Used Turning Insert for sale (9,612)

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Iodjq T I Izopfx Abvjau Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Iodpfx Aboqqivvsvsau Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 Iajdpfx Abewztq Eevou B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC-Steuerung Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: Ijdpfx Aszc Dy Eebvjau - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, diameter / mm weight / kg Iasdpfszcgf Rsx Abvou Type / 0

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. Iajdszc Hipopfx Abvsu VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Iasdpfx Aow Hg Nlsbvou YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: good (used), operating hours: 37,000 h, functionality: fully functional, Portal machine Iodpfjzcdpysx Abvjau Nakamura WT-250_MMY, Fanuc control 31i-TA, Year of manufacture 2007, only just under 37,000 production hours, Counter spindle, Nakamura CNC portal GR-210 (up to 2 x 10 kg), max. A-Dm 220 mm, max. L 95 mm, Nakamura 14-position stack magazine, Occasional part rejection for temporary inspection, External air purification, Accessories: 2 SMW units 3-jaw chuck for left/right spindle, Coolant cyclone filter system, including 2 coolants HD pumps including pre-filters, including coolant immersion cooler, Hinged belt chip conveyor, Oil mist extraction unit, Assortment of fixed and rotating tool holders.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, CNC-Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: ML 20 C5Y2 Basic | Year of construction: 2020 The machine can be inspected by appointment under power. Condition: Fully functional, well-maintained / ready for use. Operating hours: approx. 19.498 h Iajdpfx Asy Sp Smobveu TECHNICAL SPECIFICATIONS: - Axes: 8 - Turning diameter over bed: 32 mm - Spindle bore: 20 mm - Channel 1/Z1 > Spindle stroke: 220 mm - Main spindle speeds: 8.000 rpm - Spindle motor: 5.5 / 3.7 kW - Tailstock bore: 20 mm - Tailstock speed range: 8.000 rpm - Channel 2/Z2 > Turning length (counter spindle): 240 mm - Clamping chucks 161E - Drive motor power: 5,5 / 3,5 kW - Total power requirement: 19,4 kW / 35 A - Machine weight: approx. 4,2 tons - Space requirements: approx. 8,0 x 2,7 x 2,2 m EQUIPMENT: - CNC-Control: FANUC 31i-B - 1 x counter-spindle - NC C-axis on main and counter-spindles - DM12 guideway - Tool holders for 5 fixed turning tool holders, cross-section 12 x 12 mm - Bar loader, FMB Turbo model, Ø 3–36, year of manufacture: 2020 - Chip conveyor - Electronic handwheel - KNOLL high-pressure system (50 bar) with paper belt filter system - Fire protection system, Brand: Kraft & Bauer - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Turning Automatic Lathe - Longitudinal | Brand: MAIER | Type: MLK 26F1.5 | Year of construction: 2018 The machine can be inspected by appointment under power. Condition: Well maintained, fully functional / ready for use. Operating hours: approx. 28.797 hours. TECHNICAL SPECIFICATIONS: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 32 mm - Channel 1/Z1 > Spindle stroke: 180 mm (short-run configuration), 340 mm (long-run configuration) - Main spindle speed: 6.000 rpm - Spindle motor power: 5.5 / 3.7 kW Iasdpfjy Sp Twsx Abvou - Channel 2/Z2 > Turning length (counter spindle): 340 mm - Counter spindle speed range: 8.000 rpm - Clamping chucks: 1536E - Drive motor power: 5.5 / 3.5 kW - Total power requirement: 28,7 kW, 60 A - Machine weight approx.: 4,4 tons - Space requirements: approx.: 8,0 x 2,7 x 2,1 m ACCESSORIES / EQUIPMENT: - CNC control: FANUC 31i-B - 1 counter-spindle - NC C-axis on main and counter-spindles - Tool holders for 5 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, make: FMB Turbo Ø 3–36, year of manufacture: 2018 Guide channel DM12 - Chip conveyor - Electronic handwheel - High-pressure system, make: KNOLL, 50 bar with paper belt filter system - Fire protection system, make: KRAFT & BAUER - Extraction system - Documentation - CE marking Additional accessories are available for purchase. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Multifunctional CNC Turning, Boring and Milling Centre / Manufacturer: WFL Type: M120 MILLTURN x 3000 / Year of construction: 2008, Overhauld in 2025 TECHNICAL DATA: Working range: - Centre distance / turning length (depending on clamping device): 3.000 mm - Swing diameter over bed (max. nominal dimension): 1.220 mm - Swing diameter over top of slide: 1.140 mm Accessories / Equipment: - Siemens SINUMERIK 840D CNC control pl - Turning/drilling/milling unit - NC tailstock - External tool magazine, 90-positions Ijdpfx Absxt Uqheveau - Pick-up station - Cooling system - Chip conveyor - Further extensive equipment ... Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 9,5 t Iasdpfx Aezcnq Iobveu

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m Iaodpsvivx Nsfx Abvju CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Iaedpfjy Ivyiex Abvsu Coolant system 980 liters with belt filter Conveyor belt Oil mist separator Chip conveyor without bar feeder

Condition: good (used), Year of construction: 2015, Main and counter spindle 3 turrets Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Bar feeder FMB Turbo 2-20 Iajdpsyx Tk Tsfx Abvju

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Iaodpfezdtkhsx Abvou

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis - Subspindle Iaedpfx Abozb N Uxjveu - WITHOUT extraction system

Condition: new, New Siemens SIMODRIVE 611 digital control module. The device is unused. The original packaging has been opened. Manufacturer: Siemens Product series: SIMODRIVE 611 Type: 6SN1118-0DK21-0AA0 Version: A Device type: Digital control module Iodpjzcgyhsfx Abvoau Design: High Performance Number of axes: 2 axes Weight: 0.78 kg

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Iaodpfxsxxm Hfe Abvju Production time: 26,500 With MBL Bar Feed

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Isdpfx Abszc Id Ujvsau Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: used, Year of construction: 2008, Technical details: x-travel: 850 mm y-travel: - mm z-travel: 315 mm swing diameter: 420 mm Iaedpfx Abozcn Tpsvsu spindle speed:: 3400 U/min feed power: 11 kN tool taper: VDI 50 workpiece height max.: 160 mm workpiece diameter:: max. 340 mm tool changer with: 12 places feed power: 11 kN Total power requirement: 45 kW Weight approx.: 10 t complete plant: 5,3 x 4,19 x 3,5 m dimension machine xH: 3,8 x 1,45 x 3,5 m • Highly productive CNC vertical turning machine • Perfect for high-volume and mass production • Loading time: 4–6 seconds (depending on workpiece and clamping device) • Chip-to-chip time: 8–10 seconds (depending on process and workpiece) • Spindle nose: DIN 55 026 – Size 11 • Front spindle bearing diameter: Ø 160 mm *

Condition: used, Year of construction: 2007, Technical details: x-travel: 680 mm y-travel: - mm z-travel: 250 mm swing diameter: 340 mm spindle speed:: 3400 - 4300 U/min tool changer with: 12 places spindle diameter in front bearing: 120 mm rapid traverse x + z axis: 45 / 30 m/min Total power requirement: 43 kW Weight approx.: 12 t complete plant: 9,0 x 4,0 x 3,3 m dimension machine xH: 3,8 x 1,5 x 3,3 m • Highly productive CNC vertical turning machine Iajdpezcn Tcjfx Abvou • Perfect for high-volume and series production • Commonly used in the automotive industry • Includes various accessories and live tooling (powered tools) *

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Ijdpfx Aezbqg Nsbvsau

Condition: used, Year of construction: 2000, max swing 700 mm, X/Y 255/520 mm, 12-position upper tool turret and 8-position lower tool turret with driven tools, measuring head, tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15 t Iodpfx Aboym Sx Deveau

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. Iaodpfx Aov N N Spobvou 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.