Used Turning Lathe for sale (9,585)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Year of manufacture 2018 Control: Fanuc Ijdoy I Dq Ajpfx Akxsba TCM Further data to follow...

Condition: ready for operation (used), Year of construction: 2008, Maier ML 125 Linear – Technical Specifications ML 125 Linear Year of Manufacture: 2008 Control System: Fanuc 16iTB Number of Axes: 7 Axis Acceleration: 2 g Through-hole: Main spindle 12 mm, counter spindle 20 mm C-axis: Iedjzggy Uspfx Akxsba Spindle Bore: 160 mm Spindle Speed: 0 – 10,000 rpm Electronic Indexing: 0.001 degrees Bar Feeder

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Ibodpfxjzfiipe Akxea Total weight: 3,600 kg Operating hours (as of May 6, 2026) Operating hours: 9,243 h Machining time: 5,991 h EQUIPMENT Fully programmable B-axis Total of 9 axes Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Iodpfxeib D H Rs Akxoba Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm Ibedpfx Asw Uf Hwokxsa - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, Oma lathe 1200 mm Genini 1200 mm lathe grinder Conveyor belts for unloading lathes and loading automatic grinders Ijdpfx Ajzfyzvekxsba

Condition: excellent (used), Year of construction: 2015, workpiece weight (max.): 20,000 kg, spindle motor power: 90,000 W, spindle speed (max.): 75 rpm, turning diameter: 4,000 mm, turning height: 1,900 mm, New 2015. Purchased 2022 for a project was cancelled before commissioning was completed and the machine has not been used in any production after Ibjdpfjy Uxdkjx Akxoa commissioning. Very full documentation is available upon request Main specification details. Turning diameter 3600mm. Maximum turning height 1900mm. Maximum table load 20,000kgs. Table speeds are infinitely variable between 14rpm and 75rpm. Table drive motor 90KW AC. Table torque to 61168NM. Z axis thrust 36000NM. X and Z axes traverse rates 1-5000mm/min. Ram is 320mm diameter Price, ex works UK Midlands £330,000 VTT-WB can quote transport installation and commissioning

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, feed length Z-axis: 1,000 mm, workpiece weight (max.): 15,000 kg, spindle motor power: 37,500 W, spindle speed (max.): 415 rpm, turning diameter: 2,100 mm, turning height: 1,300 mm, workpiece diameter (max.): 2,100 mm, year of last overhaul: 2026, As with all Millenniums this machine has the wonderful base structure and table drive design that makes all the production wishes possible – the highest accuracy and the highest chip removal When this machine is delivered to the customer it will have been fully serviced and refurbished to ensure those qualities are ready for you to use turning, pcd drilling, rotary contour milling, angle drilling, grinding – see it all on the Millennium films on the website Isdpfxey Uw Sge Akxeba Only the best machine tools are designed and built with this quality and strength

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB Ibjdpfsy Uw Emjx Akxja New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery Ijdpfoy Uwxtex Akxoba 12 months guarantee

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. Ibedpfey Uwg Rjx Akxsa 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg Ibjdpfx Aozdqdfskxja EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Ibjdpjytn Emjfx Akxea Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 2,800 kg, type of input current: three-phase, input voltage: 200 V, Equipment: bar feeder, documentation/manual, We offer this like-new CITIZEN BNA-42S2 automatic lathe, manufactured in 2023, complete with a feeder. Ibedozdd Dmopfx Akxea Model: BNA-42S2 Factory number: BNAS2P/3151 Serial number: DJ0667 Date of manufacture: 2023.01 Rated current at full load: 81 A Rated power: 28 kVA Short-circuit interrupting current: 2.5 kA Weight: 2800 kg Supply voltage: AC 200 V, 3 phases, 50/60 Hz If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 340 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 215 mm, spindle motor power: 30 W, turning diameter: 200 mm, turning height: 200 mm, rotational speed (min.): 4,000 rpm, Manufacturer: FAMAR Model: ERGO 250 Category: Vertical CNC Lathe Year: 2004 CNC Control: Siemens 840D Isdezdu Dpjpfx Akxoba Specifications Maximum turning diameter: Ø 350 mm Maximum machining diameter: Ø 200 mm Maximum machining height: 200 mm Spindle Integrated electric spindle Chuck: Ø 250 mm Spindle nose: ASA A2-6 Spindle speed: 6,000 rpm Spindle power: 30 kW Axes X-axis: 340 mm (820 mm total) Y-axis: 120 mm (±60 mm) Z-axis: 215 mm C-axis: 360° with 0.001° resolution Heidenhain optical scales on the axes Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 20,000 mm/min Z-axis: 30,000 mm/min Turret 12 positions Powered tools Powered tool speed: 4,000 rpm Powered tool power: 8 kW Turning tools: 25x25 mm Boring bar: Ø 40 mm Equipment Automatic loading/unloading system Pallet shuttle with workpiece pallets Chip conveyor Coolant tank with high-pressure pump Fixed and powered tool holders Manuals and electrical diagrams CE declaration General Data Installed power: 50 kW Machine weight: 10,000 kg Dimensions: 5,200 x 3,200 x 3,200 mm (L x W x H)

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 7,000 rpm, bar passage: 32 mm, feed length Z-axis: 320 mm, bar diameter (max.): 32 mm, power: 7 kW (9.52 HP), travel distance Z-axis: 320 mm, For sale: Hanwha STL32-HY CNC lathe (9-axis live tooling, max. diameter 32mm) Siemens 840D control cabinet Year 2011, machine was retrofitted in 2018 Ijdpoytfynefx Akxeba Chip conveyor Numerous accessories/tooling included with the machine Available immediately HANWHA/CINCOM/TORNOS/NOMURA/STAR/BIGLIA/TSUGAMI/SWISS-TYPE LATHE/KMX

Condition: good (used), Year of construction: 2011, Control Fanuc OI-TD, bar capacity 20mm, maximum cutting diameter 20mm, maximum cutting length 183mm, maximum drilling diameter 10mm, maximum tapping capacity M8, milling speed 6,000rpm, spindle speed 10,000rpm, C axis 0.001 degree, FMB barfeed, number of controlled axis X Y Z XB ZB. Iedpfx Aoyw R Erjkxoba

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, maximum workpiece length 280mm, Bar capacity 38mm, Iedpewb A Hcjfx Akxsba X axis stroke 480mm, Z axis stroke 285mm, spindle speed 6,000 rpm, power 5.5Kw, swarf conveyor.

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas M70 Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + FMB m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. Ibsdpfsy Hl Hijx Akxja ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, CNC sliding headstock automatic lathe Make: STAR Model: SR-20 Year: 1998 with: FANUC 16-T control Ibedpfx Aoy Hg Hdekxoa Back side machining Synchronised spindle Driven tools C-axis Bar feeder magazine FMB TURBO 3-26

Condition: excellent (used), We invite you to contact us for further information and to arrange a product presentation appointment Ibedpownxhpefx Akxoa

Condition: good (used), Year of construction: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Note: The system will likely require some reprogramming, as it was previously integrated into a complete processing line. However, a stand-alone program is available. Transportation and loading can be organized Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Machinery Purchase / Sales Iedpey H Iglsfx Akxoba PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your machine? For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z axis (vertical): 265 mm X axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1000 - 7000 rpm Traverse speed Z axis: max. 30 m/min Traverse speed X axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will likely need some reprogramming as it was part of a complete production line. However, an individual program is available. On request, transport and loading can be organized throughout Europe for an additional charge. Prices are subject to VAT. Iedpfoy H Ifusx Akxsba Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For more information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar Ibodpfx Aozaud Aekxea High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: used, Year of construction: 2017, operating hours: 21,752 h, functionality: fully functional, turning length: 100 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 3,000 kg, Max. work length: 100 mm Max. machining diameter of bar work SP1: 42 mm Max. machining diameter of bar work SP2: 34 mm Turret slide stroke X1 axis: 140 mm Z1 axis: 235 mm Ibsdpfxox Ig Iko Akxja Z2 axis: 310 mm Number of spindles: 2 Spindle speed range SP1: 60-6,000 rpm Spindle speed range SP2: 50-5,000 rpm Tool spindle speed range: 50-5,000 rpm Number of driven tools: max. 8 Spindle drive SP1: 11/7.5 kW Spindle drive SP2: 5.5/3.7 kW Power supply capacity: 28 kVA Fuse: 81A Bar feeder: SN542-3.2 m Quick tech Year of manufacture: 2017 Serial no.: 1438