Used Versatile 935 for sale (1,696)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Cedpfxszn Rdme Ahtsrf Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 340590, new RENNER SCROLL SL-NEO 7.5 I (8 bar) oil-free compressor Year of construction: 2025 Operating hours: 1 hr Pressure: 8 bars Rated power: 7.50 kW Crsdsv Al Nqspfx Ahtof Delivery quantity: 890 l/min Sound level: 69 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 835 x 595 x 935 mm Weight: 195 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 34456540, new RENNER SCROLL SL-NEO 7.5 S (10 bar) oil-free compressor Controller: RENNERtouch Year of construction: 2025 Operating hours: 1 hr Pressure: 10 bars Rated power: 7.50 kW Delivery quantity: 755 l/min Crsdpfx Ahjxvzbfotof Sound level: 61 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 975 x 595 x 935 mm Weight: 205 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, reverse speed: 25 mm/s, Special Offer – 5% Discount Available! Hydraulic C-Frame Press – 1000 kN (102 Tons) The Hydraulic C-Frame Press is a professional industrial machine designed for demanding pressing, straightening, bending, assembling and forming operations. Its open C-frame construction provides excellent access to the working area, making it easy to machine larger workpieces and handle materials from multiple sides. The rigid welded steel frame ensures maximum stability, durability and long service life. The precision hydraulic system provides smooth control of both pressing force and ram speed, ensuring reliable performance and high machining accuracy. This versatile press is suitable for industrial production, maintenance departments, tool rooms, metalworking workshops and automotive applications. Main Features * Pressing force of 1000 kN (approx. 102 tons) * Open C-frame design * Heavy-duty welded steel construction * Precise hydraulic control * Smooth ram movement * Excellent access to the working area * Suitable for industrial and workshop applications * CE certified Technical Specifications * Pressing force: 1000 kN (approx. 102 tons) * Maximum hydraulic pressure: 25 MPa * Maximum opening: 600 mm * Ram stroke: 300 mm * Table dimensions: 700 × 500 mm * Throat depth: 250 mm * Downward speed: 11 mm/s * Return speed: 25 mm/s * Motor power: 5.5 kW Applications * Pressing * Bending * Straightening * Assembly operations * Metal forming * Metalworking workshops * Automotive industry * Tool rooms * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Crodpfx Ajyrr Rkohtef Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: excellent (used), Year of construction: 2017, Available: 2 pieces! condition to check Possibility to buy the high-lift order picker with a set of brand new batteries with a 2-year warranty for 3,500 euros or for 3,000 euros with used batteries Year of production 2017 Crodpfx Ahjvday Hetjf Load capacity 215 kg Lifting height 3000 mm Travel speed 8 km/h Total length 1528 mm Battery voltage 24V Model EKM-202 Negotiable with larger quantities, big discounts! The agile and versatile EKM order picker is ideal for use in stores, for light maintenance work or order picking without a pallet. The stable mast allows you to lift items up to the third level of the rack - this is the best alternative to a traditional ladder. Automatically closing doors ensure operator safety even at high lifting heights. A sensor mat on the floor increases mobility in the driver's cabin, so the operator can freely choose his position on the standing platform. The spaciously designed workspace guarantees the operator greater comfort while driving and standing sideways. Good visibility in the direction of travel is provided. Ergonomically positioned controls allow simultaneous lifting and steering, which makes working with the EKM very efficient.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Crodpfxeyvh Hqo Ahtef Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2026, CORMAK PT265 230V Planer Thicknesser – Advanced Compact Woodworking Machine The CORMAK PT265 230V planer thicknesser in its new version is a technologically advanced woodworking machine designed for users who require precision, efficiency, and a compact design with single-phase power supply. This multifunctional machine combines the functions of a surface planer and thickness planer, offering improved machining accuracy thanks to an innovative synchronized table system. It is a professional solution for craft workshops, carpentry shops, and demanding hobby users working with both hardwood and softwood. Main advantages of the machine New integrated working table system – simultaneous adjustment of the infeed and outfeed tables eliminates the need for separate calibration and improves machining accuracy. Stable and heavy-duty construction – a 170 kg machine weight and wide cast iron working tables reduce vibrations and increase operator safety. Powerful 2.6 kW (S6) motor – additional power reserve enables efficient processing of demanding and hard wood species. Quick function conversion – easy switching from surface planer mode to thickness planer mode thanks to a simple table lifting and dust extraction cover system. 230V power supply – allows operation in workshops without access to a three-phase electrical installation. Construction and technology The CORMAK PT265 planer thicknesser is equipped with a modernized working table system operating synchronously and maintaining the set working plane. This eliminates common problems found in older machine designs, such as level differences between tables that may cause machining inaccuracies. The three-knife cutter block with a 75 mm diameter, rotating at 4000 rpm, ensures excellent surface quality and precise material processing. The 700 × 150 mm aluminium fence with angle scale allows accurate adjustment from 90° to 45°, increasing the versatility of the machine for various woodworking applications. Precision and working efficiency Thanks to precise height adjustment with a clear graduated scale and the centrally mounted thicknessing table on a rigid column, the CORMAK PT265 wood planer thicknesser provides stable and repeatable operation. The machine offers a maximum cutting depth of 3 mm and a feed speed of 6 m/min, allowing fast and efficient processing. Standard equipment Ø75 mm cutter block with three knives Modern synchronized cast iron working tables, precision-ground Aluminium guide fence 700 × 150 mm with angle scale Crjdpfx Aewu T S Aohtof Ø100 mm dust extraction outlet for chip extraction connection Quick conversion system between surface planer and thickness planer functions Operating manual (DTR) CE Declaration of Conformity Technical specifications Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Cutter block length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum planing width 265 mm Maximum thicknessing width 265 mm Maximum thicknessing height 180 mm Maximum thicknessing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Motor power S6: 2.6 kW Power supply 230 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2026, Machine vice QH160 160x125 mm – precise and reliable clamping for high-force machining applications Machine vices from the QH series are robust and reliable solutions designed for professional metalworking applications. The QH160 model, with a 160 mm jaw width and 125 mm maximum opening, is ideal for operations requiring secure and precise workpiece fixation. Thanks to its high-quality cast iron construction and a 360° swivel base with graduated scale, the vice provides versatility, repeatability, and high efficiency in everyday industrial use. Main advantages of the QH160 machine vice 360° swivel base with 1° graduation – enables precise positioning of the workpiece at the required angle. High-quality cast iron construction – the body and movable jaw provide excellent rigidity and resistance to deformation. Lead screw protected against chips and contaminants – ensures long service life and reliable operation. High clamping force up to 3000 kg – allows secure fixation of larger and heavier workpieces. Removable swivel base – enables the vice to be used as a fixed version when maximum rigidity is required. Construction and technology The QH160 machine vice has been designed for intensive operation in demanding industrial environments. The cast iron body provides exceptional stability, while precisely machined surfaces guarantee accurate workpiece positioning. Replaceable jaw inserts require precise machining after installation to maintain tolerances in accordance with technical specifications. Cjdpfx Asvxgm Aohtjrf Precision and work efficiency The combination of a rigid construction, wide jaw opening, and high clamping force allows efficient and accurate machining of various materials. The integrated angular scale enables the operator to position the vice precisely within a 360° range, significantly reducing setup time and improving overall productivity. Applications The QH160 machine vice is suitable for use in: machining plants, tool rooms, metalworking workshops, workstations equipped with drill presses, milling machines, and grinders. It is suitable for both single-piece production and serial manufacturing wherever precise and stable workpiece clamping is required. Standard equipment Swivel base with 360° graduated scale Mounting holes Jaw inserts

Condition: new, Year of construction: 2026, CORMAK RBM 40HV Tube and Profile Bending Machine The CORMAK RBM 40HV tube and profile bending machine is a precise three-roll, roll-type bending machine designed for bending steel tubes, rectangular profiles, and solid materials. It enables operation in two working positions – vertical and horizontal – allowing flexible adaptation to different production conditions. Equipped with hardened rollers and a graduated upper roller pressure adjustment system, it ensures high repeatability of bending radii and excellent resistance to wear. Main advantages of the machine Roll-type (non-mandrel) bending system – enables bending of tubes and profiles without the risk of cross-section deformation. Vertical or horizontal operation – allows adaptation to the technological layout of the workstation. Mechanical upper roller pressure adjustment with vernier scale – precise setting of the bending radius. High machine weight (485 kg) – ensures excellent stability and vibration-free operation during bending. Ground and hardened guide rollers – increased durability and accurate material guidance. Foot pedal operation – comfortable and safe control for the operator. Left and right rotation – versatility when producing complex shapes. Design and technology The CORMAK RBM 40HV has been designed for intensive use in industrial environments. The machine body is made of thick-walled, rigid steel components, providing high resistance to twisting forces and bending loads. The bending rollers are manufactured from hardened and precisely ground steel with a diameter of 40 mm, increasing their resistance to wear. The pressure adjustment system with a vernier scale allows the operator to repeatedly set the same bending radius, which is particularly important in serial production. Precision and work efficiency The CORMAK RBM 40HV tube and profile bending machine provides high bending accuracy for both individual components and series production. The gearbox with a motor power of up to 2.2 kW (S6) enables smooth bending of demanding materials, including steel tubes with a wall thickness of 2 mm. The possibility of operation in both rotation directions significantly simplifies the production of closed arcs and spiral-shaped structures. Applications The RBM 40HV model is a professional tool for the metalworking industry, designed for bending materials with various cross-sections. It is ideal for: production of railings, handrails, canopies, and structural components, companies specializing in steel tube and profile processing, metal workshops manufacturing small architectural elements, Csdpfou Snm Isx Ahtjrf serial production of highly accurate bent components. Standard equipment Side guide rollers Foot pedal control system Set of working rollers Technical and Operating Documentation (DTR) in Polish CE Declaration of Conformity Technical specifications Parameter Value Material: round tube 50 × 2 mm Material: rectangular profile 50 × 50 × 2 mm Material: round solid bar 35 mm Material: rectangular solid section 35 × 35 mm Roller diameter 40 mm Motor power S1 1.5 kW / S6 2.2 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 900 × 850 × 1700 mm Weight 485 kg

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Cedpfx Aeu Snlkshtsrf Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: like new (used), functionality: fully functional, Year of construction: 2023, From our demonstration tool inventory, tested and fully functional: New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) with 3 different sanding arms: Paper belt width: 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Included in the set: Belt sander CP5080-4200H18 1 x protective cover without handle 1 x handpiece 8 x sandpaper 1 x sanding arm 13 x 457 mm 1 x sanding arm 16 to 19 x 475 mm 1 x sanding arm 3 to 13 x 457 mm 1 x carrying case Advantages: The sanding head can be rotated 360° to adapt to the working position Easy changing of abrasives and Low contact Simple and robust design Technical specifications: - No-load speed: 20,000 - Power: 400 W Csdov U Ad Nspfx Ahtsrf - Paper tape width: see above under Scope of delivery - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance are available upon request.

Condition: excellent (used), power: 129 kW (175.39 HP), fuel type: diesel, lifting height: 30,000 mm, Year of construction: 2018, operating hours: 2,770 h, Year of manufacture: 2018 Model year: 2018 Empty weight: 21.810 kg Carrying capacity: 5.000 kg GVW: 26.810 kg Lifting capacity: 5.000 kg CE mark: yes Crjdpfx Aezp Hmtshtjf Technical condition: very good Visual appearance: very good Manitou MRT 3050+ – Year 2018 | 2,770 Operating Hours | 5,000 kg Capacity | New Manitou PSE4400 Platform For sale: a very well-maintained Manitou MRT 3050+ from 2018 with 2,770 operating hours. This powerful rotating telehandler offers a 30-metre lift height and a 5,000 kg lifting capacity, making it the perfect machine for construction, industrial, steel erection and heavy lifting applications. The machine is equipped with air conditioning, radio remote control, and a new genuine Manitou PSE4400 work platform, allowing safe and efficient work at height. Its 360° rotating turret, extendable outriggers and outstanding stability ensure maximum productivity on every job site. The machine is in excellent condition, has been well maintained and is ready for immediate use. Key Features: Year: 2018 2,770 operating hours Lift height: 30 m Lift capacity: 5,000 kg 360° rotating turret Air conditioning Radio remote control New genuine Manitou PSE4400 work platform 5,000 kg winch Extendable outriggers Excellent condition Ready for immediate use A fully equipped rotating telehandler designed for maximum performance and versatility.

Condition: used, mileage: 136,089 km, power: 62 kW (84.30 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2013, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Engine damage. The Volkswagen T5 Transporter 2.0 TDI is a versatile panel van, built in 2013 with a mileage of 136,089 km. It offers an engine output of 62 kW (84 HP) and is equipped with a 2.0-litre diesel engine compliant with Euro 5 emissions standards. The vehicle features a manual transmission and front-wheel drive. With its Ginster Yellow paintwork and 4-cylinder engine configuration, it provides seating for three occupants. The T5 is fitted with two side sliding doors for easy loading and unloading, and it is classified as a commercial vehicle (truck registration). Its environmentally friendly orientation is highlighted by the green environmental badge (emissions sticker) of class 4. Combined fuel consumption is 7.2 l/100 km, making it relatively efficient for this type of vehicle. Despite the engine damage, the T5 represents a solid base for commercial users seeking a functional means of transport. Crsdpjzq Hwzjfx Ahtsf The vehicle is in used condition and has had only one previous owner. Further specifications include a wheelbase of 3,000 mm and a gross vehicle weight of 2,800 kg. Viewings are possible without prior appointment, and a registration service is also available. Sale exclusively to business customers (agriculture, freelancers, small and large enterprises) or for export. Errors and prior sale excepted.

Condition: new, mileage: 1 km, power: 180 kW (244.73 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: steel, total length: 5,700 mm, total width: 2,450 mm, total height: 2,200 mm, Year of construction: 2025, Equipment: air conditioning, crane, differential lock, electric window regulation, power assisted steering, - Autoradio - CD - Diesel - Power windows front - PTO - Side door - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - Radio/cassette player = Remarks = The Mercedes-Benz Atego 1725 A 4x4 Service Truck is an extremely reliable and versatile commercial vehicle, designed to perform in demanding conditions. This truck is suitable for use as a mobile workshop, maintenance vehicle or support vehicle in various difficult-to-reach areas. Key Elements: - ENGINE: Equipped with a powerful 6-cylinder engine delivering 245 hp (180 kW), the Atego 1725 A provides sufficient power for off-road operations and heavy duty work. - DRIVELINE : With permanent four-wheel drive, high ground clearance and robust suspension, this truck arrives on site regardless of the terrain. - OFF ROAD TIRES : With these off-road tires, the Atego 1725 can ensure that you arrive on location without any problems. Thanks to the 4x4 drivetrain, no terrain is too rough. Superstructure : Service Truck A service truck offers a fully equipped mobile workshop with tools such as: - Power supply / Lighting - 24v system connected to the vehicle battery. - 4 ceiling lights 230V (LED) - 2 ceiling lights 24V (LED) (connected to vehicle battery) - 2 sockets 230V / 16A - 2 sockets 400V / 16A and much more, ask our sales for more info! Cedpfx Ahjy Ruczotorf Lubricate / Pump equipment - 4 pneumatic oil pumps equipped with (4) 10M hoses, (4) digital meters on oil dispenser - 1 pneumatic waste oil pump equipped with (1) 10M hose (1) and oil dispenser - 1 pneumatic grease pump equipped with (1) 12M hose (1) grease dispenser - 1 electric water pump (Einhell) with (1) 10M hose and water dispenser - 3 units of ''Silver filler Breathers'' with mesh for water. Coolant, old oil tanks - High pressure washer Karcher (or similar) - Compressor ABAC 3PK 400V/230V with air spray, air hose 10M Tanks: - Water tank capacity 600L MAX. - Diesel tank capacity 1000L MAX. with 24V pump hose is 15M with digital meter for liters - Old oil tank capacity 900L MAX. Tools: - Power generator (Hyundai DHY12000XSET 11.4KvA 400V / 9kw 230V 30L 50Hz 72DB) - 1 portable headlamp – 5M - Barrelwrench type 1 and 2 - Extension cable - 25M - Vise / vice 100MM - Tool box filled 30+ parts - 2 tool chests with drawers, cabinet, and doors with lock. Other accessories: - Mud screens - Work lamp - First aid kit - Water tank 30L for washing hands - Anchor points for securing cargo - Fire extinguisher - Welding equipment 1 welding cable with holder 10M, welding helmet, leather gloves - 500KG electric winch 230V - manual jack The Mercedes-Benz Atego 1725 A 4x4 Service Truck is an excellent choice for professionals in: - Mining: Reliable transportation and support in harsh environments. - Oil and gas industry: Maintenance and repair in remote locations. - Agriculture: Efficient service in difficult areas. - Infrastructure projects: Support of construction and maintenance activities. - Humanitarian missions: deployability for relief efforts in remote or disaster areas. = More information = ...

Condition: new, mileage: 3 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, loading space volume: 36 m³, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - 1 fuel tank - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo Credpfxoy Ry Nyj Ahtef The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day Transmission Transmission: Powershift 3,...

Condition: new, mileage: 4 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = Codpfxsy R Ar Rs Ahtjrf General information Bodywork: Tarpaulin Cab: day Transmission Transmission: Powershift 3, 16 gears,...

Condition: new, mileage: 2 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space volume: 36 m³, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Crjdpfx Ahjy R Ud Estsf Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day Transmission Transmission: Powershift 3, 16 gears,...

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, loading space volume: 36 m³, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - 1 fuel tank - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Codpfsy R Ar Dox Ahtorf Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day Transmission Transmission: Powershift 3,...

Condition: new, mileage: 5 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,550 mm, total height: 2,000 mm, loading space volume: 36 m³, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, traction control, - Autoradio - CD - Power windows front - Spare wheel - Speed-limiting device - Sun visor - Tool box - Transportation = Additional options and accessories = - Air horn - All wheel drive - Aluminium fuel tank - Bluetooth - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Radio/cassette player = Remarks = Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in tough conditions. Its 394 hp engine and 6x6 drive system ensure excellent performance on rough terrain. The flexible cargo body with benches and twist locks makes it perfect for transport and container logistics. This truck offers reliability for challenging off-road missions and operations. Specifications Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for superior traction in off-road environments. - Maximum Gross Vehicle Weight (GVW): 27 tons, suitable for heavy transport. - Axle Configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential lock. - Suspension: Reinforced 3-leaf front suspension (8.0 t) and rear suspension (2 x 13.0 t). - Wheelbase: 5100 mm, for stability and maneuverability. - Engine: 12.8-liter inline-6 OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and VG 3000-3W transfer case. - Tires: 365/85 R 20, optimized for off-road use. Cargo Body Features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Anti-slip checker plate steel (3/5 mm, S235JR) with 10 tie-down rings. - Side Walls: Foldable, removable side walls and tailgate; flatrack configuration possible. - Twist Locks: 4 units for ISO 20 ft containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and Tarpaulin: Steel bows with waterproof PVC tarpaulin (630 g/m², UV-resistant), white RAL color. - Extras: Foldable steps, rubber pads, mud flaps with anti-stone chip coating. Included Accessories: - Lockable toolbox on chassis. - Jerrycan holders for water and fuel. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasted (SA 2½), waxed protection, white RAL color. High Performance: - Versatility: Flexible for personnel, cargo, or container transport. - Durability: Robust steel construction for off-road use. - Efficiency: Quick adjustment of the cargo body without tools. - Reliability: Reinforced suspension and powerful engine. Applications: - Logistics: Cargo transport in remote areas. - Container Transport: ISO 20 ft containers. Additional Options: - Lockable fuel caps, tank protection plate. - LED lighting, first aid kit, warning triangle, 6 kg fire extinguisher. - Built for Tough Conditions: Csdjy Rym Sjpfx Ahtjrf The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rugged off-road environments and demanding logistics operations — the ideal solution for heavy-duty transport challenges. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or = More information = General information Bodywork: Tarpaulin Cab: day Transmission Transmission: Powershift 3, 16 gears,...

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, number of seats: 29, gearing type: mechanical, axle configuration: 4x4, emission class: euro3, color: white, suspension: steel, tire size: 365/80 R 20, wheelbase: 4,160 mm, Year of construction: 2025, Equipment: air conditioning, all wheel drive, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Heater = Remarks = = Additional options and accessories = - Air horn - All wheel drive - Heater - Leaf spring suspension - Parabolic suspension - Passenger seat - PTO - Side door - Speed limiter = Remarks = The Mercedes-Benz Atego 1725 4×4 Passenger Bus is a robust and versatile passenger bus, specially designed for comfortable and safe transport in challenging terrains. Thanks to its four-wheel drive, powerful engine and durable construction, this vehicle is ideal for both urban and remote areas. Specifications Mercedes-Benz Atego 1725 4×4 Passenger Bus: Engine: 6-cylinder diesel engine with 245 hp (180 kW), designed for reliability and performance. Drive: 4×4 drive with excellent off-road capabilities, ideal for difficult roads. Transmission: Manual transmission, tuned for smooth and efficient driving. Number of passengers: 29+1 passenger seats with seat belts. Lighting: Indoor and outdoor lighting for optimal visibility and safety. Suspension: Reinforced suspension for maximum driving comfort, even in rough terrain. Cabin & Passenger Area: - Ergonomic seats with sturdy upholstery and seat belts. - Optional air conditioning and heating for a pleasant climate. - Sturdy body with increased ground clearance for off-road use. - Spacious luggage compartment for luggage and equipment. Advantages: - Off-road capabilities: Designed for challenging environments. - Durability: High quality materials for extended use. - Comfort & Safety: Passenger-friendly design with good driving comfort. - Versatility: Suitable for many applications in urban and rugged areas. Crjdoy Rtylepfx Ahtjf Applications: - Off-road passenger transport: Ideal for mining, oil and gas industries, as well as remote communities. - Tourism and safaris: Perfect for adventure travel in desert, jungle and mountain areas. Accessories: - Additional handles and safety rails. - Storage compartments for luggage and equipment. - Possibility to install communication and navigation systems. - Optional flashing lights and siren for special applications. - Emergency equipment, including first aid kit and fire extinguisher. The Mercedes-Benz Atego 1725 4×4 Passenger Bus is the ideal solution for organizations that need a reliable and robust passenger bus in challenging environments. = More information = Number of doors: 3 Tyre size: 365/80 R 20 Front axle: Max. axle load: 6100 kg; Steering Max. rear axle load: 10000 kg General condition: very good = More information = Transmission: 6 gears, Manual gearbox Year of manufacture: 2025 Tyre size: 365/80 R 20 Brakes: drum brakes Suspension: leaf suspension Number of cylinders: 6 Engine capacity: 7.200 cc GVW: 17.000 kg Dimensions (LxBxH): 800 x 250 x 350 cm

Condition: new, mileage: 3 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, = Additional options and accessories = - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels = Remarks = = Additional options and accessories = - All wheel drive - Leaf spring suspension - Passenger seat - PTO - Radio/cassette player = Remarks = The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is a high-quality refrigerated truck, designed for the safe and efficient transport of temperature-sensitive goods in various terrain conditions. With its powerful 4x4 drive, durable build quality and advanced cooling technology, this vehicle is ideal for both urban distribution and deliveries in remote areas. Specifications Mercedes-Benz Atego 1725 4x4 Refrigerator Truck: - Drive: 4x4 configuration, perfect for difficult-to-reach locations or terrain. - Maximum gross vehicle weight (GVW): 17 tons, suitable for medium to large loads. - Suspension: Robust suspension with high ground clearance for a smooth ride Engine: - Power: 245 hp (180 kW). - Torque: 900 Nm for excellent performance under tough conditions. - Transmission: Mercedes PowerShift automatic gearbox for smooth shifting and efficient fuel consumption. Cooling structure: - Cooling unit: High-quality unit with a range from -20°C to +10°C, depending on the load requirements. - Insulation: Double-walled insulated panels to ensure a constant temperature. - Capacity: Varying between 20 m³ and 30 m³ loading space, depending on the configuration. - Doors: Each door has 3 stainless steel hinges and external locks. Advantages: - Versatile use: Suitable for the transportation of perishable goods such as meat, dairy, fish, vegetables and medicines. - Excellent off-road capabilities: Thanks to the 4x4 drive, this refrigerated truck allows you to make deliveries in difficult-to-reach regions. - Energy efficient: The cooling unit and motor are designed for efficiency, which reduces operating costs. - Reliable temperature control: Optimal conditions for your goods thanks to precise temperature control and high-quality insulation. Applications: The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is ideal for: - City distribution of fresh and frozen products. - Agricultural transport of freshly harvested products to markets. - Logistics operations in remote or difficult to reach areas. Csdpfey R Atbox Ahtorf - Pharmaceutical deliveries requiring strict temperature control. The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck offers an excellent balance between performance, reliability and efficiency, guaranteeing that your goods always arrive in perfect condition. Cool unit brand: Carrier = More information = Cab: day Tail lift: DLP DLP 5003, tail lift, 1500 kg Make of bodywork: Carrier Oasis 250 Cooling unit Wall thickness: 6 mm General condition: very good Cool unit make: Carrier Cargo space outer length: 500 cm Cargo space outer width: 250 cm Cargo space outer height: 200 cm = More information = Year of manufacture: 2024 Number of cylinders: 6 Engine capacity: 7.201 cc GVW: 17.100 kg Tail lift: 1500 kg Rent kmly price currency: EUR Tail lift: Laadklep: DLP DLP 5003, achtersluitklep, 1500 kg

Condition: new, mileage: 2 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, = Additional options and accessories = - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels = Remarks = = Additional options and accessories = - All wheel drive - Leaf spring suspension - Passenger seat - PTO - Radio/cassette player = Remarks = The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is a high-quality refrigerated truck, designed for the safe and efficient transport of temperature-sensitive goods in various terrain conditions. With its powerful 4x4 drive, durable build quality and advanced cooling technology, this vehicle is ideal for both urban distribution and deliveries in remote areas. Specifications Mercedes-Benz Atego 1725 4x4 Refrigerator Truck: - Drive: 4x4 configuration, perfect for difficult-to-reach locations or terrain. - Maximum gross vehicle weight (GVW): 17 tons, suitable for medium to large loads. - Suspension: Robust suspension with high ground clearance for a smooth ride Engine: - Power: 245 hp (180 kW). - Torque: 900 Nm for excellent performance under tough conditions. - Transmission: Mercedes PowerShift automatic gearbox for smooth shifting and efficient fuel consumption. Cooling structure: - Cooling unit: High-quality unit with a range from -20°C to +10°C, depending on the load requirements. - Insulation: Double-walled insulated panels to ensure a constant temperature. - Capacity: Varying between 20 m³ and 30 m³ loading space, depending on the configuration. - Doors: Each door has 3 stainless steel hinges and external locks. Advantages: - Versatile use: Suitable for the transportation of perishable goods such as meat, dairy, fish, vegetables and medicines. - Excellent off-road capabilities: Thanks to the 4x4 drive, this refrigerated truck allows you to make deliveries in difficult-to-reach regions. - Energy efficient: The cooling unit and motor are designed for efficiency, which reduces operating costs. - Reliable temperature control: Optimal conditions for your goods thanks to precise temperature control and high-quality insulation. Applications: The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is ideal for: - City distribution of fresh and frozen products. Crodpfxsy Rt R Ro Ahtsf - Agricultural transport of freshly harvested products to markets. - Logistics operations in remote or difficult to reach areas. - Pharmaceutical deliveries requiring strict temperature control. The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck offers an excellent balance between performance, reliability and efficiency, guaranteeing that your goods always arrive in perfect condition. Cool unit brand: Carrier = More information = Cab: day Tail lift: DLP DLP 5003, tail lift, 1500 kg Make of bodywork: Carrier Oasis 250 Cooling unit Wall thickness: 6 mm General condition: very good Cool unit make: Carrier Cargo space outer length: 500 cm Cargo space outer width: 250 cm Cargo space outer height: 200 cm = More information = Year of manufacture: 2024 Number of cylinders: 6 Engine capacity: 7.201 cc GVW: 17.100 kg Tail lift: 1500 kg Rent kmly price currency: EUR Tail lift: Laadklep: DLP DLP 5003, achtersluitklep, 1500 kg

Condition: new, mileage: 1 km, power: 181 kW (246.09 HP), fuel type: diesel, axle configuration: 4x4, wheelbase: 4,160 mm, fuel: diesel, fuel tank capacity: 210 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 4,890 mm, loading space width: 2,400 mm, loading space height: 1,940 mm, Year of construction: 2024, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, tail-lift, traction control, = Additional options and accessories = Crjdpfx Ahey Rt Ucetof - Autoradio - CD - Diesel - Power windows front - Side door - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels = Remarks = = Additional options and accessories = - All wheel drive - Leaf spring suspension - Passenger seat - PTO - Radio/cassette player = Remarks = The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is a high-quality refrigerated truck, designed for the safe and efficient transport of temperature-sensitive goods in various terrain conditions. With its powerful 4x4 drive, durable build quality and advanced cooling technology, this vehicle is ideal for both urban distribution and deliveries in remote areas. Specifications Mercedes-Benz Atego 1725 4x4 Refrigerator Truck: - Drive: 4x4 configuration, perfect for difficult-to-reach locations or terrain. - Maximum gross vehicle weight (GVW): 17 tons, suitable for medium to large loads. - Suspension: Robust suspension with high ground clearance for a smooth ride Engine: - Power: 245 hp (180 kW). - Torque: 900 Nm for excellent performance under tough conditions. - Transmission: Mercedes PowerShift automatic gearbox for smooth shifting and efficient fuel consumption. Cooling structure: - Cooling unit: High-quality unit with a range from -20°C to +10°C, depending on the load requirements. - Insulation: Double-walled insulated panels to ensure a constant temperature. - Capacity: Varying between 20 m³ and 30 m³ loading space, depending on the configuration. - Doors: Each door has 3 stainless steel hinges and external locks. Advantages: - Versatile use: Suitable for the transportation of perishable goods such as meat, dairy, fish, vegetables and medicines. - Excellent off-road capabilities: Thanks to the 4x4 drive, this refrigerated truck allows you to make deliveries in difficult-to-reach regions. - Energy efficient: The cooling unit and motor are designed for efficiency, which reduces operating costs. - Reliable temperature control: Optimal conditions for your goods thanks to precise temperature control and high-quality insulation. Applications: The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck is ideal for: - City distribution of fresh and frozen products. - Agricultural transport of freshly harvested products to markets. - Logistics operations in remote or difficult to reach areas. - Pharmaceutical deliveries requiring strict temperature control. The Mercedes-Benz Atego 1725 4x4 Refrigerator Truck offers an excellent balance between performance, reliability and efficiency, guaranteeing that your goods always arrive in perfect condition. Cool unit brand: Carrier = More information = Cab: day Tail lift: DLP DLP 5003, tail lift, 1500 kg Make of bodywork: Carrier Oasis 250 Cooling unit Wall thickness: 6 mm General condition: very good Cool unit make: Carrier Cargo space outer length: 500 cm Cargo space outer width: 250 cm Cargo space outer height: 200 cm = More information = Year of manufacture: 2024 Number of cylinders: 6 Engine capacity: 7.201 cc GVW: 17.100 kg Tail lift: 1500 kg Rent kmly price currency: EUR Tail lift: Laadklep: DLP DLP 5003, achtersluitklep, 1500 kg

Condition: new, mileage: 7 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights = Additional options and accessories = - Airbags - Air horn - Air Suspension Seats - Aluminium fuel tank - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - Radio/cassette player - Side door - Side skirts - Sleeper cab = Remarks = Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is a powerful, robust, and versatile tipper truck, specifically designed for heavy-duty transport in construction and mining applications. With its strong engine, high payload capacity, and reliable Meiller tipper body, this vehicle is perfectly suited for moving large volumes of soil, sand, stones, or other bulk materials. Specifications Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper: - Drive: 8x4 configuration for optimal stability and traction. - Maximum GVW: 41 tons, suitable for extremely heavy loads. - Axle Configuration: Dual driven rear axles. - Suspension: Reinforced suspension for intensive use. - Wheelbase: Optimized for maneuverability and stability in heavy-duty applications. - Engine: 12.8-liter inline 6 Euro 3 diesel engine, 394 hp (294 kW), 1900 Nm torque. - Transmission: PowerShift3 automatic with off-road mode for maximum control. - Axle Loads: 2x front axle 7.5T, 2x rear axle 13.4T. - Clutch: Double Disc Clutch. - Tires: 315/80 R 22.5. Meiller Tipper Body: - Classic rear tipper H436, 20 cbm, HARDOX floor. - Type: Rearward tipping body, ideal for bulk transport. - Capacity: 20 m³ loading capacity. - Material: Wear-resistant steel body for enhanced durability. - Hydraulics: Meiller high-performance hydraulic system for efficient unloading. - Safety: Automatic locking system and stabilizer bar for safe operation, even on uneven surfaces. Advantages: - Effortlessly transport large volumes of material with a GVW of 41T. - The engine is engineered for efficiency, even under heavy loads. - Rugged design and high ground clearance for off-road terrain. - Simple and intuitive tipper control from within the cab. Applications: Codpfx Asy Rt Trehtsrf The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is perfectly suited for: - Construction Projects: Transporting soil, sand, gravel, or debris. - Mining Operations: Moving heavy stones and ores. - Infrastructure Works: Supplying materials such as asphalt and building supplies. DIMENSIONS: L. 8282MM | W. 2500MM | H. 3700MM (WEIGHT 16,000KG) Meiller Heritage: Meiller tippers have been manufactured in Germany for over 170 years and are renowned for their reliability and innovation within the construction sector. Proven in Tough Conditions: The Arocs 4140K has been tested in the most demanding construction and mining environments — from deserts to quarries — and consistently delivers outstanding performance. = More information = General information Cab: day Transmission Transmission: Mercedes Powershift 3, 12 gears, Automatic Axle configuration Tyre size: 315/80R22.5 Front axle 1: Steering Front axle 2: Steering Functional Make of bodywork:...

Condition: new, mileage: 6 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, loading space volume: 20 m³, loading space length: 5,800 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, traction control, - Airbag - Autoradio - CD - Power windows front - PTO - Speed-limiting device - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights = Additional options and accessories = - Airbags - Air horn - Air Suspension Seats - Aluminium fuel tank - Differential Lock - Leaf spring suspension - Parabolic suspension - Passenger seat - Radio/cassette player - Side door - Side skirts - Sleeper cab = Remarks = Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is a powerful, robust, and versatile tipper truck, specifically designed for heavy-duty transport in construction and mining applications. With its strong engine, high payload capacity, and reliable Meiller tipper body, this vehicle is perfectly suited for moving large volumes of soil, sand, stones, or other bulk materials. Specifications Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper: - Drive: 8x4 configuration for optimal stability and traction. - Maximum GVW: 41 tons, suitable for extremely heavy loads. - Axle Configuration: Dual driven rear axles. - Suspension: Reinforced suspension for intensive use. - Wheelbase: Optimized for maneuverability and stability in heavy-duty applications. - Engine: 12.8-liter inline 6 Euro 3 diesel engine, 394 hp (294 kW), 1900 Nm torque. - Transmission: PowerShift3 automatic with off-road mode for maximum control. - Axle Loads: 2x front axle 7.5T, 2x rear axle 13.4T. - Clutch: Double Disc Clutch. - Tires: 315/80 R 22.5. Meiller Tipper Body: - Classic rear tipper H436, 20 cbm, HARDOX floor. - Type: Rearward tipping body, ideal for bulk transport. - Capacity: 20 m³ loading capacity. - Material: Wear-resistant steel body for enhanced durability. - Hydraulics: Meiller high-performance hydraulic system for efficient unloading. - Safety: Automatic locking system and stabilizer bar for safe operation, even on uneven surfaces. Advantages: - Effortlessly transport large volumes of material with a GVW of 41T. - The engine is engineered for efficiency, even under heavy loads. - Rugged design and high ground clearance for off-road terrain. - Simple and intuitive tipper control from within the cab. Crodpjy Tmmkofx Ahtsf Applications: The Mercedes-Benz Arocs 4140K 8x4 Meiller Tipper is perfectly suited for: - Construction Projects: Transporting soil, sand, gravel, or debris. - Mining Operations: Moving heavy stones and ores. - Infrastructure Works: Supplying materials such as asphalt and building supplies. DIMENSIONS: L. 8282MM | W. 2500MM | H. 3700MM (WEIGHT 16,000KG) Meiller Heritage: Meiller tippers have been manufactured in Germany for over 170 years and are renowned for their reliability and innovation within the construction sector. Proven in Tough Conditions: The Arocs 4140K has been tested in the most demanding construction and mining environments — from deserts to quarries — and consistently delivers outstanding performance. = More information = General information Cab: day Transmission Transmission: Mercedes Powershift 3, 12 gears, Automatic Axle configuration Tyre size: 315/80R22.5 Front axle 1: Steering Front axle 2: Steering Functional Make of bodywork:...