Used Voortman for sale (23)

Condition: ready for operation (used), Voortman VB1250 lintzaag dop: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen van de lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale booreenheden 1 verticale booreenheid Elke unit heeft een automatische gereedschapswisselaar met 5 posities. spindel: SK40 (koeling via de spindel) Boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm schroefdraad tappen: M8/M24 Inclusief meting van de profielhoogte middelpuntmarkering inbegrepen nummeringseenheid inbegrepen 18 meter aan invoerrollenbanen 6 dwarsaanvoerbanden van 4 meter lengte 16 meter aan afvoerrollenbanen maximale breedte: 1050 mm capaciteit: 400 kg/m³ maximaal positioneringsgewicht: 9 ton Rollentoevoer meetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4 kW - 160 bar Hodpswlkwwsfx Ag Iji

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) Hsdpfxsym Nf Io Ag Ioi ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers)

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-240014, This Voortman VB1050 band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,000 mm. This CNC-controlled Voortman VB 1050 band saw is equipped with a left/right mitre adjustment, a length measuring carriage and roller conveyors in the infeed and outfeed area for material transport. Working areas: With a 90° saw cut, the working area is 500 mm x 1,130 mm With a +/- 45° saw cut, the working area is 500 mm x 725 mm With a +/- 60° saw cut, the sawing area is 500 mm x 470 mm. Equipped with a band saw blade measuring 9,550 x 54 x 1.6 mm, the band saw enables precise cuts. The machine weighs around 8,500 kg without accessories. Hedor Hrrlepfx Ag Iji A Vacon 110 CNC control system is used to program the Voortman VB1050. An outstanding feature of the Voortman VB series is the movable saw table, where the saw blade and cutting area move synchronously. This ensures that the saw blade never cuts the table and enables stepless rotation for precise cuts. For miter cuts, the table automatically lowers to allow free rotation to the next angle.

Year of construction: 2016, condition: used, functionality: fully functional, - Carrier size: 1000 mm Hsdpfsyh Apaex Ag Iei - Infeed roller conveyor: 16 m - Outfeed roller conveyor: 14 m - Extension option available

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Hsdpfx Agsxp Rb Is Ioi

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, table load: 7,500 kg, This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. • Workpiece size • Min./max. panel length: 850 – 6,100 mm • Min./max. panel width: 200 – 2,050 mm • Min./max. panel thickness: 6 – 75 mm • Drilling unit: VD40 • Mounting: SK 40 • Axis speed: 0 – 2,500 rpm (continuously variable, servo motor) • Drill diameter: 5 – 40 mm • Threading: M6 – M30 • Countersinking: Yes • Punch marking option: Yes • Layout marking option (optional): Yes • Automatic tool changer: 2 x VTC 5/40 (2 x 5 positions) • Lubrication/cooling: Internal cooling, air/oil • Hydraulic mounting: Yes • Rated load: 30 kW • Feeding and positioning: Synchronously driven servo motors, servo converter • Cutting – Plasma (Smart Focus 300) • Min./max. thickness: 3 – 80 mm • Max. piercing capacity: 40 mm • Virtually slag-free cutting: up to 35 mm • Marking: Yes, with the same consumables • Gases: • Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free) • Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free) • Marking gas: Argon; for >200 A, nitrogen • Automatic gas console: Yes • Automatic height adjustment: Yes • Ignition: Automatic • Cutting speed (mild steel): • 6 mm: approx. 3,700 mm/min @ 90 A • 12 mm: approx. 3,600 mm/min @ 200 A • 25 mm: approx. 1,600 mm/min @ 300 A • 40 mm: approx. 720 mm/min @ 300 A • 50 mm: approx. 400 mm/min @ 300 A • 80 mm: approx. 100 mm/min @ 300 A • Cutting – Oxy-fuel (oxygen cutting unit) • Nozzle type: Nozzle-mix • Automatic height adjustment: Yes Hodpfx Agox D N Aae Isi • Gas supply: Magnetic valve with non-return valve • Fuel gas: Propane (optional: Acetylene) • Cutting gas: O2 • Max. thickness: 75 mm • General/installation • Working direction: Left to right • Working height: 760 mm (+/- 25 mm) • Ambient temperature: -10°C to +35°C, max. 95% relative humidity • Voltage regulator: Not included • Current transformer: Not included Additional equipment • Kjellberg Smart Focus 300 plasma source (included) • Donaldson DFPR06 extraction system (included; last filter change January 2025)

Condition: good (used), Year of construction: 2012, In good technical condition and fully functional. Year of manufacture 2012. Table size 6x2m + overlaps in both axes of the order of 50 mm. Plasma source Kjellberg HiFocus 280i. Extraction and filtering fully automatic TEKA system, Käser SM9 compressor. Hjdpfx Aex Ttmkjg Isi Autogenous option YES, separate burner part of the machine.

Condition: ready for operation (used), functionality: fully functional, Automatic punching/shearing system CNC V550-4 from Voortman Automatisering BV, including custom rack with cassettes and a numbering device. Suitable for various punching and shearing operations. Due to high demand during this period, our response time may be slightly longer than usual. We apologize for any inconvenience. We only respond to personal messages on Marktplaats. Hedpex Tr Uaefx Ag Iji Unreasonable offers will not be considered. Visits are not welcome and can only take place by appointment. All listed prices are exclusive of VAT. No rights can be derived from this advertisement or from any related communication. The offered materials are circular in nature and may be classified as used, lightly used, or second-hand. As such, signs of use may be present and quantities, availability, and specifications may vary. We strive to present information as accurately and up-to-date as possible, but despite our care, price, type, or content errors may occur. We reserve the right to correct these.

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction). Hjdpfx Aetp Dhpog Iji  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. Hodpov U Ea Hjfx Ag Iei 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material Hedpfx Ajq Hu H Rsg Iei * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Hedpfslff H Eox Ag Ioi Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Year of construction: 2012, condition: excellent (used), 3 Spindle. 21 Metres of In‐feed rollers. 21 Metres of Out‐Feed Rollers. Hodpfxeh Rrxpo Ag Ioi 1.25 metres Sections. Roller Feed measuring. Cross Transfers.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Hedpsvpafysfx Ag Iji Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) Hjdjvpalaopfx Ag Iei ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Hedewphgdjpfx Ag Iji Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: excellent (used), Year of construction: 2009, Year 2009 VOORTMAN V600 CNC SINGLE SPINDLE DRILLING MACHINE with 5 station automatic tool changer. 18 metres length, drilling capability 16.3 metres. Profile Capacity 35mm -1050mm. Hodpfew D Uqfjx Ag Iji Drill capacity 8mm-40mm.

Condition: excellent (used), Year of construction: 2008, Voortman V613 / VB750 CNC Drilling / Sawing Line – Year 2008 Hodpev U Ebwefx Ag Ioi Rotating Spindle. 19 metres In-Feed. 12.5 metres Out-Feed. Roller Feed. In-Feed Cross Transfers. Out-Feed Cross Transfers. 750mm Section Capacity.

Year of construction: 2009, condition: good (used), VSB2500 Shot blaster (with 6 heavy duty turbines, brush and blow-off unit and an automatic exhaust plant) Hodpfeq Hf T Nex Ag Iei

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) Hjdpfx Ageq Hgg Uo Ioi ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: reconditioned (used), Year of construction: 2007, Operating range VB750 Min. / max. height 10 – 450 mm Min. / max. width 50 – 750 mm Sawing machine Capacity (h x w) 0° 450 x 750 mm Capacity (h x w) +/- 15° 450 x 700 mm Capacity (h x w) +/- 30° 450 x 620 mm Capacity (h x w) +/- 45° 450 x 480 mm Hjdpfxjw Nyu So Ag Iji Capacity (h x w) +/- 60° 450 x 300 mm

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm Hodpfx Agewlkw Do Iji breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: good (used), Year of construction: 2000, Used punching and cutting line from Voortman | CNC FLAT BAR PUNCH & SHEAR LINE Hodpfxsv Rhabs Ag Iei Capacity: flat 500 x 22mm square 150 x 150 x 15 mm Including numerator Video available on request