452 h, Boley BDN 160 ZB Dwodpfx Aewwbatep Isc including LNS Hydrobar bar feeder manuals various tools

Year of construction: 2020, condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Dsdpsiryf Sofx Ap Ijwc Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: good (used), Bandsa for re-sawing blocks and planks type Canali multiline ML 1100 with 3 band saw units Sawpully, width 105 mm, max width of saw blade 120 mm. Speed of the bandsaw blade 28/32/36/42 m/sec Feed-work has below measurements. - Height of feed rollers 200 mm - Diameter of feed rollers 100 mm - Max opening saw blade to anvil side 230 mm - Max opening saw blade to pressure side 230 mm Dwjdpoz Hbh Defx Ap Isc - Max opening Center cut 460 mm

Condition: excellent (used), Year of construction: 2012, CNC turning and milling center Gildemeister CTX Beta 1250 4A with Sinumerik 840D Shopturn Year of manufacture: 2012 Program running hours: approx. 20,000 hours GEARING OPTION ACTIVATED Technical data: Main spindle speed: Drive power: 32 kW ISM 102 Counter spindle speed: Drive power: ISM 76 Y-axis slide 1 Driven tools 1x12 on slides 1+2 Bar loader package Workpiece gripper can be used on both main and counter spindles Coolant system Djdpfx Apoyfcrrj Iewc Chip conveyor

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No serial production. Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW Dsdpfjzvqclex Ap Iswc cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Cable cross-section: 5×6 mm² If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, For sale is a Gildemeister CTV 160, suitable as a source of spare parts or for dismantling. Various mechanical, electrical, hydraulic, and control components are available, including Siemens/SINAMICS components. Individual parts can also be sold separately, upon request. Please refer to the images for the condition and equipment. Djdpfsz Ihb Hox Ap Iswc Price on request / open to offers.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Dodpfx Aefm T Hbop Iowc Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, weight max. 1000 Kg workpiece diameter 20 - 800 mm drum diameter 200 x 50 mm feed 80 - 1600 mm/min total power requirement 0,23 kW Dsdpfsupxkksx Ap Iowc dimensions of the machine ca. 2 Stk. 0,45x,039x0,33 m