Used Two Colors for sale (12,592)

Condition: like new (used), functionality: fully functional, These loading ramps have only been used once. Gijdsyk Dyzepfx Akysu Load capacity per ramp for two-axle vehicles with axle load distribution 40% to 60% with axle spacing 1.50 m 5,655 daN (kg) with axle spacing 2.00 m 6,505 daN (kg) Single-axle vehicle 3,830 daN (kg) Max. permissible gradient 30% (16.5°)

Condition: like new (used), functionality: fully functional, This series of machines selects products using a high-precision electronic system that sorts tomatoes according to the desired color shade and, depending on application, allows the rejection of products of undesired color or possible foreign bodies from the product flow. Sorting characteristics: Sorting efficiency: 96% Vision system: Optical sensors Optical resolution: 25 mm Illumination: LED visible/infrared Degree of protection: IP65 Ejection system: Mechanical / pneumatic with lubricated air Gjdpfjynkdnsx Akyoiu Working pressure: 5 ÷ 6 bar Conveyor system: Belt conveyor Cleaning system: Water with automatic pneumatic movement of the brush (timed operation). Electromechanical characteristics: Operating voltage: 400 - 480 V (3-phase + neutral), 50 - 60 Hz Power consumption: 1 kW Control voltage: 24 V DC Pneumatic connection: 7+8 bar, Consumption: 10 l/min, Temperature: 50ºC Hydraulic connection: 2+3 bar, Consumption: 0.3 l/min, Temperature: 25ºC.

Condition: good (used), Two-hand control consoles, various versions, some equipped with emergency stop button, green or grey, some with stand, as shown in the photos. Price refers to green console without button. Gedpfx Akjxwm Erjysiu

Condition: ready for operation (used), Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible. Giedpfx Aeylzhrekyju

Condition: used, Year of construction: 2016, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 6085020721, control cabinet width: 300 mm, control cabinet length: 900 mm, control cabinet height: 900 mm, blade width: 20 mm, year of last overhaul: 2025, torque: 8,600 Nm, overall weight: 2,500 kg, We offer this used Eric Schomberg ES60/85 rotary shear, twin-shaft rotary shear, year of manufacture 2016. Manufacturer: Eric Schomberg Gedpfx Akoyiuh Heyeiu Model: ES60/85 Year of manufacture: 2016 Condition: used Machine type: rotary shear, twin-shaft rotary shear If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, product width (max.): 1,700 mm, working width: 1,700 mm, product height (max.): 14 mm, roll diameter: 291 mm, total height: 1,400 mm, total length: 4,600 mm, total width: 2,000 mm, warranty duration: 12 months, Equipment: documentation/manual, Flexo Printer is a machine for printing on processed and unprocessed plates. It has possibility of printing on any type of corrugated cardboard. Furthermore, the machine is available in configurations with one or two colors. Cliché thickness is not fixed and it is possible to use any standard or bespoke cliché thickness. High quality print is achieved through fine tuning of the rollers that apply ink to the clichés. Machine is available in two working widths of 1200mm and 1700mm, the smaller one having print width of 1000mm and the bigger one outputting prints that are 1400mm wide. Technical characteristics: Working width: 1700mm // Other possibility 1200mm Gedpfx Ajd Iqugekyeiu Print width: 1400mm // Other possibility 1000mm Capacity: up to 36pcs/min Print height: ≈ 950mm Ø cliché roller: 292mm

Condition: new, Year of construction: 2026, overall weight: 4,300 kg, working range: 1,200 mm, power: 44 kW (59.82 HP), RS TeamTech Sp. z o. o. We are a Polish manufacturer of personalized recycling machines - we select machine parameters individually for each client. The presented shredder is: RS1200F Working chamber: 1200x600 mm POWER: 2x 22kW (Seweurodrive) The shredder has an advanced machine control box and a set of belt conveyors. The system monitors the load of the shredder motors, has a reverse and stop function in the event of overload connected to the belt conveyor system. Gisdjr Dffmjpfx Akyou Contact us RS TeamTech Team

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! Giodpfx Aoq R N Tqjkyeu also available as Craneset

Condition: excellent (used), functionality: fully functional, 230 V. Including IT workstation (consisting of: 1 computer, 1 monitor, keyboard and mouse), speed 3.4 sqm/h. Printing dimensions: 610 x 1000 x 4 mm. Giedpfswvid Rsx Akyou

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Giedeyddy Ijpfx Akyju

Condition: used, Max. output: 108.8 ml/stroke, speed: 5-6 stroke/min, capacity: 2x 20l, with documentation, machine was hardly used. Giedjw D Dc Dopfx Akysu

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Gisdpfxoxx Uf As Akyeu

Condition: ready for operation (used), Year of construction: 2021, A Meyer color sorting system for the optical separation of small grain sizes in the food industry is available. Chutes: 10, cameras: 20, camera type: RGB 5400 CCD, compressor power: 37kW, compressor delivery rate: 7.1m³/min. Including integrated stainless steel container, refrigerant dryer and screw compressor. The conveying elements were integrated used and may need to be renewed if required. Documentation available. An on-site inspection is possible. Gijdexxa S Uspfx Akyou

Condition: ready for operation (used), Year of construction: 2014, A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible. Gsdpfx Ajxxl Nlekyoiu

Year of construction: 2016, condition: ready for operation (used), Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement. Gsdpfxexx Ufvj Akyjiu

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Giodpfxoxyk Sne Akyju

Condition: new, Year of construction: 2025, Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm; label width: 10-150mm; bottle diameter: customized; label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ± 1mm; max. speed of the machine in neutral: 150 cycles/minute; power: 220V/380V, 50Hz/60Hz, 750W; machine dimensions: L2400mm×W1500mm×H1400mm; weight: 400kg. Gjdpfx Asv Nk Sqokysiu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. Gjdpfex Syghex Akyoiu It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: A230159, For sale: Refurbished shaft set for Arjes Impaktor. The shaft set has been completely overhauled and inspected for cracks. It is in good technical condition and ready for immediate use. Giodpfx Akox Td Npeyou All tools are new and made from HB500. The shaft set is ready for installation and can be supplied with either EVO 1 or EVO 2 cassette, as required. We accept your old shafts in part exchange. Price and further details upon request. Cost-effective shipping available throughout Europe. Tecweld GmbH is a company specializing in the refurbishment of wear parts. Our focus is on the repair and reconditioning of crusher and shredder shafts. This is precisely where our core competence lies. Thanks to our many years of experience and expertise, we are able to offer cost-effective solutions. In many cases, professional refurbishment is significantly more economical than purchasing new parts or carrying out time-consuming repairs in-house. For our customers, this means reliable technology, predictable costs, and an economical alternative to replacing new components. Please feel free to contact us – we are happy to advise you.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, working width: 1,400 mm, FLEXO PRINTER SCHIAVI ARIES 6 COLORS Geared central drum flexo printer 6 colors Materials that can be printed plastic films and paper Max. printing width 1400 mm Print repeat min/max 320/1080 mm Automatic turret rewinder Drying unit by gas Equipped with sleeves and aniloxes Gjdpfxeyrnmuo Akyoiu Year 1995

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Gjdpfslyr Adex Akyjiu

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Gedpfslmmwrsx Akysiu

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Gijdpfx Aeq A Un Sokysu

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Stationary, fully electric, Twin Shaft Shredder Year: 2025 Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Giodpot Urq Ujfx Akyju Rotation speed (rpm) 11–35 Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm))

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, overall weight: 950 kg, warranty duration: 12 months, power: 7.5 kW (10.20 HP), input current: 32 A, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Mercodor shredder ZM 44 complete machine with safety devices and switches. Siemens PLC control with overload protection etc. Machine with a cutting area of 500x380 mm knife 14 mm 3 hooks drive 7.5 KW. Giodpfx Akjiv Sr Noyeu