Used Universal Boring Machine for sale (92,258)

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 Hjdsxndahopfx Aaqew stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Condition: good (used), Year of construction: 2009, In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation x-travel 4000 mm y-travel 1350 mm z-travel (Vertical) 1600 mm table surface area 4200 x 1150 mm table load 13 to tool taperISO 50 spindle turning speed - stepless 0 - 3000 rpm Gear steps 2 spindle motor 28/38 kW feed range 5000 mm/min Hedpfx Aajw Hfm Aeqsw rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine approx. 37 to dimensions of the machine approx. 12,9 x 6,53 x 3,79 m

Year of construction: 2011, condition: ready for operation (used), X-axis: 1150mm, y-axis: 710mm, z-axis: 710mm, number of tool positions: 32, rapid traverse/feed rate: 30m/min, working area height: 2578mm, tool holder: SK40, accuracy: 10μm, speed: 18,000/min, drive power 40% ED: 28kW, control: Heidenhain iTNC 530, power connection: 80A, connected load: 48kVA, length: 4228mm (including rear wall and chip conveyor), width: 3458mm, total height: 3256mm, chip conveyor height: 965mm, weight: 10.5t, operating hours: 30,521h, spindle hours: 15,386h. With Zeroclamp 12 pots 138 (zero-point clamping system). An on-site inspection is possible. Hjdpfxsxtpqve Aaqow

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Hedspqx H Tjpfx Aaqsw Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: used, Year of construction: 2013, travel -x axis 4.000 mm travel -y axis 1.250 mm travel -z axis 1.650 mm control HEIDENHAIN - iTNC 530 Hsdpfx Aouzadwsaqew number of spindle speeds 4.000 U/min tool taper SK50 Bed Type Milling Machine - Universal | KIHEUNG - U1250 A+B axis (fully automatic swiveling head): - speed: 4.000 min-1 The machine is in well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: U 1250 | U-1250

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN - Swivel head 90° right/left - Large rotary table 800 x1200mm - central lubrication - documentation Table size 800x1200mm Table load 1000kg longitudinal movement X- axis 1000mm transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 table feed longitudinal and transversal stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 220cm depth 220cm height 250cm Weight of the machine 3.300 kg Hedpfxopai Dho Aaqjw Tech. Data and dimensions: Errors excepted

Condition: used, Year of construction: 2009, x-travel 3.500 mm y-travel 1.200 mm z-travel 1.250 mm Control HEIDENHAIN TNC-530 table-size 1.250 x 1.250 mm table weight 4.000 Kg feeds 12.000 mm/min Number of revolutions 4.000 rpm power capacity 24 kW taper ISO 50 DIN 69871 AD spindle head Automatisch 2,5 x 2,5 Grad handwheel Heidenhain HR-410 internal coolant system feed 20 bar total power requirement 46 kW weight of the machine ca. 18.000 kg dimensions of the machine ca. 7.800 x 4.850 x 3.530 mm -Integralverkleidung -Doppelter Längsspäneabsauger -Querspanabsaugung Hedjvzhbtjpfx Aaqsw -500-l-Tank mit Magnetabscheider-Papierfilter

Condition: good (used), Year of construction: 2009, Working hours (dated April 2025): - Machine on: 34.320 h - Control on: 23.218 h - Auto. cycle: 11.987 h * CNC control HEIDENHAIN iTNC 530 * Electronic handwheel * Automatic universal milling head (overhauled in 2018), 2.5 / 2.5 deg. indexing * Coolant device with paper band filter * Cooling through the spindle * Chip conveyor * NC rotary table YRT F 1000/1250 (4th axis): - Diameter 1250 mm - Max. load 3500 kg - Overall height 265 mm - Table top thickness 125 mm - Partial accuracy +/- 2.5" x-travel 2500 mm y-travel 1600 mm z-travel 1200 mm Table dimensions 2860 x 1200 mm tool taper ISO 50 spindle turning speed range 20 - 3000 rpm max. torque on the spindle 700 Nm feed range 2 - 10000 mm/min rapid traverse 25 m/min Hjdpfew Icccsx Aaqow spindle motor 32 kW weight of the machine approx. 25,0 t

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 22,000 rpm, table load: 3,000 kg, Heidenhain TNC 640 CNC TRAVELS Longitudinal travel: 1.750 mm Transverse travel: 1.400 mm Vertical travel: 600 mm Feed speed: 35.000 mm/min Acceleration: 6 m/sec WORK AREA Table dimensions: 1.000 x 1.200 mm Table load capacity: 3.000 kg Distance between table and spindle nose: 205-805 mm Maximum horizontal passage: 1.430 mm Work table height from ground: 855 mm DIMENSIONS Hsdpfx Aaoxtqq Rsqew Maximum height: 3.850 mm Base module dimensions: 6.000 x 4.000 mm Floor area: 24 m2 ELECTROSPINDLE S1 power: 26 kW – 1500 HP 18.5 Maximum spindle torque S1: 105-12 Nm Maximum spindle rotation speed: 22.000 rpm Tool holder: HSK A63 E40 Machine complete with: • 5-axis direct-drive universal milling head with continuous movement of the two bodies • Tool changer • Instruction manuals and CE declaration

Condition: excellent (used), MIKRON WF 3 DP universal milling machine TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 Hsdpfx Aelnfggeaqow T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: ready for operation (used), Year of construction: 1989, Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Hjdpfxoxrbnqo Aaqjw Drive: 6.3 kW Weight: 2.5 t Price: EUR 2,000 – plus VAT, ex location

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds Hjdjxmatnepfx Aaqsw - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: used, Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total height: 3,100 mm, overall weight: 850 kg, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, Well-maintained Zwick Roell universal testing machine mounted on a base with safety door, including load cell, extensometer, controller, and additional tooling for clamping flat tensile specimens. Supplied without specimen holders and threaded inserts. Test space dimensions: 640 x 1935 mm. Software: testXpert II with master test protocol for tensile tests, declaration of conformity, and CE marking. After powering off and on, an error occurs indicating the extensometer cannot be addressed; this can be resolved by unplugging and reconnecting the interface cable. Otherwise, the machine functions perfectly and remains DAkkS calibrated until January 2026. Hodpjxrdbtefx Aaqew

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center Hodpfx Ajxl E Syeaqew In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Hsdpfxjxl Tcge Aaqjw Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: used, Year of construction: 1999, x-travel 800 mm Hodpfx Aajxmtvceqew y-travel 700 mm z-travel 600 mm Control Heidenhain TNC 426/ 430PB total power requirement 15 kW weight of the machine ca. 8,4 t

Condition: used, Year of construction: 2008, - Drilling width: 220 mm - Drilling depth: 170 mm - Drilling height: 180 mm - Weight: 210 kg - 2-speed motor 1.4/1.8 kW 1385/2800 rpm - Drill head rotatable 65° to the right and left - Drill chuck: 20 mm - 1 eccentric presser - 2 clamping pins - 1 miter stop 60° right/left - 1 mounting rail at the front end - 2 side mounting rails - 4-wheel carriage with 2 swivel castors and 2 stabilizers on its own frame - Machine from the first owner - Carefully maintained Hedpfx Aswpfd Hsaqow

Year of construction: 1983, condition: good (used), 1 Bracket milling machine make: RECKERMANN, type: KOMBI 900, year 1983 ser. no. 6367P, table size 1.000 x 310 mm, travel X/Y/Z 720 x 220 x 450 mm, Hodpfx Aash E Du Doqow tool holders SK 50, HD machine vice, spindle speeds: 3...2800 rpm

Condition: ready for operation (used), Year of construction: 2000, Table length: 530 mm Table width: 230 mm Table height: 800 mm Hodpjp Dt T Eofx Aaqew Table fixed Drilling length: 200 mm Drilling depth: 150 mm Height adjustment: 200 mm Drill chuck diameter: 0 - 20 mm Drilling speed: 2800 rpm Motor power: 2.2 kW Weight: 160 kg

Condition: good (used), x-travel 300 mm y-travel 350 mm z-travel 350 mm taper in main spindle ISO 40 table surface area 625 x 380 mm T-slots 8 Stk. turning speeds 40.0 - 2.000 U/min transmission ratio 18 Stk. feed stepless 0 - 500 mm/min quill stroke 60.0 mm distance spindle nose and table min 50 / max 400 mm Hjdpfx Ajxl E Stjaqew voltage 400 V total power requirement 5.1 kW weight of the machine ca. 800 kg range L-W-H 1400 x 1100 x 1700 mm from a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot angle/clamping table * Swiveling +/- 30 degrees - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: good (used), Year of construction: 1985, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm Hedew Hxw Ispfx Aaqew - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Year of construction: 2017, Ref. -No.: 10570 Manufacturer: FERMAT Type: WFT 13 R Year of construction: 2017 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 4000 mm Y-Travel: 3000 mm Z-Travel: 1500 mm W-Axis: 730 mm V-axis: 700 mm Bore Spindle Diameter: 130 mm Rotary Table (Lxw): 2000 x 3000 mm Table Load: 25000 kg Tool Taper: SK 50 / ISO 50, DIN 69871 Form AD Tool changer: Robi 105 Spindle Speed: 4000 RPM Rapid Travel X/Y/Z: 20000 mm / min Main Drive: Siemens 41 kW S1 kW Servo drive: 2 Pcs pinion: 2 Pcs Internal cooling: 70 bar handwheel: Heidenhain HR 550 spindle support: 250 mm Ejection height: 900 mm Probe: Renishaw RMP 60 Table Diameter: 4300 / 2000 Ø / mm Rapid traverse V-axis: 10000 m / min Further information: - Vertical control panel with integrated keyboard and 15-inch LCD screen - Master-slave system, max. load 20 t, ROD encoder on the B-axis - Heidenhain optical linear system, absolute for the V, W, X, Y, and Z axes - Machine with increased accuracy - Control cabinet with air conditioning - Automatic lubrication system Hsdpfxoxmd Uij Aaqow - Automatic clamping of accessory heads - Hydraulic device - Spindle bearing cooling unit for temperature stabilization - Chip conveyor as segment conveyor with integrated pump for coolant circulation (including level gauge and filtration) - CNC adjustable with paper belt filter - Sump pump with level gauge - Manual milling head UHM 30 with automatic clamping The machine can be viewed under power by appointment.

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg Hedpjxl E Smefx Aaqow range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Hsdpfx Aoxmd T Eeaqew Type of control: CNC Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm

Condition: good (used), x-travel 315 mm y-travel 180 mm z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis * Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis Hedpfx Aexl E Sgeaqew - Control cabinet, installed on the left - Coolant device