Used Twin 65 for sale (9,723)

Year of construction: 1989, condition: good (used), Werner ZSK 58/32 D twin-screw extruder Year: 1989 Isdpszktrrefx Acqjba 110 kW motor

Condition: good (used), machine/vehicle number: 3679, total length: 4,030 mm, total width: 3,410 mm, Year of construction: 2022, operation weight: 3,600 kg, load capacity: 41,000 kg, Seacom UT41 TWIN from Uniktruck Iodpfxozqvk De Acqoba

Condition: used, maximum load weight: 28,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 07/2026, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,665 mm, Year of construction: 2022, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: Reisch 65 cbm Sliding Floor Trailer (Vehicle 607) First Registration: 07/05/2022 Type: RSBS-3-10/C3V Permissible Gross Vehicle Weight: 35,000 kg Unladen Weight: 6,680 kg Payload: 28,320 kg Overall Length: 11,000 mm Overall Width: 2,550 mm Overall Height: 3,665 mm Load Volume: approx. 65 cbm MOT (TÜV): 07/2026, Inspection (SP): 01/2027 Roll-over tarpaulin, platform Clean floor, end pieces, sides, reinforced walls at the rear Portal doors 1/2 and 1/2 at the rear with grain slide Remote control Cargo Floor LED work lights + reversing lights 2 x 12-ton, 2-speed geared winch Storage box, plastic, passenger side, rear Ibodpszq Tm Nefx Acqsa Air suspension with lifting and lowering function 1st lift SAF disc Tires 385/65R22.5, 1st tire approx. 70/60%, 2nd tire approx. 60/50%, 3rd tire approx. 60/80% Half-shell fenders Access ladder Price: €30,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court (Amtsgericht) of Ludwigslust; for disputes exceeding this value, it is the regional court (Landgericht) of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, axle configuration: > 3 axles, first registration: 07/1994, loading space length: 13,550 mm, loading space width: 2,550 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: hydraulics, tire size: 275/70R22,5, color: other, Year of construction: 1994, Number of axles: 4, dual tires, unladen weight: 14,000 kg, gross vehicle weight: 65,000 kg, chassis type: complete chassis, kingpin size: 2 inch, suspension type: air suspension, body construction year: 1994, extendable chassis: front, extendable length: 7, axle type: BPW Ibjdpezkf N Aefx Acqsa = Further information = General information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 275/70R22.5 Brakes: Drum brakes Suspension: hydraulic suspension Axle 1: Dual tires; tire tread depth left inside: 8 mm; tire tread depth left outside: 11 mm; tire tread depth right inside: 13 mm; tire tread depth right outside: 13 mm Axle 2: Dual tires; steered; tire tread depth left inside: 13 mm; tire tread depth left outside: 14 mm; tire tread depth right inside: 14 mm; tire tread depth right outside: 13 mm Axle 3: Dual tires; steered; tire tread depth left inside: 8 mm; tire tread depth left outside: 8 mm; tire tread depth right inside: 14 mm; tire tread depth right outside: 14 mm Axle 4: Dual tires; steered; tire tread depth left inside: 13 mm; tire tread depth left outside: 13 mm; tire tread depth right inside: 14 mm; tire tread depth right outside: 14 mm Weights Unladen weight: 14,000 kg Payload: 51,000 kg GVW: 65,000 kg Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), Year of construction: 2014, operating hours: 5,770 h, fuel type: diesel, Genie S-65 telescopic boom lift, 4x4, DEUTZ diesel engine, 5770 hours, 21.8m working height, 2014. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on-site. Ibedozqhnbepfx Acqoa Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Single-screw extruder - Screw diameter: 65 mm - Refurbished - Degassing zones - Filter/screen changer - Die installed Data sheet, see photos. Optionally available with water bath & strand granulator, etc. Isdpfxshgq Aho Acqsba If you have any further questions, please do not hesitate to contact us. Commissioning and testing can be arranged. Available for immediate delivery.

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter Ibedpfx Aou Hik Decqsa - 4x heating zones - dosing - Control system

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin-screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly maintained. Technical details: • Model: ZSK 83 • Screw system: Co-rotating twin-screw • Motor power: 46 kW • Barrel: Water-cooled • Degassing zone: available • Dosing unit: included (as seen in the photos) • Spare screw elements: available • Control system / control cabinet: in good condition, fully functional General information: This line is ideally suited for compounding, masterbatch, recycling, polymer, and filler applications. The extruder has been overhauled as needed and technically inspected. Inspection and test run on site possible by arrangement. Worldwide transport possible. Isdpfx Acex Dkmgeqjba If interested, please get in touch—further photos, datasheets, and videos are available.

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. Ijdoy A H Umjpfx Acqjba The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: Iodpfxsyfm Eps Acqsba • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: like new (used), functionality: fully functional, Used Brabender twin-screw feeder type DDW-H21-M-DDS20-50R • Year of manufacture: 1993 • Throughput range: 5 – 50 kg/h • Integrated agitator / paddle system in the hopper (as shown in the photos) • Stainless steel hopper Ibsdpfxjyfm Spo Acqsa • Twin-screw design The feeder is in good condition, complete, and ready for immediate use. Ideal for powders, granulates, and poorly flowing bulk materials.

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: Ijdpfx Acsycuuyeqsba • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 2025, condition: new, New OS-60-NX Nitrogen PSA Generator with the delivery for 65.0 Nm³/h at 7 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 3.7 m³/min Pressure 9 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Iodpfx Aevyq S Sscqsba Specification of Nitrogen Obtained: Volume: 65.0 Nm³/h Nitrogen pressure: 7 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-60-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2026, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Time of delivery 8 to 10 weeks Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Ibjdpfswa I Ebjx Acqja Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2018, condition: new, machine/vehicle number: ALM65, ALMIG Dryer ALM 65 Air flow: 60 m³/h Air flow: 1,00 m³/min Ibjdpfsdcbggex Acqoa absorbed power: 0,34 kW Air Connections: BSPP-F 3/4" Pressure Dew Point (°C): + 3 ambient Temperature: 4 to 43 ° C compressed air inlet Temperature max: 49 ° C Weight: 29 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 RG2 Year of manufacture: 2004 Iodpfx Aezl Dvkecqjba Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % ED) Main spindle torque: 180 / 140 Nm Tailstock: Yes, same power X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connection power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor Bürener type SPE 63/30-250 Z60 Tool monitoring system from Artis, type CTM Tailstock mounted on the counter-spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center: MK3 Overload coupling for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece removal device Workpieces can be automatically unloaded from both the main and counter-spindle Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine from IRCO, type SiMag 42

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 145 mm, Feature | Gildemeister Twin 42 RG2 Control system | Siemens 840D Powerline Turning diameter | 145 mm Max. bar diameter | 45 mm Spindle head | Flat flange 120 h5 Chuck | 130 / 140 mm Main spindle speed | 20–7,000 min⁻¹ Ibsdszl Drxjpfx Acqja Main spindle power | 28 / 22 kW (40/100 % ED) Main spindle torque | 180 / 140 Nm Counter spindle | Yes, same power X-axis | 220 mm Z-axis | 320 mm Y-axis | ±30 mm Rapid traverse X/Y/Z | 30 / 15 / 30 m/min Turret | 2 × 12 stations Tool holder | VDI 25 Machine weight | approx. 5,300 kg Connected load | approx. 40 kVA Design | 60° inclined bed, linear guides Chip conveyor Bürener Type SPE 63/30-250 Z60 Tool monitoring system by Artis, Type CTM Tailstock mounted on the counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Bar machining package consisting of: Part removal device Workpieces can be automatically unloaded from both the main and counter spindle Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change toolholders, size 42, Hainbuch Spanntop Connection for bar feed Bar loader magazine by IRCO, Type SiMag 42

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Iedeu Rc Hyepfx Acqsba Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: used, first registration: 11/2007, Year of construction: 2007, GERGEN JUNG 2 - axle trailer for skip containers / containers, twin tires, air suspension • ABS • 2 x air-suspended 9-ton Mercedes axles • Disc brakes • Twin tires • Lift/lowering system • Axle load: 2 x 9,000 kg • Gross vehicle weight: 18,000 kg • Curb weight: 3,400 kg • Payload: 14,600 kg • Tyres: 265 / 70 R 19.5 • Tyre tread: 80 % • Total trailer length: 7,500 mm - Ready for operation! - General inspection / TÜV safety inspection: new! Errors and prior sale reserved! = Further information = Iodeyutx Uepfx Acqjba GVW: 1 kg Please contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 242724, Automatic miter cutting Overlength cutting Saw blades 500mm etc. Ibodszqu Egspfx Acqea

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x EME Series 2000 inline wrap-around labelling machine with ICE Zodiac ES thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. Manufacturer - EME. Iedpfsy Hkqyox Acqoba Serial Number - 15066. Date of manufacture - 2015. Labelling heads - 2 x EME Series 4000. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (can go higher).

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 257.42 kW (349.99 HP), Mobile shredder LINDNER MIURA 1500. Foldable discharge conveyor. Ijdpfx Aceu Di Azeqeba Radio remote control.

Condition: new, functionality: fully functional, power: 435 kW (591.43 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 6,471 kg, operation weight: 6,471 kg, tire size: 7.50x15 dubbele banden, tire condition: 100 %, drive condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.2 m³, Year of construction: 2025, operating hours: 48 h, Equipment: additional headlights, adjustable boom, air conditioning, all wheel drive, gripper hydraulics, hydraulics, low noise, onboard computer, soot filter, === KEY SPECIFICATIONS === Year: 2025 Hours: 48 h Operating weight: 6,471 kg Maximum digging depth: 3,795 mm Maximum digging reach: 6,445 mm Bucket capacity: 0.20 m³ Engine: Perkins 404F-E22TA Engine power: 43.5 kW Maximum travel speed: 30 km/h Tyres: Michelin XMCL 12.5/80-18 pneumatic tyres CE certification: Yes === EQUIPMENT & FEATURES === Triple boom Dozer blade Four auxiliary hydraulic circuits Auxiliary hydraulic flow: 144 l/min Overload valve for auxiliary hydraulics PowerTilt pilot circuit Isdpozp Dvljfx Acqjba Easy Lock preparation Automatic climate control Enclosed heated cabin Electrical refuelling pump Road homologation kit Radio Flashing beacon Air-suspended seat Front and rear working lights Dual tyres: 7.50x15 === CONDITION === New and unused machine with only 48 operating hours. The machine is in new condition, with 100% remaining tyre tread. Inspection and operational testing are possible by appointment. === DESCRIPTION === New 2025 Wacker Neuson EW 65 wheeled excavator with only 48 operating hours. Equipped with a Perkins Stage V diesel engine, triple boom, four auxiliary hydraulic circuits, automatic climate control and Easy Lock preparation. Its compact dimensions and maximum travel speed of 30 km/h make it suitable for construction, infrastructure and urban excavation work. === PRICE, LOCATION & DELIVERY === Price: On request Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: used, functionality: fully functional, Year of construction: 2020, power: 36 kW (48.95 HP), load capacity: 454 kg, empty load weight: 11,430 kg, construction height: 2,820 mm, fuel type: diesel, total length: 9,700 mm, drive type: Diesel, arm reach: 16,510 mm, construction width: 2,490 mm, working height: 21,810 mm, Telescopic Work Platform Technical condition: New Front tyre type: Pneumatic Front tyre size: 355/55D 625 foam-filled Rear tyre type: Pneumatic Rear tyre size: 355/55D 625 foam-filled Ibodpfx Ajzrcn Eecqoa

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,245 h, power: 36 kW (48.95 HP), load capacity: 454 kg, empty load weight: 11,430 kg, construction height: 2,820 mm, fuel type: diesel, total length: 9,700 mm, drive type: Diesel, arm reach: 16,510 mm, construction width: 2,490 mm, working height: 21,810 mm, Telescopic work platform Ijdpfxjzrcdys Acqeba Condition: Ready for use and fully functional Technical condition: good Front tire type: pneumatic Rear tire type: pneumatic