Used Vertical Band Saw Machine for sale (68,098)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1270 x 508 x 508mm, 20 station tool changer, Table 1321 x 457mm, maximum table load 1800 kgs, 15kW Spindle Motor, Spindle Taper DIN40, spindle speed 40 - 8000rpm, Hurco WINMAX 5 Control, Low Volt Light, Coolant, Swarf Auger Gjdpfo Ai Sdzex Am Ejkd

Condition: ready for operation (used), Year of construction: 1984, Cutting capacity, circular: 340 mm Cutting capacity, flat: 340 x 290 mm Cutting capacity, square: 325 x 325 mm Gkjdpsznvnkofx Am Eed Saw blade dimensions: 600 x 52 x 2.5 mm Drive motor: 380 V, 6 kW Space requirement: 2100 x 2100 x 1470 mm Weight, approx.: 1840 kg

Condition: new, Year of construction: 2026, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 34 mm, total length: 2,350 mm, total width: 1,250 mm, overall weight: 1,250 kg, table height: 600 mm, coolant pump power: 60 W, cutting range round steel at 90°: 400 mm, cutting range square steel at 90°: 400 mm, saw band length: 4,650 mm, saw band width: 1 mm, ROGI SAWING MACHINE TYPE WDS-400 SEMI-AUTOMATIC Saw blade size ----- 4650 x 34 x 1.1 mm Sawing speeds ----- 19/30/50/65/90 m/min. Motor power ----- 4 kW - 400V - 3 phase Weight ----- 1250 kg Cutting capacity ----- 400 mm / 500W x 400H mm INCLUDES Bimetal band saw blade Workpiece stop Saw blade guide with carbide inserts Hydraulic clamp Coolant pump Hydraulic downfeed cylinder Motor protection switch Automatic end stop Gsdpjx N Iawjfx Am Eskd

Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 18kW Spindle Motor, 30 station side arm ATC, DIN40 spindle taper, 10,000rpm spindle, Hurco Winmax 5 control, Godpj Ai Sg Sofx Am Ejkd through spindle coolant.

Condition: used, Year of construction: 2004, power: 16.2 kW (22.03 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 04568 Edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edgebanding thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Connected load of the basic machine 16.2 kW Power supply 400 V / 50 Hz / 3-phase Pre-milling unit Gluing unit Quickmelt End trimming unit with program-controlled switching between straight and bevel trimming Combination trimming unit for flush, bevel and radius trimming Corner rounding unit Profile scraping unit Flat scraping unit Buffing unit for polishing the edges Release agent spraying system Gkodpfx Ajz Rgpcem Esd Additional equipment: Hot air system Schugoma HDL3020 Retrofitted hot air system, year of construction 2015 Power 6 kW Separate control unit Hot air activation of the functional layer of compatible zero-joint edgebanding (laser edgebanding) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1998, cutting diameter 280 mm saw band length . mm cutting width . mm total power requirement . kW weight of the machine ca. 1 t dimensions of the machine ca. . m Gjdpfx Ajucgxzem Eokd

Condition: used, Year of construction: 2004, Horizontal band saw HEMA HTR 600 Year of manufacture: 2004 For various materials (depending on the installed saw blade) Technical data: Wheel diameter: 600 mm Working height: 955 mm Total height: 1800 mm Total width: 2550 mm Total length (conveyor belt): 2820 mm Max. cutting height (distance conveyor belt - saw blade): 140 mm Saw blade length: 5600 mm Saw blade width: 8 to 25 mm Saw blade thickness: 0.65 mm Cutting speed: 1640 m/min Conveyor belt speed: 0.5 to 5 m/min Conveyor belt width: 650 mm Weight approx. 700 kg Gsdpfo Aigk Tsx Am Eskd Dust extraction connections - Cutting point: 100 mm - Deflection point: 100 mm - Conveyor belt extraction connection: 100 mm Motor power - machine: 2.2 kW Motor power - feed: 0.12 kW Voltage: 3 x 400V

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Year of Construction: 2012 Technical Specification: SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Spindle Nose to Table (Min.- Max.) : 120 - 840 mm ATC Tool Change Capacity : 24 Tools ATC Type : ARM CNC Gjdox Ehibspfx Am Eokd Control : Fanuc Oi-MD Additional Details: 12" 4th Axis

Condition: new, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Standard equipment includes: - Horizontal clamping device - Length stop - Automatic shut-off after the end of the cut - Chip removal brush Gedpfxedynpcs Am Eskd - Coolant system - Operating manual

Condition: good (used), Year of construction: 2008, CNC Vertical Machining Center Manufacturer: MIKRON AGIE CHARMILLES, Type: VCE 800 Plus, Year of Manufacture: 2008 Control System: Heidenhain ITNC 530 Godpo Aicz Usfx Am Eekd Travel distances: X 860 mm, Y 560 mm, Z 600 mm Table size: 1000 mm x 500 mm Spindle: SK40 Magazine capacity: 24 tools Chip conveyor and machine documentation available. In good condition.

Condition: good (used), Year of construction: 2014, Traverses X Y Z 533 x 406 x 483mm, A axis 30/110 degrees, C axis 360 degrees, table size 198mm diameter, table load 150kgs, Gjdpfj Ai Sk Sox Am Eokd spindle speed 10,000 rpm, spindle taper BT40, 20 station ATC, Winmax control.

Condition: new, power: 90 kW (122.37 HP), cutting width (max.): 1,100 mm, total height: 4,700 mm, overall weight: 19,000 kg, saw blade length: 10,450 mm, The VTZ PLUS is MEBOR’s exceptionally FAST vertical band sawmill system, designed for high capacity as well as quality-oriented sawing. Its SMART design combines speed, energy efficiency and high recovery of wood. Godporlm N Ujfx Am Eokd

Condition: excellent (used), Year of construction: 2022, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, Gkods Ai Sbmjpfx Am Eed HAAS Control, 30 Station ATC, Coolant, Low Volt light, swarf auger, spindle probe,

Condition: used, Year of construction: 2011, x-travel 0520 mm y-travel 360 mm z-travel 360 mm Control 840 D Siemens tool taper HSK 63 spindle turning speed - stepless 36- 10.500 U/min tool magazin: 2 x 24 Pos. Gkjdpfx As Ai Ubvsm Eed size of pallet 600 x 300 mm rapid traverse 60 m/min feed stepless 0-40000 mm/min total power requirement 37 kW weight of the machine ca. 9 t dimensions of the machine ca. 4 x 5 x 3 m Double spindle machining center with swivable table as a 4th axe. Machine has cooling through spindle with 40 bar.

Condition: good (used), Year of construction: 2011, Haas VF-3YT/50 vertical machining center, manufactured in 2011. Gksdpfxe Ahxqyo Am Eed

Condition: good (used), Year of construction: 2019, Very well-maintained used band saw from Bomar. Type: Workline 610.450 DGH Capacity: 610 x 450 mm Semi-automatic Includes roller conveyors with a manual measuring system. More photos will follow. Gkeds Ah Svgepfx Am Eod

Condition: good (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, FOR SALE 5-Axis Machining Center – DMG MORI DMU 95 monoBLOCK® YEAR 2016 Description: Selling a DMG MORI vertical 5-axis simultaneous machining center (Deckel Maho Pfronten GmbH), year 2015. A versatile, highly rigid, and well-equipped professional machine. Suitable for complex and high-precision machining operations. Can be viewed powered on and in operation on site. Main Features: • Numerical Control: HEIDENHAIN TNC 640 (ERGOline® interface) • Spindle speed max: 20,000 rpm • Hour counters: Power on: 48,878 h | Actual machining: 17,030 h • Machine weight: ~14,000 kg (14 tons) Capabilities & Machining Envelope: Gedpo Af Aiaefx Am Eokd • Travels: X = 950 mm | Y = 850 mm | Z = 650 mm • Max. workpiece dimensions: Ø 1,040 mm x Height 590 mm • Tilting rotary table: Ø 850 x 750 mm (Max. load 1,000 kg) • Tool magazine: 60 positions Equipment & Included Options: • HEIDENHAIN TS 649 infrared workpiece probe • BLUM laser tool measurement system • quickSET 3D geometric control kit • Remote electronic handwheel • Nozzle ring for coolant around the spindle • Safe operating mode: Mode 4 • Automatic chip conveyor & Original transformer • 3D STEP digital model of the machine included (for simulation/CAM) Conditions: • Removal, lifting, and transport are the sole responsibility of the buyer. PRICE €173,000

Condition: excellent (used), Year of construction: 2011, Control system: Siemens Sinumerik 828D Travel ranges X/Y/Z: 1020 x 560 x 510 mm Spindle speed: 8000 min-1 Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Geds Ai H N Ujpfx Am Eokd

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT Gkjdoz Ehxyepfx Am Esd OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: excellent (used), Year of construction: 2020, Brother C-00 control system Travel ranges X/Y/Z: 650 x 400 x 435 mm Gkodpfx Amo Ai H Nuj Esd Dual pallet changer, 800 x 400 mm Spindle speed: 16,000 rpm Tool magazine for 40 tools, BT 30 Coolant pressure: 70 bar 3D measuring probe, OMP 40 Electronic handwheel Chip conveyor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Gkodpfewlbxljx Am Eed Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 2020, Vertical CNC machining center Manufacturer: Homag Type: Optimat BHX055 Year of manufacture: 2020 Gkodpfxs Aiubhj Am Eod Technical specifications Workpiece length: 200 - 3,050 mm Workpiece width: 70 - 850 mm Workpiece thickness: 12 - 60 mm Milling spindle: 1 Main spindle power: 5 kW Max. speed: 18,000-24,000 rpm (depending on configuration) Tool holder: HSK-F63 or ETP25 Tool changer: 4-position magazine Vertical drilling spindles: 13 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Dado saw: X-axis Control system: Homag powerTouch / Power Control PC 86 Software: WOODWOP 7.x Total connected load: 11.5 kW Compressed air requirement: 7 bar Machine weight: approx. 1,580 kg Installation dimensions (L x W x H): approx. 2,950 x 1,984 x 1,895 mm CE marking Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, power: 37 kW (50.31 HP), Mebor HTZ 1200 SUPER PROFI PLUS Gedpj Akdapjfx Am Eekd • Production year: 2011 • Main motor power: 37 kW • Maximum log length: 6 m • Maximum log diameter: 1300 mm • automatic board guiding device • Fully automatic with automatic boards removing • 5 hydraulic clamps • 5 hydraulic rollers (three driven and two non-driven). • 2 log turning devices • 5 hydraulic corners • belt conveyor for boards The machine is for sale in combination with: • Motorised log deck for logs • Roller conveyor with left-right sorting; length 6 m

Condition: ready for operation (used), overall weight: 5,000 kg, Bochud band saw with tensioning carriage. Gsdpfx Aj Airucjm Ejkd

Condition: good (used), Year of construction: 2016, Traverses X Y Z; 600 x 450 x 450mm, B axis -120/+ 45 degrees, C axis 0.001 degrees, pallet size 280mm x 280mm, maximum spindle taper HSK A63, 120 station ATC, spindle speed 20,000rpm, Heidenhain TNC530 control, Geds Air H Sspfx Am Ejkd through spindle coolant,