Used Turning Lathe for sale (9,562)

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Isdjvivx Nopfx Ahyetb Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: reconditioned (used), Year of construction: 2017, For sale: CNC Swiss-type lathe TORNOS GT 26/6 II, including bar loader Manufacturer: TORNOS Itsdsx N Dg Tjpfx Ahyeb Model: GT 26/6 II Year of manufacture: 2017 Max. bar capacity: 26 mm CNC control: FANUC High-dynamic turning and milling operations Suitable for complex series production parts Axis / spindle concept – TORNOS GT 26/6 II Spindle concept: • 1 main spindle • 1 counter spindle • Synchronized machining for highly productive series manufacturing Axis concept: Linear axes: • X1 / Z1 – main spindle • X2 / Z2 – counter spindle • X3 – cross machining / additional tools C-axes: • C1 – main spindle • C2 – counter spindle Number of CNC axes: • 6 CNC axes Machining capabilities: • Simultaneous main and counter spindle operation • Milling and cross machining with C-axes • High process integration and short cycle times Machine weight: approx. 3,200 kg Transport dimensions (L × W × H): approx. 3,200 × 1,800 × 2,000 mm Bar loader Weight: approx. 700 kg Dimensions (L × W × H): approx. 3,500 × 800 × 1,500 mm We can also offer commissioning service upon request. The machine can be inspected by appointment near Heilbronn. Loading can be provided. Technical data, accessories, and machine descriptions are subject to change and non-binding.

Year of construction: 2007, operating hours: 24,593 h, condition: used, machine/vehicle number: 5010481, Max. turning diameter: 340 mm, max. turning length: 750 mm, max. spindle speed: 4,000 rpm, chip conveyor, TX 8I control system, 12-position turret Itsdpfx Ahsx Akmqjyob

Condition: used, Year of construction: 2008, feed length Z-axis: 600 mm, spindle speed (max.): 8,000 rpm, Model Year: 2008 Width: 1,150 mm Length: 600 mm Height: 600 mm Number of Axes: 4 Tool Holder: BT40 Spindle Speed (rpm): 8,000 Itodpfx Ahox S I Tioysb Processable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL LATHE • Table Ø 3,200 mm • Maximum turning diameter 3,200 mm • Maximum workpiece height 2,000 mm • Two CNC-controlled rams Isdpfx Ahsx Nhm Rjystb • Ram travel 1,250 mm • FAGOR 8070 CNC • Motor power 115 kW • Mechanical, hydraulic, electrical, and electronic retrofit new in 2007 • Chip conveyor • Complete enclosure • Cooling system • Work light • Air-conditioned electrical cabinet

Condition: good (used), Scope as per image. Infinitely variable speed up to 3,000 rpm. Itsdex Ngypepfx Ahyjb

Condition: used, HANWHA XP12 SWISS TYPE TURNING LATHE MAKE HANWHA-HANEX, MADE IN KOREA MODEL XP 12 YEAR 1996 CONTROL FANUC OT-C MAX MACHINING LENGTH 140.0 mm MAX HOLE DIA 6.0 mm SPINDLE HOLE DIA 14.0 mm Itedpfswidymsx Ahyeb SPINDLE RANGE 100 – 10,000 RPM SPINDLE MOTOR 1.5/2.2 kW TOOL NUMBERS 5+3 TOOLS RAPID FEEDRATE X AXIS: 15m/min Y AXIS: 15m/min Z AXIS: 15m/min MACHINE DIMS 1150 x 830 x 1540 mm MACHINE WEIGHT 900 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED TOOL HOLDERS COLLETS SET OF MANUALS COMPLETE

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Itjdpfoxxmf Ijx Ahyeb Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: used, TRAK / XYZ SLX 355 is a CNC turning lathe of high precision, engineered for superior accuracy and reliability. It features 2 axes, centre height 360 mm, distance between centres 1000 mm and centre height over slide 225 mm; spindle hole 52 mm; Z travel 1000 mm and X travel 190 mm. Rapid traverse Z 4 m/min, X 3 m/min; spindle speeds 50–1410 and 100–4000 rpm. Spindle nose D1-6 Camlock and Morse taper MK4. Delivers tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool applications. Itjdpoxx U Dxjfx Ahysb

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Drechselmeister Stratos FU 230 woodturning lathe with a center distance of 680 mm and a 2 HP motor. The showroom model is in its original condition, so you receive the full warranty. Iedpfjtppr Usx Ahyotb Technical Specifications - Center height: 230 mm - Swing diameter: 455 mm (up to 800 mm with optional outboard turning attachment!) - Center distance: approx. 680 mm (extendable!) - Spindle mount: M33 x 3.5 (hardened) with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 (Morse taper 2) - Speeds (2 belt settings): 60–1,350 rpm and 180–3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (230 V connection) - Weight: 178 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping by freight carrier: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning tool, wood turning, turning, machine Reference: R-A0117

Year of construction: 1961, condition: ready for operation (used), Faceplate diameter: 1255mm, with complete documentation, without accessories. The machine is slightly worn and shows signs of use, the side support is missing, one spindle nut is defective, the gears and bearings of the table have been recently overhauled, and the machine has been serviced internally and externally. Viewing on site is possible. Iodpfox Hhx Uox Ahyotb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, TECHNICAL DATA MACHINE SPECIFICATION WORKING RANGE • Max chuck diameter. 260 mm • Max swing diameter. 260 mm • Max machining diameter. 220 mm • Max part length. 110 mm • Travel X axis. 570 mm • Working stroke Z axis. 250 mm • Travel Z axis. 200 mm CLOSED STANDARD AUTOMATION • Number of carrier frames for workpiece diameter 80 to 220 mm. 14 pieces • Number of carrier frames for workpiece diameter 30 to 160 mm. 18 pieces • Number of carrier frames for workpiece diameter 30 to 85 mm. 30 pieces • Max total load. 120 kg PICK UP SWITCH POINTS • Pressed. 1 mm • Over pressed. emergency stop. 5 mm • Pickup spring travel max. 30 mm CHAIN SYSTEM • Chain length. 182 inches • Chain pitch. 1 inch (25.4 mm) • Chain tension at 20 carrier frames. 400 N • Chain wheel. Z equals 30 • Gear ratio. i equals 100 • Motor revolution per belt revolution. 540 LOADING TIME • Loading time. 2 to 4 seconds MAIN SPINDLE • Spindle flange according to DIN 55026. Size 6 • Spindle bearing front diameter. 110 mm • Max spindle speed. 4500 rpm (5500 optional) MAIN DRIVE. AC ASYNCHRONOUS MOTOR. TYPE 1MB241H • Power at 100 percent duty cycle. 18 kW • Power at 40 percent duty cycle. 27 kW • Torque at 100 percent duty cycle. 202 Nm • Torque at 40 percent duty cycle. 303 Nm • Corner speed. 850 rpm FEED DRIVE • Rapid feed speed X axis. 60 m per minute • Rapid feed speed Z axis. 30 m per minute • Feed force X and Z. 5.5 kN • Ball screw diameter X and Z. 40 mm • Acceleration. 5 m per second squared TOOL CARRIER • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max tool length including holder. 190 mm • Max swing diameter. 740 mm Itodpsx Elf Ajfx Ahyeb TOOL CARRIER WITH DRIVEN TOOLS • Cylindrical tool shank mount according to DIN 69880. twelve positions • Shank diameter. 40 mm • Max speed. 6000 rpm • Corner speed. 3000 rpm • Max torque at 10 percent duty cycle. 45 Nm • Max torque at 40 percent duty cycle. 30 Nm • Max torque at 100 percent duty cycle. 15 Nm ELECTRICAL EQUIPMENT • Operating voltage. 400 to 480 V • Control voltage DC. 24 V • Control voltage AC. 230 V • Frequency. 50 or 60 Hz • Connected load. 42 kW • Supply fuse rating. 63 A • Electrical design standard. VDE 0113 DIMENSIONS AND WEIGHT • Length. 2680 mm • Length including chip conveyor. 3820 mm • Width. 2040 mm • Height. 2400 mm • Machine weight. approx 6500 kg NOISE EMISSION • According to DIN 45635. • Measured sound pressure level. 78 dB(A) during continuous cutting on a cylindrical test part.

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories Isdpsx Ed A Dofx Ahyotb 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad Itodsw Ed Tfspfx Ahyob number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachment: all comes with. It is the only one in the production.

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm Iedpfx Ahsqwlmqjystb above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm Iodswz Rifopfx Ahystb - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2010, functionality: unexamined, feed length X-axis: 250 mm, feed length Z-axis: 500 mm, power: 40 kW (54.38 HP), spindle diameter: 300 mm, EMAG VSC 7 ( YEAR OF MANUFACTURING - 2010 ) - 01 NO & EMAG VL 05 ( YEAR OF MANUFACTURING - 2012 ) - 01 NO Iedpfxjx Rawdo Ahyotb

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Iedpfx Ahswxl Rloyjtb Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed

Condition: excellent (used), Year of construction: 2018, operating hours: 3,590 h, functionality: fully functional, spindle motor power: 15,000 W, turning length: 100 mm, turning diameter over cross slide: 51 mm, spindle speed (max.): 5,000 rpm, turning diameter: 51 mm, spindle bore: 51 mm, overall weight: 5,300 kg, rotational speed (max.): 5,000 rpm, type of input current: three-phase, bar passage: 51 mm, feed length X-axis: 165 mm, feed length Y-axis: 80 mm, feed length Z-axis: 590 mm, total width: 1,560 mm, total length: 2,840 mm, total height: 1,700 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 20 m/min, bar diameter (max.): 51 mm, turning diameter over bed slide: 51 mm, turning diameter over top slide: 51 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 590 mm, power of the servo motor: 15,000 W, Equipment: documentation/manual, rotational speed infinitely variable, 2018 Citizen Miyano BNJ-51 CNC Automatic Lathe – Excellent Condition & Low Hours 2018 Citizen Miyano BNJ-51 Fixed Headstock CNC Automatic Lathe, complete with Iemca Kid 80 Barfeed and full tooling package. This high-precision twin-spindle lathe has only 3,590 cutting hours and comes from a clean, well-maintained production environment. Perfect for precision component manufacturing in medical, aerospace, and automotive industries. Machine Overview Make/Model: Citizen Miyano BNJ-51 Machine Type: Fixed Headstock Type CNC Automatic Lathe Year: 2018 Control System: Fanuc Series Oi-TF Cutting Hours: 3,590 hrs Condition: Excellent – low hours, production-ready Included Equipment & Features Iemca Kid 80 Barfeed Parts Conveyor Swarf Conveyor Parts Catcher Mirror Turning Capability Collet Chuck on Spindle 1 Collet Chuck on Spindle 2 6” 3-Jaw Hydraulic Chuck 8 x Driven Toolholders Full Set of Static Toolholders Technical Specifications Machining Capacities Max. Machining Length: 100 mm Standard Turning Diameter (Spindle 1): 51 mm Standard Turning Diameter (Spindle 2): 42 mm Chuck Size Spindle 1: 6" Chuck Size Spindle 2: 5" Number of Spindles: 2 Spindle Performance Spindle 1 Speed Range: 5,000 rpm Spindle 2 Speed Range: 5,000 rpm Draw Tube ID (Spindle 1): 52 mm Draw Tube ID (Spindle 2): 43 mm Spindle 1 Drive Motor: 15 kW Spindle 2 Drive Motor: 7.5 kW Turrets & Tooling Number of Turrets: 2 Turret 1: 12-Station (Driven Tool Capable) Turret 2: 8-Station (Driven Tool Capable) Square Tool Shank: 20 mm Drill Shank Diameter: 25 mm Iedextfqropfx Ahyetb Driven Tool Speed – Turret 1: 6,000 rpm Driven Tool Speed – Turret 2: 3,000 rpm Driven Tool Motor (T1): 2.2 kW Driven Tool Motor (T2): 0.75 kW Axis Travels X1 Travel: 165 mm Z1 Travel: 246 mm Y1 Travel: 80 mm (+/- 40 mm) X2 Travel: 85 mm Z2 Travel: 590 mm Rapid Feeds (X1, Z1, X2, Z2): 20 m/min Rapid Feeds (Y1): 12 m/min Power & Electrical Power Capacity: 33 kVA Machine Dimensions (W x D x H): 2840 x 1560 x 1700 mm Machine Weight: 5,300 kg Highlights Low Cutting Hours: Only 3,590 hrs of light use Full Barfeed & Chip Handling Package – ready for continuous production Twin Spindle / Twin Turret Configuration for maximum productivity Driven Tooling for milling, drilling, and complex part geometry Fanuc Oi-TF Control – industry standard reliability and precision Ideal for precision turned parts in small to medium batch runs Applications This machine is ideal for medical components, automotive fittings, aerospace connectors, hydraulic parts, and general precision turned parts. The combination of twin turrets, high-speed spindles, and driven tooling allows for efficient multi-axis machining with minimal setup time and high repeat accuracy. Condition & Availability The Citizen Miyano BNJ-51 is in excellent mechanical and cosmetic condition and available for immediate inspection or delivery. Citizen Miyano BNJ-51, Used Citizen CNC Lathe, Used Miyano Lathe Ireland, CNC Automatic Lathe for Sale, Citizen BNJ Lathe, Twin Spindle CNC Turning Center, Used CNC Machines Ireland, Fanuc CNC Lathe, Barfeed CNC Lathe, Used Precision Lathes, Citizen Miyano BNJ Series, CNC Turning Machines for Sale Europe, Fixed Headstock CNC Lathe

Condition: used, Make: Schiess Control: Conventional Location: Germany Major overhauls: 2009 new electric with new AC main motor, 2022 overhaul of the gearbox. Ijdpfxsxpd Ems Ahyjtb Condition: under power, in good condition Chuck Ø: 9500 mm Swing Ø: 10500 mm Max. Workpiece Weight: 150 T Max. Working Height: 4500 mm Ram Vertical Travel: 2250 mm Chuck Speed: up to 7.35 rpm Machine Weight: aprox. 400 T Left ram is currently dismantled but will be supplied together with the machine.

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20 Itedpfovnwfzox Ahyob

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 Itjdpfx Aom E I D Hshysb spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 180 mm, turning diameter over cross slide: 212 mm, spindle bore: 52 mm, turning length: 1,000 mm, quill stroke: 152 mm, quill diameter: 52 mm, turning diameter: 360 mm, spindle nose: ASA D1-6, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, overall weight: 1,470 kg, Equipment: rotational speed infinitely variable, The SUN MASTER RML-1440V is a high-speed precision universal engine lathe designed for accurate turning, threading and general metalworking. It features a rigid cast-iron bed, hardened and ground ways, a powerful variable-speed spindle with two-range gear head (20–400 / 400–2500 RPM), and a D1-6 spindle nose. The lathe includes a full quick-change gearbox, power feeds for both carriage and cross-slide, a 4-way tool post, tailstock with MT4 quill, foot brake, constant-surface-speed (CSS) function, coolant system and an integrated lubrication system. The RML-1440V provides stable performance, precise control, and versatility for both production and workshop applications. The lathe is locate in our warehouse and ready for shipment and any time. Iedpfxsxyh Nqo Ahyetb

Condition: good (used), Vertical Turning Lathe SC33 CNC Manufacturer: TITAN (Romania) YOM: 1986 Complete revision of the machine in 2005 Itedpfx Ahjw Eplaoysb Main technical data: CNC Siemens 802D Faceplate diameter: 3000mm Max. turning diameter: 3300mm Max. working height: 3000mm Max. workpiece weight: 18000kg Table speed range: 1.02-92 RPM Working feed range: 0.05-5 mm/rev. Main motor power: 55 kW Overall dimensions: 5600 x 5300 x 5400 mm Weight: 47350 kg The machine is under power.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CLASSROOM MACHINE For sale is a Drechselmeister Twister FU 200 wood lathe with a distance between centers of 715 mm. The machine is in very good condition. Technical Specifications - Center height: 200 mm - Swing over bed: 395 mm (700 mm with optional outboard turning attachment) - Distance between centers: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drilling quill - Motor: 2 HP (connection 230 V) - 2-stage emergency stop switch - Weight, stand version: 166 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping by freight: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: wood lathe, lathe, turning machine, woodworking lathe, woodturning, turning tools, woodturning, machine Reference: R-A0117 Itodpfxswudkij Ahyeb