Used Voest for sale (30)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Spindle bore: 42 mm Swing over bed: 330 mm Multifix tool holder Gedpfeykahzsx Abroin Tailstock with MK3 taper Speed: 1-4500 rpm

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz Godpoykca Hsfx Abrjin - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: good (used), Subject to differential taxation according to §25a of the VAT Act. You will receive a proper invoice, however, VAT will not be shown separately. Internal item no.: 26010 You are welcome to inspect the machine under power in our heated warehouse of over 500 m². Leadscrew and feedshaft lathe Giodpeyg Dtgjfx Abron Voest Alpine DA180 + Coolant system + Röhm 200 four-jaw chuck + Chuck guard (with switch) + Multifix "B" Motor: 380 Volt / 5.5 kW Speed: 44 - 2,000 rpm Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Dimensions (LxWxH): 220 x 120 x 160 cm Weight: approx. 1,200 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 1983, Margin scheme taxed according to §25a German VAT Act. You will receive a proper invoice; however, VAT will not be shown separately. Internal article no.: 26012 You are welcome to inspect the machine under power on over 500m² of heated storage area. Gisdpfx Abeyg Dl Ajron Leadscrew and feed shaft lathe Voest Alpine DA180 Max. swing over bed: 380mm Distance between centers: 800mm Spindle bore: 52mm Tailstock: MT4 Multifix "B" basic holder Chuck guard (with switch) Röhm 3-jaw chuck 200mm Dimensions (LxWxH): 250 x 140 x 140cm Weight: approx. 1200kg The machine comes from a training facility and is in well-maintained condition.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 80 mm, turning length: 1,500 mm, turning diameter: 300 mm, center height: 180 mm, bed width: 485 mm, total length: 3,700 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 4,000 kg, For sale: VÖEST-ALPINE lathe in operational condition. An external hydraulic unit is included in the offer. The machine functioned flawlessly until it was removed from service. Loading by arrangement is possible. Year of manufacture: approx. 1980. Gijdpjykb Iisfx Abrjn

Condition: good (used), Technical data for pallet rack beam: Racking system: Voest Alpine Type: Megastar GS Included in delivery: 01x pallet rack beam, used Material finish: hot-dip galvanized CS profile: 100 x 50 x 10 mm Hook bracket: 4 HK (hooks) Clear span: approx. 2,700 mm 02x locking pins, used Design: completely galvanized For securing the cross beams Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Giedpfx Absxb Dqgsren This item is only offered for collection. If transport or shipment of this item is required, this will incur additional costs, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Gijdeig H Hwepfx Abrsn Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, turning diameter: 330 mm, center width: 650 mm, 3-jaw chuck tool holder device Gijdpjwtx A Dsfx Abren tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1989, Vertical crushing plant Voest Alpine ZS 100 Basic year of construction 1989 (machine/rotor completely overhauled) Machine number 89 914 04 incl. drive motor 145 KW Gisdju U Ukiopfx Abron

Year of construction: 1983, condition: ready for operation (used), Center height: 180mm, center width: 800mm, turning diameter over bed/face slide: 380mm/200mm, spindle bore: 52mm, speed: 1500rpm, bed width: 330mm, quill stroke: 180mm, quill holder: MK4, machine dimensions X/Y/Z: approx. 2000mm/850mm/1450mm, weight: approx. 1050kg. On-site inspection is possible. Gijdpfxov Amp Sj Abron

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Godpfx Ajwxfaaebrein

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Gsdpfx Aexn Ty Rjbroin Bed guides in very good condition!

Condition: used, Year of construction: 1992, Voest-Alpine DA210/2 - Universal Lathe Distance between centers: 2000 mm Swing diameter: 420 mm Spindle bore: 52 mm - 3-axis digital readout - 4-jaw chuck Ø 250 mm - Multifix quick-change tool post - Coolant system - Work area lighting - Chip guard rear wall - Year of manufacture: 1992 Optional accessories: - Fixed steady rest (€650 excluding VAT) Technical Data - Center height over flat guideway: 210 mm - Center height from floor: 1090 mm - Bed width: 330 mm Main spindle: - Spindle nose according to DIN 55027: Size 6 - Spindle bore diameter: 52 mm - Front bearing diameter: 83 mm - Internal taper: Metric 57 - Number of speed steps: 12 - Speed range: 33 - 1500 rpm - Max. torque: 900 Nm Tailstock: - Tailstock quill diameter: 65 mm - Morse taper: MT 4 Slide: - Leadscrew pitch: 6 mm - Tool shank cross section (HxW): 20 x 20 mm Working areas: - Swing over bed: 435 mm - Turning diameter over cross slide: 245 mm - Cross slide travel: 330 mm - Top slide travel: 130 mm - Tailstock quill travel: 120 mm Permissible workpiece weight: - Between centers: 500 daN - Unsupported in chuck: 150 daN Feeds: - Longitudinal feeds: 0.072 - 4.038 mm/rev - Cross feeds: 0.036 - 2.019 mm/rev - Metric threads: 0.05 - 28 mm - Inch threads: 56 - 1 TPI - Module threads: Mod 0.25 - 14 Gedpoyc Sqrsfx Abrein - D.P. threads: 112 - 2 TPI Electric drive: - Motor power: 5.5 kW - Rated motor speed: 1500 rpm Dimensions: - Machine dimensions (WxHxD): 3250 x 1700 x 1100 mm - Weight: approx. 1500 kg

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Giodpfx Aoyah Rvebrsn Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: used, functionality: fully functional, Sturdy feed hopper Working area: 800 x 2,200 mm Electric motor, gearbox, eccentric reduction gear Gisdou Dhncspfx Abron on a sturdy base frame

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 32 mm, turning diameter: 320 mm, center height: 160 mm, turning length: 650 mm, three-jaw chuck diameter: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See pictures Manufacturer: Voest Alpine Model: DA-160 Centre height: approx. 160 mm Centre width: approx. 650 mm Turning diameter over bed: approx. 320 mm Turning diameter over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock holder: MK3 Gijdpjwq Ehbjfx Abren Accessories included: Four-jaw chuck Ø 160 mm, 6x steel holders, 4x pairs of turning jaws External dimensions of machine: approx. 150x90x180 cm (LxWxH) The machine can be inspected and tested at our premises. Loading option: with stapler or crane Shipping costs on request (by postcode) You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Errors in technical data and prior sale reserved.

Condition: used, functionality: fully functional, Year of construction: 1965, machine/vehicle number: Type: BT10x3000; Fab. Nr. MBO-559, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, overall weight: 11,500 kg, cutting length (max.): 3,000 mm, Guillotine shears, guillotine shears, VOEST BT 10 x 3000 Year of manufacture 1965 Cutting thickness 10 mm Cutting length 3000 mm Power 25 HP Weight 11.5 tons Gedpsv Igipofx Abrjin Functional, on-site inspection and testing possible

Condition: good (used), Year of construction: 1989, Lathe is in good condition, 1 meter between centers, 210 mm center height. Original paint, little used! Multifix B, various holders included. + 1 box with turning tools. Giodpfx Aeygbcrsbron

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 1,000 mm, turning diameter: 500 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 37 W, torque: 1,450 Nm, chuck outer diameter: 315 mm, Equipment: documentation/manual, rotational speed infinitely variable, Voest Alpine Steinel Lathe WNC 500 S x 1000 Turning diameter: 500 mm Turning length: 1000 mm Control system: Sinumerik 810 T-GA 2 2-speed gearbox i = 4 Power: 37 kW at 100% duty cycle Max. turning torque: 1450 Nm Manual tailstock with clamping and coupling Max. speed: 2500 rpm Electronic handwheel For milling operations: hydraulically swiveling servomotor with 720 Nm and max. 18.5 rpm 12-position disc turret with live tooling, max. 3000 rpm at 4 kW Tool holder: VDI 40 Numerous tool holders VDI 40 for internal and external machining as well as live tooling, Giedpfx Aoydfy Njbren including some tools – e.g., internal turning tools – otherwise without tools!

Condition: excellent (used), For sale: the Austrian-made Voest DA160 lathe shown in the photos. The machine is in very good condition, as indicated by the quiet spindle operation and the absence of play in the mechanisms. The machine was purchased from a training workshop. Overall condition is rated as very good. Loading of the machine is provided. Price is net. Spindle speed: 30–2500 rpm Two-speed motor Motor power: 2/2.4 kW 16 spindle speeds Rohm 160 chuck Internal, external, and split jaws Spindle bore: 36 mm Tailstock quill: MK3 Quill travel: 100 mm Turning diameter: 320 mm Turning diameter over carriage: 190 mm Turning length: 650 mm Dimensions: 85x150x140 + 15 (pallet) Giodpfx Absx Nxulerjn Weight: 700 kg

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Gjdpfsma Snxex Abrein

Condition: good (used), VOEST DA 360 – Lead and Feed Screw Lathe -Heidenhain digital readout -Center height over bed: 400 mm -Swing diameter over bed: 800 mm -Swing diameter over cross slide: 500 mm Gisdpfxsx Auldo Abron -Turning length: 1,000 mm -Spindle bore approx. 87 mm -Speed range: 14 – 1,000 rpm / 18 speeds -Automatic longitudinal and cross feeds -Automatic Z-axis infeed -Tailstock Morse taper 5 -3-jaw wedge-type chuck 250 mm -Multifix base holder with insert -Work lamp -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3,500 kg Subject to errors or input mistakes.

Condition: refurbished (used), Year of construction: 1981, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 420 mm, center height: 210 mm, turning length: 1,000 mm, total length: 2,300 mm, total width: 1,300 mm, total height: 1,700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 33 rpm, quill mount: MK 4, Machine Equipment / Highlights Heidenhain ND 780 digital position display Röhm 3-jaw chuck, Ø 250 mm Multifix quick-change tool holder Coolant system for efficient machining Chuck guard for increased safety Gsdpfx Aoxqpwkobrein Chip guard rear wall for a clean working environment Year of manufacture: 1981

Condition: good (used), Vöest-Alpine Jaw Crusher . Type: STE 4025 K . Mach. No.: 70310010 . 400 x 250 mm. . With Electrical motor. Gsdpfxemnq Dqe Abrjin

Condition: used, functionality: unexamined, Year of construction: 1979, Various used housing parts for SBM-Vöest 10/6/4 Export Gsdpfx Ajxv U S Robrjin