Used Universal Punching Machine for sale (64,106)

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min Ncsdpfeu Ndd Rox Ab Tsn feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *

Condition: good (used), Working Area Table size: 1250 x 740 mm Nedpfoygctrsx Ab Tecn Travel paths X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (transverse): 750 mm Manual cross-movement of table: 275 mm Working Spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and Feeds Speed range: 32 – 1600 rpm, infinitely variable Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Drive power: 5.5 kW Resolution of linear measuring systems: 0.01 mm Weight and Space Requirements Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 4800 kg Accessories / Special Features: • 3-axis digital readout, make: HEIDENHAIN • Speed range is infinitely variable via MITSUBISHI A700 inverter (retrofitted in 2006 with a new control cabinet) • Tool holder ISO 40, DIN 2079 • Universal clamping table (rotatable, tiltable, and swivelling) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m Ncjdpfx Abox Ndbqj Tsn - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: good (used), Year of construction: 2003, CNC milling machine Ncjdpfxjyl R S Hs Ab Tjn Manufacturer: MAZAK, model VCN - 410 A, year of manufacture: 2003, Weight: 4920 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, Vertical Machining Center Manufacturer: DMG Model: DMU 80 P duoBLOCK Year of manufacture: 2005 Control: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel paths X: 800 mm Y: 800 mm Z: 800 mm Tool changer: 40 stations Spindle speed: 18,000 rpm Chip conveyor: Yes Ncsdpjyli N Djfx Ab Tjn Internal coolant supply: Yes Weight: approx. 14,000 kg - Universal milling head with controlled B-axis - HSK 63 - Heidenhain TS641 probe - NC rotary table Ø 900mm x 700mm, permissible load 1,400 kg - New motor spindle in December 2025 - B-axis new + wear parts replaced in 2024 - C-axis new + wear parts replaced in 2023 Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2020, 2020 BAYKAL BPMT-1525x30 CNC Punching Machine with Bosch MTX Control CNC controller: Bosch MTX, Maximum press force: 30 t, Working range: 3000 x 1500 mm, Slider stroke number: 900/min, 20-station turret head, Tool rotation: indexable, Number of indexable tools: 4, Foot switch control, Oil tank capacity: 350 l, Sir pressure: 6 bar, Power: 15 kW, Power supply: 3x 380 V; 50 Hz, Dimensions (L x W x H): 6370 x 5710 x 2220 mm, Weight: 15000 kg, S/No: 27529. Ncjdpfoyml Uljx Ab Ton

Year of construction: 2003, condition: used, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Ncsdpfebpmurjx Ab Ten Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E [...]

Condition: like new (used), Year of construction: 2023, functionality: fully functional, DMG CMX 50 Year of manufacture: 2023 Ncjdpfjyg Nqkjx Ab Ton Spindle hours: approx. 1,300 h Spindle: 15,000 rpm inlineMASTER Tool holder: SK40 Tool stations: 30 slots Control: Siemens 840D sl X travel: 500 mm Y travel: 450 mm Z travel: 400 mm Weight: 4,700 kg

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine xH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Ncsdpovc Aw Sofx Ab Tjn Heidenhain measuring device *

Condition: excellent (used), Year of construction: 2008, HEIDENHAIN iTNC530 with A + C axis Working travels 712 x 508 x 515 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Tool breakage control Tool lenght measuring device Chip conveyor Misc. accessories Nsdjtt R E Tjpfx Ab Tecn MARCELS MASCHINEN CH

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. Ncedpfjygwz Rjx Ab Ten The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg Ncjdoyg Dk Sjpfx Ab Ten The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, The machine is a fully functional, continuously controlled 5-axis unit. It was commissioned in 2010. Control system: HEIDENHAIN I TNC 530 + universal KINEMATICS. Tool magazine with 48 positions. Direct measurement in all 5 axes. The machine was used for single-shift, piecework operation. The machine is still occasionally used up to today. It is still connected and can be inspected under power. The model is still being produced with the same technical specifications. New chip conveyor installed. Spindle speed: 15,000 rpm. Workpiece probe: Renishaw + tool probe: BLOOM (laser) – both highly precise. The machine is equipped with a LOSMA oil mist separator. The machine is reliable. The spindle was replaced (not refurbished, but brand new) approximately 5 years ago by an authorized service provider. Accessories included: five-axis vise and 48 various clamping devices (almost full equipment). New LED lighting installed. The machine is excellently maintained and, for its age, is truly in outstanding condition. Ncedpsymg Iyjfx Ab Ten

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Nodpfeyfhahsx Ab Tscn Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: good (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser power: 2,700 W, punching force: 220 t, punching diameter: 76 mm, stroke rate (min.): 600 1/min, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, workpiece weight (max.): 200 kg, overall weight: 22,500 kg, total length: 9,100 mm, total width: 7,100 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Njdpfx Aeymr Edeb Tjcn

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system Nedpex R Tiaofx Ab Tscn - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: new, Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: UT1809, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Machining Center U-1530 Advanced Travel distances: X = 1530 mm, Y = 530 mm, Z = 465 mm Linear guides on all three axes High-precision MILLING SPINDLE up to 12,000 rpm / 22 kW / 120 Nm (10% duty cycle) In-line spindle with direct drive, beltless / SK40 Automatic SPINDLE AIR SEAL SHUTOFF TOOL MAGAZINE with 54 tool stations 2-axis ROTARY-TILT TABLE D=650 mm in PRECISION DESIGN "T" with counter bearing at the front of the table console (supported on both sides). Table rotary diameter: 650 mm -> High table load capacity: 500 kg -> Swivel range: B = -90° (-50°)/+110° DIRECT MEASURING SYSTEM on B and C axes Ncedpfx Asrtpmheb Ton HYDRAULIC BRAKE for tilt axis B and rotary axis C FIXED TABLE left in the work area U-1530, can be saddled at two levels DIRECT MEASURING SYSTEMS on X/Y/Z axes SIEMENS 840D Control with the following standard features: - SPINNER - SPIOS 24" touch panel for I4.0 applications - Height-adjustable, rotatable, and tiltable control panel for optimal ergonomics - Incl. engraving cycles - 24" LCD color flat-screen with multi-touch functionality - 2 GB user memory - 15 zero point shifts - 1 free USB interface - Standard Ethernet interface SPINNER MULTI-CONTROL-WHEEL on the control panel -> All major setup operating functions integrated into one multifunctional handwheel SHOPMILL step programming, 3D SIMULATION, REST MATERIAL DETECTION, DXF reader, LIVE PLOTTING of machining process Energy-saving function including automatic machine shut-down Multi-axis interpolation > 4 axes - "TRAORI" 5-axis transformation with tool orientation - 5-axis tool length compensation - Tool retraction on interruption - RTCP swivel axis manual operation Cycle 996 for KINEMATICS MEASUREMENT "ADVANCED SURFACE" for surface quality optimization "SPLINE INTERPOLATION" for reduced machining times (depending on raw data) 2 GB additional user memory PROBE FUNCTIONS for integration of a measuring probe UNIVERSAL CHIP CONVEYOR SPINDLE PREPARATION FOR HIGH PRESSURE HIGH PRESSURE TANK 70 bar with paper band filter Blow air at spindle head Central compressed air via milling spindle Cleaning gun in machining area PREPARATION for SPINNER STANDARD MEASURING PROBE with receiver unit STANDARD DOCUMENTATION in digital form on the control unit LIFTING EYES for crane unloading STANDARD PAINT two-tone, light grey RAL7035 and blue-grey RAL5008 PACKAGING Notes: The price includes warranty services only within Germany. For new and demo machines, the photos shown are not necessarily of the individual machine but of comparable models. Accessories such as clamping devices or tool holders are included only as listed in the technical description. Please request a detailed ex-works offer. Visit our plant near Munich or one of our showrooms. We may have additional offers for similar machines. Interim sale is expressly reserved.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 4501, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotational speed (min.): 6,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Machine configuration: • UniSpeed3500 • Central chip conveyor • Control panel for side and front operation • Platform • Padded seat • Rotoclear side viewing window • 3-color signal lamp • Main drive up to 6,000 rpm • Tool holder SK 50 BigPlus • Orthogonal milling head (C-axis 0.01°, A-axis 0.01°) • Siemens Sinumerik One • HT2 handheld operating device • Rotary table Ø 1,600 mm, 8 t • Side milling table segments • ToolRunner for 90 tools • Coolant system 950 l • Coolant pump 40 bar / 32 l/min Ncsdpoygtqbjfx Ab Ten • Coolant-to-air switching • Wash gun in working area • m&h wireless probe • 1-channel collision monitoring system • Operating mode 3 • Air purification system 4,000 m³/h

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Ncsdpfx Aboyly Drs Tsn

Condition: excellent (used), Year of construction: 1998, Frame dowel and slot mortising machine by Hofmann HT 200 U with adjustable angle Special drilling machine for staircase construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and spindle drilling can be easily performed thanks to the rotating drilling unit. Motor with pole-changing switch, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via practical handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240 mm Line laser for precise workpiece positioning Drilling unit can rotate 65° to the left and right Ncodpfjyfta Tox Ab Ton Pneumatic adjustment of working height, doweling possible on two levels without retooling Desired drilling heights can be set for each drilling level using a handwheel and digital counter. Level switching is pneumatic from the front. Cross adjustment approx. 320 mm, stepless or in 12 mm increments Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, placeable at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as front supports Mobile base Extraction port 80 mm 4 used but good drill bits: 9, 12, 16, 19 mm Few paint touch-ups, very good condition, see original photos A used tilting slot mortising machine in this condition is very rare. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are available for demonstration in our warehouse. See 'more offers from this vendor.'

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Njdpfx Abjxmatnj Tjcn Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Njdpfx Asygv Upeb Tscn Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. Ncodpfjygv Shox Ab Tjn You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: used, Year of construction: 1991, Technical details: x-travel: 1050 mm y-travel: 600 mm z-travel: 650 mm range of revolution per miute: 40 - 1720 / 12 step U/min spindle taper: SK 50 spindle head swivable left - right: 90° re/li und 45° = 360° ° distance spindle nose and table: 0 - 600 mm table surface area: 1700 x 470 mm feed continuous: X/Y= 15 - 625 + Z= 7,5 - 312 mm rapid traverse Z-axis: 1250 mm/min. rapid traverse:: X/Y: 2500 mm/min. total power requirement: 11,1 kW weight of the machine ca.: 2500 kg machine dimensions LxWxH: ca. 2,45 x 2,0 x 2,85 m Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Nedpfx Abeva Hd Rs Tecn Machine vice (jaw width 120mm) *

Condition: used, Technical details: x-travel: 700 mm y-travel: 250 mm z-travel: 200 mm spindle taper ISO: SK40 range of revolution per miute: Spindel 32 - 2000 / 18 step U/min spindle head swivable left - right: 90 ° table surface area: 1000x400 mm weight approx.: k.A. kg Ncedpeva Hfhjfx Ab Tsn dimension machine xH: 1,6 x 1,2 x 1,9 m with vise *