Used Vollmer Chd 250 for sale (110)

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Iijdpfxewp Ebls An Nef Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Iodpfx Aozf Nbxon Nsif

Condition: used, Year of construction: 2014, Suitable for the automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure Integrated loading system and tool magazine Automatic machining of up to 12 HSK 63 tools Program for erosion across the tool center at the cutting edge and for free erosion Hardware and software for DNC service Gripper fingers for workpiece automation SK40/HSK63-A,E/HSK63-B,F Adaptation to the A-axis on HSK63-A,E including 25 mm diameter test mandrel (HSK63 A,E system) Grinding mist extraction N 181 Cooling unit for dielectric fluid Automatic fire extinguishing system Measuring probes Machine lamp Automatic central lubrication Cutter outside diameter: Max. 250 mm Cutting length: Max. 260 mm Shank tool diameter: 10-250 mm Tool weight: Max. 20 kg traverse: X-axis 275 mm Y-axis travel: 300 mm Iiedpfjzguflox An Njf W-axis travel: 200 mm Rotation range A-axis: 360 ° tool holder: ISO 50 E-axis swivel range: 120 ° Dimensions machine: W x D x H = 2535 x 2200 x 2280 mm Weight: about 4500 kg Connected load: 4.5 kW (400 V / 50Hz) colour: telegrey RAL 7045/7047

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: VRBSI, Manual straightening and leveling center for straightening and tensioning of bandsaw blades. Manual roller device. Ijdpfsyizflsx An Neif

Condition: reconditioned (used), functionality: fully functional, Refurbished sharpening machine for carbide-tipped circular saw blades. Blade diameter up to 600 mm. Hydraulically controlled. Ijdpfxjzmhd Uo An Neif Equipped with a cooling system, pump, and tank.

Condition: used, Year of construction: 1992, Suitable for automatic, double-sided tooth grinding of carbide-tipped circular saw blades. Accessories: Wet grinding attachment, Motorized rake angle adjustment, 2 grinding wheel holders, 1 mounting bolt. Circular saw blade outer diameter: 80 to 1270 mm Circular saw drill diameter: 10 - 220 mm sheet thickness: up to 14 mm Tooth pitch: 6-120 mm Grinding path: max. 16 mm Cross angle : -15° to +40° Tangential free angle: 0 to 5° Grinding speed: 0.5 to 6 mm/s grinding wheel diameter: 125 mm Iodozguvwspfx An Njif Connected load approx.: 3,6 kW (400 V / 50 Hz) Weight approx: 1300 kg colour: green RAL 6011

Condition: used, Vollmer Junior B automatic band saw blade sharpener for sharpening band saw blades. Iodpjzrx Hwefx An Nsif Technical data: - Technical specifications: On request

Condition: excellent (used), overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, CANA E blade sharpening machine in very good working condition with centering cone // grinding wheels Iiodpozqtzyofx An Nof transport and delivery possible

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 Iiodeycckcopfx An Nef workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, Year of construction: 2001, Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure, Mist extractor Probe, Machine lamp, Automatic central lubrication, Coolant system dielectric fluid Fire extinguishing system Measuring mandrel Alphanumeric keyboard cutter outer diameter max: 250 mm cutting length max.: 200 mm shank tool diameter: 10 - 250 mm cutting length: 200 mm Outside diameter of disc-shaped tools max.: 250 mm tool weight max.: 20 kg X-axis travel: 220 mm Y-axis travel: 300 mm W axis travel: 200 mm A-axis rotation range: 60 ° A-axis taper: ISO 40 E-axis swivel range: 120 ° number of revolutions: 80 - 2000 rpm. Dimensions L x W x H: 2235x2630x2130mm Iijdpfx Anjyzm Iwo Nsf mass: approx. 4500 kg Connected load approx.: 400V / 50Hz / 4.5KW colour: turquoise RAL 5021/grey RAL 9002

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for circular saws with carbide inserts. Technically inspected. Technical data in the PDF. Iijdpfx Aszl Snuen Nef

Condition: excellent (used), Year of construction: 1993, Vollmer CBF 40 H surface grinding machine. Iijdpozn Hawjfx An Nef

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, Iodpfewtmg Dex An Neif automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: used, Year of construction: 1994, Suitable for simultaneous, automatic grinding of both tooth flanks on carbide-tipped circular saw blades. Accessories: Iodpfx Anozgucdo Neif Motorized rake angle adjustment, Coolant system, Automatic central lubrication, Machine light, 2 grinding wheel holders, 1 sawblade mounting bolt. sheet thickness: up to 8 mm Tooth pitch: 6 to 120 mm rake angle: - 15° to + 25° Tangential free angle: 0° to 6° Radial free angle: - 4° to +6° Connection value: ca. 1,1 kW (400 V / 50 Hz) Weight: about 1150 kg Grinding wheel diameter: Max. 125 mm Bore diameter: 32 mm Dimensions L x W x H: 1340 x 1400 x 2000 mm colour: green Circular saw outer diameter: 80 to 460 mm

Condition: used, Year of construction: 1978, functionality: fully functional, VOLLMER CANA-E and VOLLMER FSM sharpening machines: 1- CANA-E 1978 €4,200 Isdewgb Uvjpfx An Njif 3- CANA-E 1961 €3,200 4- CANA-E 1970 €3,200 6- CANA-E 1965 €3,200 7- FSM 1970 €2,500 8- FSM 1962 €2,200

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Iedpfx Aew S I Dgon Njif Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, Automatic sharpening machine Vollmer, model CHC 21 H; minimum and maximum width of bandsaws: 65–200 mm, tooth pitch: 12–80 mm, minimum tooth height: 5 mm, set per side from 0.3 to 1.5 mm, power: 0.55 kW, estimated machine weight: 550 kg, year: 1981, serial no. 364 Iedpfxoy Swlue An Nsif

Condition: used, Year of construction: 2002, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Iedpfx Ajylby Ion Nsif Tailstock. Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 995, Automatic grinding machine, Vollmer Type AT, for band saw blades. The machine underwent a complete overhaul recently and is in perfect working order. Iijdpezc Hyzjfx An Njf

Condition: good (used), Year of construction: 1993, Vollmer CABG Iiodpfxezhi Sve An Nef Gear grinding machine

Condition: good (used), Year of construction: 1989, overall weight: 1,050 kg, tooth pitch: 120 mm, total width: 1,850 mm, total length: 1,550 mm, total height: 1,800 mm, saw blade diameter: 800 mm, grinding wheel diameter: 175 mm, input voltage: 380 V, type of input current: three-phase, saw blade bore: 10 mm, saw blade width: 16 mm, input frequency: 50 Hz, We offer this good Vollmer Finimat beta sharpening machine, year of construction 1989. Use of one grinding head in combination with two diamond wheels for face and top. Triple chip tooth configuration can be ground in one revolution of sawblade. Saw blade diameter: 100-800 mm Bore size minimum: 10 mm Tooth pitch: 8-120 mm Blade thickness maximum: 16 mm Rake angle range: -20 to +30 degrees Top clearance angle range: +5 to +25 degrees Bevel angle (face) range: 0 to +15 degrees Bevel angle (top) range: 0 to +45 degrees Tooth height differential range: 0 to 1 mm Grinding wheel outer diameter options: 175 or 125 mm Grinding wheel bore diameter: 50.8 mm Maximum circumferential speed: 34 m/s Minimum circumferential speed: 25 m/s Voltage: 380 V Phase: 3 Frequency: 50 Hz Total connected load: 4.6 kW Machine width: 1850 mm Machine depth: 1550 mm Machine height: 1800 mm Net weight: 1050 kg Iedpjx Saw Tjfx An Noif Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Automatic carbide saw grinder VOLLMER model CHC 22 H Isdpfeznr R Isx An Njif

Condition: ready for operation (used), Magnetic knife sharpening machine with a maximum sharpening length of 3.2 meters. Magnetic holder. Iisdpfxozh Rbfs An Nof In perfect condition. The machine will be located in the Görlitz area until the end of August.

Condition: used, Vollmer AT Setting Machine for frame saws, offered as parts donor, 2 units available Iodpfxoy Db R So An Noif Location: Germany, near Lake Chiemsee

Condition: excellent (used), Year of construction: 1997, Vollmer CAL 300 Isdpsy Ryg Esfx An Noif