Used Valve Dn 50 for sale (38,261)

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: META Thyssen Included in the scope of delivery: 01x Pallet rack beam, used Ppjdpfexck R Aex Aqvjw Material color: orange Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3 HK (hooks) Clear span: 2,700 mm 02x Locking pins, used Design: fully galvanized For securing the cross beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This article is only available for collection. Transport or shipping beyond this will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Psdowucmpjpfx Aqvepw Included in delivery: 01x pallet rack beam, used Material color: Sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO 089 | 2 Hook: 5 HK Clear width: 1,445 mm 02x safety pin, used Design: Sendzimir galvanized For securing the longitudinal beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. If transport or shipping is required, additional costs will be incurred, which can be clarified separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Included in delivery: 01x pallet rack beam, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Beam type: SLO 089|2 Connector: 5 HK Clear span: 1,140 mm 02x safety pins, used Finish: sendzimir galvanised For securing the longitudinal beams Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Ppodpfxowuf E Ie Aqvjw General information about the item: This item is available for collection only. Further transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical specifications of the pallet rack beam: Rack system: Bito Type: PRO Included in the scope of supply: 01x pallet rack beam, used Material color: blue Beam type: PT150S Box section: 150 x 50 mm Connector: 5 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 4,000 kg (with evenly distributed load) 02x safety pins, used Version: fully galvanized For securing the beams against accidental lifting Your contacts in our company: Mr. Andre Evering Ppedpfsw Eu Dnox Aqvjw Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or dispatch of this item beyond this is subject to additional costs, which can be individually requested from us depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. The scope of delivery includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,000 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight/piece: approx. 10.000 kg The CS Sigma profiles may be bent or have slight damage or signs of rust. Our services at a glance: (Prices upon request) Pjdpegfbytjfx Aqvspw Assembly and installation Please note our general assembly conditions. Rack inspection Rack inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234, visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Condition: good (used), Technical Data for the Pallet Rack Beam: Racking System: META Thyssen Ppedpfsw Ektrox Aqvsw Scope of delivery includes: 01x Pallet rack beam, used Material color: orange Beam type: HS 140|15 Box profile: 140 x 50 mm Connection: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 3,300 kg, with evenly distributed load 02x Safety pins, used Finish: fully galvanized For securing the longitudinal beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transport or shipment of this item beyond that can be arranged at additional cost, which can be individually requested from us depending on delivery location and scope.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Polypal Type: Stockpal Included in delivery: 1x pallet rack crossbeam, used Material color: RAL 5001 blue Box profile: 120 x 50 mm Type: SKVBN 12050CP33 Hooks: 2 HK (hook) Clear width: 2,700 mm Max. load per pair of crossbeams: 3,000 kg, with evenly distributed load 2x locking pins, used Pjdpfx Aqswm Eq Ievepw Design: fully galvanized To secure the longitudinal beams Prevent accidental lifting Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the pallet rack beam: Racking system: Dexion Type: P 90 Scope of delivery: 01x pallet rack beam, used Material colour: sendzimir galvanised Box profile: 102 x 50 mm Beam type: SLO 102|2 Bracket: 5 HK Clear span: 1,450 mm Psdpfx Aqowub Edjvopw 02x locking pins, used Design: sendzimir galvanised For securing the longitudinal beams Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only offered for collection. Delivery or shipping of this item is available at additional cost, which may be quoted separately depending on place of delivery and quantity.

Condition: good (used), Technical data for pallet rack beam: Racking system: Metall Sistem Type: Unipal Pjdpfx Aexb Tp Eeqvopw Scope of delivery includes: 01x pallet rack beam, used Material color: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur extra costs, which can be quoted separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical specifications for the pallet rack crossbeam: Shelving system: Stow Type: Pal Rack NS Included in delivery: 1x pallet rack crossbeam, used Material color: RAL 2004 orange Box profile: 80 x 50 mm Crossbeam type: PNB0488 Ppedowaap Sepfx Aqvsw Hooks: 4 HK (hook) Clear width: 2,190 mm Max. load per pair of crossbeams: 1,000 kg with evenly distributed load 2x locking pins, used Design: fully galvanized To secure the longitudinal beams against accidental lifting Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2014, operating hours: 13,287 h, 2014 | Volvo EC250DNL with 3 excavator buckets | Used Tracked Excavator | 13287 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 51 approved ✅ 10 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: UVV 07/26 slewing ring new, swivel joint new, neck cylinder new, ARG radiator on the engine replaced, all large water hoses on the engine replaced, coolant hoses, undercarriage 2 times new track tensioners, 2 times new drive gears, 2 times new battery, expansion tank new, teeth on the bucket changed, all bucket floors welded, new software uploaded, the cutters on the digging bucket changed, oil, filters were changed regularly. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40205 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Pjdpeyi Dw Rjfx Aqvjpw ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: MV0053-000508, number of tool stations in tool turret 3: 30, tool holder type of tool turret 2: BT 40, Used 5-axis vertical machining center with FANUC 0i-MD CNC control. Ppsdpozihl Djfx Aqvsw

Condition: used, mileage: 49,986 km, power: 96 kW (130.52 HP), first registration: 07/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,786 mm, loading space length: 3,350 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1093. PS12908 ----EQUIPMENT - Airbag, passenger side Ppjdpfx Aqozalx Dovew - Express Line package - Double-wing rear door, 256°, without window - LED lights in the cargo area - Package: Technology Package 6P - Exterior mirrors with turn signals, electrically adjustable, heated and automatically folding - Blind Spot Assist including Cross Traffic Alert - Audio system 3 - Fog lights - LED downlight - Pre-Collision Assist, camera and radar-based - Emergency Brake Assist (rear) - Lane Keeping Assist including Lane Departure Warning - Traffic Sign Recognition System, extended - Park Pilot System front/rear including Active Park Assist - Cruise control, adaptive - All-round camera - Navigation - Central locking with remote control - Transmission: 6-speed manual - ABS, EBD and DRIVER ASSISTANCE - Airbag, driver side - Exterior mirrors, electrically adjustable and heated - Battery: Extended battery life - On-board computer - Roof, high - Double-wing rear door/180° (without window) - Tachometer - Third brake light - Power windows, front - Parking brake, electronic - Ford Easy Fuel - FordPass Connect - Halogen headlights with daytime running lights - Glove compartment with lockable lid - Interior lighting with delay function - Automatic climate control - Fuel tank 70 l - Paint: Solid color paint - Cargo area lighting - Emergency call assistant - Package: Technology Package 2 - Particulate filter: Diesel particulate filter - Radio: 12" Mltf display & Ford SYNC 4 - Tire pressure monitoring system - Windshield wipers with rain sensor - Sliding door: Sliding door, right - Mud flaps, rear - Side protection strips - Power steering - Seat belts - Seats: Seat Package 18A - Start-Stop system - Partition (plastic) at the height of the B-pillar - Rear step - Recirculation mode - Tie-down points - Immobilizer - Heat-reflective glazing, lightly tinted - Central locking with remote control - Overhead storage compartment, front ... and more. ----The vehicle is in original condition! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / Leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: like new (used), Year of construction: 2022, operating hours: 1,496 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, type of input current: AC, overall weight: 3,600 kg, power: 30 kW (40.79 HP), input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, 5-axis CNC lathe "DN Solutions model LYNX 2100LMSA" with sub-spindle, driven tools and CNC FANUC i-PLUS iHMI complete with "TOP model FUSION" bar loader. Ppjdpfxjtq Aylo Aqvew

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ML0313-000510, turning length: 1,275 mm, turning diameter: 481 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, The machine has only been in operation for approximately one year! MACHINE DETAILS Ppjdpezf I Scefx Aqvew Power supply: AC 380 V, 3 phases, 50/60 Hz Rated power: 36.11 kVA Full load current: 54.87 A Machine weight: 6,900 kg FEATURES CNC control with operator panel Tool turret Tailstock Spindle chuck Enclosed working area Long-bed design CE marking The following data is taken from a manufacturer's data sheet. The seller assumes no liability for its accuracy: TECHNICAL DETAILS Standard spindle chuck, main spindle: 12″ Maximum turning diameter: 481 mm Maximum turning length: 1,275 mm Travel distances Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Travel X-axis: 260 mm Travel Z-axis: 1,350 mm Main spindle Spindle speed max.: 2,800 rpm Spindle power max.: 35 kW Spindle torque max.: 1,613 Nm Tool changer Number of tools: 10 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,633 x 2,394 x 2,110 mm Machine weight: 6,900 kg

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 Pjdpfeyycwrex Aqvspw - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) Pedpfx Aeyycwlsqvjpw - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Pedpfx Aqeqzhfxsvjpw Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB • Model / Type: RIO50-40D • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 Ppjdeyhhmgepfx Aqvjw • Power consumption (P1): 180 / 240 / 330 W • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. Pjdpoyuqrfofx Aqvjpw The listed price is for 1 piece.

Condition: excellent (used), For sale: Professional GARANT SK40-6-50 tool holder for precise clamping of Ø6 mm tools. Product of the renowned Hoffmann Group / Garant – Germany, used in CNC machining centers. • Clamping type: SK40 (DIN 69871) • Size: Ø6 mm • Length: 50 mm • Catalogue number: 300210.6 • Balancing: G2.5 up to 25,000 rpm • High accuracy, stable clamping • Ideal for VHM end mills and drills as well as precision tools • Very good condition – tested, ready for use. GARANT tool holders represent the top tier in clamping technology – guarantee of quality and durability. -- PRICE PER PIECE -- Ppsdpsw Syzwjfx Aqvjw

Condition: excellent (used), For sale: professional SK40 milling tool holders Ø8-50 according to DIN 69871 AD. • Taper SK40 • Weldon clamping Ø8 mm (side screw) • Length 50 mm • Central cooling AD • Very good condition – used, fully functional • Some holders are sold complete with milling cutters and drills. Pjdpfx Aqexcgzqevopw

Condition: excellent (used), Professional outside micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device features high accuracy and robust construction, while its large LCD display enables quick and convenient readout of results. . Measuring range: 25–50 mm / 1–2” . Resolution: 0.001 mm (1 µm) . Functions: ZERO, ABS, REL, TOL . Protection class: IP65 – dust and splash resistant . Power supply: CR2032 battery (3 V) . Ergonomic, precision design made of hardened steel . Clear LCD display . Catalogue number: 4157042 . Manufacturer: Mahr GmbH – Germany Included: . Mahr Micromar 40 EWR-S digital micrometer . Calibration standard . Adjustment key . Documentation and user manual . Original carrying case Device condition: very good – fully functional and ready for operation. An excellent choice for industrial plants, precision workshops, and measurement laboratories. Ppodpfx Aexl Rf Soqvjw

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: Pjdpfx Aeyzixljqvopw industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Pedpoyxtfwefx Aqvopw Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)