Used Various Accessories for sale (27,408)

Condition: used, TECHNICAL DETAILS - Volume : 4.3 [l] - Timer : 0-120 [min] - Temperature setting : 0-100 [°C] Iodou D I H Sepfx Akxsif

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] Iedpou D I Hxsfx Akxeif - Cooling : No

Condition: used, TECHNICAL DETAILS - Max. heating bath temperature : 99.9 [°C] - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No Iodju D I H Ejpfx Akxsif

Condition: used, TECHNICAL DETAILS 220 POWER SUPPLY - Timer : min [min] Iiedeu Dbpaopfx Akxof - Temperature : °C [°C]

Condition: used, TECHNICAL DETAILS 220 POWER SUPPLY - Timer : min [min] - Temperature : °C [°C] - Capacity : 6,9 [l] Iiedpfx Asu Dbpgekxef - Tank dimensions : 488 x 120 x 99 [mm] - Basket dimensions : 465 x 106 x 49 [mm] - Machine weight : 5,6 [kg]

Condition: new, Accessories + spare parts for all filter presses in all sizes and qualities, short delivery times, ask us Location is 58762 Altena Ijdpfx Aksikl Ufjxjif

Condition: used, functionality: fully functional, empty load weight: 5,150 kg, total length: 2,750 mm, load capacity: 11,340 kg, construction width: 3,400 mm, Accessories Condition: Refurbished without warranty Isdpjzlli Sofx Akxsif Technical condition: very good Description: SMAG 2-shell bulk material grab, S/N 5311, Capacity 6,3m³,

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. Iiodpsxc E Trsfx Akxjf The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: excellent (used), Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Iedpfxjzii N Ds Akxeif

Condition: used, Garage box / loading container / case / insulated case / cooler Closed container / closed case Without cooling unit Loading space: Length: 8.0 meters Width: 2.46 meters Height: 2.05 meters Iisdpfjzqdayox Akxof Can serve perfectly as a garden shed / garage. Some photos to illustrate how it can look after your own customizations. Sold as shown in photos 5 - 7 Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m Iiedpfx Aozhpkljkxef 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, PSS 35hl brewery for sale including: * Grain storage, milling and handling * 35hl brewhouse comprising mash tun, lauter tun, wort kettle, whirlpool, HLT, CLT Iodpfxev Av Ane Akxeif * 18 - PSS FT-140HL fermentation vessels * Yeast tanks * 3-tank CIP plant * Centec Degas 5hl/hr de-aeration system * Romfil XFA8-B filtration unit * Centec FlashPasto 25hl/hr flash pasteuriser * 2 - 140hl bright beer tanks * Services including Certuss TC1500 steam generator, RO plant, glycol system, compressed air plant Equipment manufactured 2018, installation incomplete

Condition: excellent (used), Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. Iijdeynkbajpfx Akxef This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Iodpfxjzizrko Akxeif Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Year of construction: 2012, condition: used, Second-hand unit Year of manufacture: 2012 Equipment for the easy assembly of drawers Iedpozk Nxuefx Akxeif Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2008, functionality: unexamined, conveyor belt length: 5,700 mm, conveyor belt width: 380 mm, total length: 5,900 mm, total width: 400 mm, 2x Conveyor belts with plastic modular belts. Iedpfx Aszd E Nijkxsif The belts are made entirely of stainless steel and were used for frozen food. Ready for immediate use. Belt 1: Flat belt, S-shape, L = approx. 4000 mm, W = 370 mm, H = 350 mm. Price per belt: 2,000.00 Belt 2: Inclined belt, straight, L = approx. 3700 mm, H1 = 350 mm, H2 = 900 mm. Price per belt: 2,000.00 Vibratory feeder, trough 1830x300, H = 220. Price: 1,600.00 + Frame, W 580, L 870, H 1300 1 x Rotating and collecting table, D = 1500, H = 800. Price: 1,000.00 Price net / per piece.

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Manufacturer: Klingelnberg Iedoytrh Eepfx Akxsif Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries.

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Iisdszl Tb Nepfx Akxof Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: like new (used), functionality: fully functional, Are you looking for a good unused like new Chip/swarf conveyor? We have 3 units units of different sizes available for sale. Please contact us for more information and sizes required. Each unit is a bargain at only €1,200 each Iisdpey Ifm Eefx Akxef

Condition: good (used), Pipe welding accessories, forming gas welding equipment, forming gas welding aid Iijdpfx Asb A N Apskxef -Diameter: 600 mm -Rubber sealing lip -with transport rollers for disassembly from the pipe to be welded -Dimensions: 650 x 450 mm -Weight: 18 kg

Condition: excellent (used), strapping machine, strapping set, tensioning and sealing device, textile strapping set -Manufacturer: Vematec, textile strapping set 19 mm with tensioning device, unwinder, accessories -Steel reel: with 2x polyester tape width 19 x 1 mm -Staples/reel tensioners: see photos -Transport dimensions: 560/480/H480 mm -Total weight: 32.4 kg Isdpfxevrdzwo Akxoif

Condition: excellent (used), Cutting nozzle, welding torch, plasma torch, hand arc piercing torch, gouging torch, torch accessories, torch nozzles, cutting nozzles, flame cutting system, torch -Manufacturer: Hypertherm, extensive range of plasma torch accessories unused Ovp Ijdpfx Ajw Ud Dbjkxsif -Type/Quantity: see photos / parts list -Ring electrode: iht 6534-1-100 3 pieces -Price/Delivery: complete -Transport dimensions: 360/280/H165 mm -Weight: 3.8 kg

Condition: good (used), Barrier, safety fence, fencing system, machine barriers, railings -Fence elements made of box tube: 40 x 40 mm Iedsb R Actspfx Akxsif -Various stands made of box tubing: 80 x 80 mm/60 x 40 mm/40 x 40 mm -5x fence panels: Fence height 1160 mm, lengths 5480/4670/1875/1380/520 mm = approx. 14 m -1x fence panel: Height 1265 mm Length 2200 mm -1x fence element: Height 720 mm Length 2170 mm -Transport dimensions: 5500/1200/H500 mm -Weight: 360 kg

Condition: used, Controller, Ecograph, Alpha-Log, Data Recorder, Recorder, Color Hybrid Recorder -Endress Hauser: Alpha-Log color hybrid recorder with accessories -Recorder: Type RSA10-31B1T -Isolation amplifier: RN 221 -Modbus: RS 485 Iijdpfx Aji Huvwokxjf -Thermometer: TST 10 -Pressure transmitter: PMC 133 -Individual components: see photos -Price/handover: complete -Transport dimension: 500/500/H200 mm -Weight: 11 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Quantity: 1x unit available -Dimensions: 400/180/H500 mm Iedpsb Tuq Aofx Akxoif -Weight: 32 kg