Used Waste Water Pump for sale (17,534)

Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps Bedpoxv Affsfx Anpoww These units are in full working condition and ready for immediate release. The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Other features: The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: used, This listing is for the Grant Sub 14 Water Bath The unit is in full working condition and is ready for immediate use Universal 14 litre water bath – high quality and excellent temperature stability for a wide range of routine applications. 14 Litre Capacity Temperature Range: Ambient +5ºC to 99ºC Stability: ±0.2ºC Wide range of options to suit different applications Robust, durable design with electronic control Stainless steel tank in a robust outer case – tough and durable in demanding environments 2-digit LED display for clear temperature indication Independent over-temperature cut-out protects users and workplace if bath is accidentally run without liquid Digital control system – ensures reproducibility of set temperature and accurate repetition of sensitive procedures Safety feature: Over-temperature cut-out protects samples in the event of primary control failure Dimensions: 45 cm (D) x 33 cm (W) x 26 cm (H) Specifications Capacity: 14 litres Temperature Range: Ambient +5°C to 99°C Temperature Stability: ±0.2°C Construction: Stainless steel tank within a robust outer case Display: 2-digit LED for clear temperature indication Bsdpfx Asxv Ayponpjww Control System: Digital control for reproducibility Safety Features: Independent over-temperature cut-out Dimensions: 45 cm (D) x 33 cm (W) x 26 cm (H)This listing is for the Spectrum Labs KrosFlo Automatic Backpressure Valve

Condition: used, This listing is for the KNF Neuberger Diaphram Pump PM16209-122 The unit is in full working condition and is ready for immediate release Description: A compact and corrosion-resistant pump suitable for general laboratory use. Technical Features: 100% oil-free transfer Pure transferring, evacuation, and compression of gases Version for slightly aggressive or corrosive gases and vapours Bwedpoxv A Rbofx Anpew Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10⁻³ mbar x l/s (not tested in serial production) Series N 022 diaphragm pumps are single-head, dry-running devices designed for a wide range of laboratory applications

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Bedpfxexwc Euo Anpjww Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: used, This listing is for a Biotek Instruments Vacuum pump 2 The unit is in full working condition and is ready for immediate release. BioTek Instruments GAST Vacuum Pump 7103034 Overview The BioTek Instruments GAST Vacuum Pump 7103034 is a high-performance, oil-less rocking piston compressor and vacuum pump designed for use with a variety of microplate washers, including the EL 406, 405 TS, 405 LS, and ELx405. Key Features Standard Vacuum Pump: Ideal for a wide range of applications. Oil-less Rocking Piston Compressor: Ensures outstanding performance and durability. Flexibility and Durability: Suitable for various laboratory settings. Easy to Retrofit: Simple installation and integration with existing systems. Low Exhaust Temperatures: Reduces the risk of overheating and extends the pump's lifespan. Longer Life Span: Built to last, minimizing the need for frequent replacements. Voltage: Operates at 115-230V. Max Vacuum: 26 in -hg. Sound Level: Less than 65 db(A). Product Information Compressor Type: Standard Vacuum Pump Port Size: 1/4 in NPT End Connections: NPT Phase: Single Maximum RPM: 1725 RPM; 1425 RPM Minimum Working Temperature: 5°C Maximum Working Temperature: 40°C Standards: CE; UL For Use With: 405 ls, 405 touch, el406, elx405 microplate washers Bwedpfx Aoxwc I Nsnpew Voltage: 115 - 230V Sound Level: Less than 65 db(A) Max Vacuum: 26 in -hg Specifications Weight Metric: 11.34 kg Imperial: 25 lb Dimensions Metric: 35.56 cm x 25.4 cm x 33.02 cm Imperial: 14 in x 10 in x 13 in Harmonized Code: 84141000 Harmonized Code Details: Vacuum pumps; liquid ring vacuum pumps and other rotary positive displacement pumps Availability eBay: This vacuum pump is listed on eBay with free shipping for many products. Sellers typically respond within 24 hours to assist with any inquiries or specific configurations.

Condition: used, mileage: 230,000 km, power: 272 kW (369.82 HP), first registration: 03/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), parking heater, Manufacturer Scania Model P370 6x4 Liebherr THP140H 24 M4 XH Year 2016 Condition Good Serial Number YS2P6X40005406746 Ref. nr. 1418019 Reg. date: 23-03-2016 Engine: DC13 Bodpexwg Rzsfx Anpjww Hk: 370 Km: 230000 Gearbox: Opticruise (GRS905) Eurotype: 6 Diesel tank: 1 Tank liter: 350 L Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CP19L Navigation: ? Radio: 1 Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/80R22,5 Cover% left 60% Front suspension: Springs Suspension rear: Air Wheelbase: 4300 mm Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 22100 Kg Load capacity 3900 Kg Manufacturer: Liebherr THP140H 24 M4 XH Capacity: 140 m3

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Bwodpfx Anjxl Aaujpow

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. Bwsdpfsxxz I Rjx Anpjw The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, This listing is for a Charles Austen Pumps Dymax 30 Vacuum Pump. The unit is in full working condition and is ready for immediate release. The Dymax series includes diaphragm pumps that are engineered to deliver a clean, oil-free vacuum or pressure source, making them ideal for a range of applications from laboratories to industrial settings. Key Specifications: Dimensions: Approximately 210 x 151 x 125 mm (width x depth x height), allowing for compact installation. Max Flow Rate: Capable of achieving a maximum flow rate of up to 14 L/min, ensuring efficient performance for various tasks. Ultimate Vacuum: Can reach an ultimate vacuum of up to 240 mbar, suitable for applications requiring low pressure. Weight: Each unit weighs around 1.6 kg, making it lightweight and portable. Features: Continuous Operation: Designed for long-term use without overheating, making them reliable for demanding applications. Whisper Quiet: Operates at low noise levels, ideal for environments where sound levels need to be minimized. Rugged Reliability: Built to withstand tough conditions, ensuring long-lasting performance. Flexibility and Customization: Can be tailored to meet specific requirements, enhancing versatility across different applications. Safety Compliance: Adheres to IEC 1010 standards, ensuring safety in operation. Applications: Bwodpfsxxz Nhsx Anpew The Dymax series pumps are suitable for a variety of uses, including: Laboratory Use: Ideal for tasks requiring accurate and clean vacuum or pressure sources. Industrial Applications: Versatile enough for various processes in manufacturing settings. OEM Uses: Customizable options make them suitable for original equipment manufacturers needing specific functionalities.

Condition: new, functionality: fully functional, Staying cool, even when temperatures rise! With rising summer temperatures, reliable cooling in production facilities is becoming increasingly crucial. At ONI, we offer high-performance rental cooling systems, ideally suited for use in production environments. Whether as a replacement if your existing cooling system fails, to support insufficient cooling performance, or for general climate control—we have the right solution for your operations. Our portfolio includes: • Chillers from 10 to 10,000 kW cooling capacity • Various designs, including pump-tank units with regulation and control systems • Containerized cooling systems with all necessary fittings and control devices • Cooling towers, dry coolers, and pump-tank systems with complete regulation and control Bjdpfexbzafex Anpsww The benefits for your production: • Avoid production downtime with reliable machine cooling • Maximum efficiency with minimal energy consumption • No capital expenditure, as rental is flexible and tailored to your needs • Instantly operational for maintenance downtime, system malfunctions, or seasonal peaks • Flexible connection options for almost any infrastructure • 24/7 hotline and service—even for third-party equipment Plan ahead—avoid unplanned outages We develop comprehensive cooling concepts before acute needs arise, so you are fully prepared for future challenges. Contact us for a no-obligation consultation—we’ll show you how to safeguard your process cooling while minimizing costs and risks.

Year of construction: 2025, condition: new, Festo water separator, size 12, 8005550, MS12-LWS-G-U-V Bwedozqclzspfx Anpew 2 pieces, new and in original packaging!

Condition: excellent (used), functionality: fully functional, mileage: 39,386 km, first registration: 04/2023, fuel type: diesel, axle configuration: 8x4, fuel: diesel, gearing type: mechanical, suspension: steel, Year of construction: 2023, ASTRA HD9 8450, year 2023, mileage 39,386 km, EURO6, equipped with a CIFA ZL 40C concrete pump with a 40-meter boom, 125 mm delivery pipe, and a PU 1607 pumping unit with a capacity of 160 m³/h. Bwodpj Agbz Rofx Anpew

Condition: good (used), For sale: stainless steel washer / water rinsing machine, previously used for processing green beans, with a working length of 4 meters, width 1.9 meters, and a height of approximately 3 meters. Bwsdpfx Anjwzwzbspew

Condition: used, Kärcher Hot water high-pressure cleaner / steam cleaner Kärcher HDS 1195 S Eco Up to 180 bar working pressure and 1,200 l/h flow rate Hot water and steam operation up to 155 °C For sale is a used hot water high-pressure cleaner from the manufacturer Kärcher. The Kärcher HDS 1195 S Eco is suitable for professional cleaning tasks in industry, trade, and commerce. The combination of high working pressure, hot water, and steam operation allows even stubborn soils as well as oil and grease residues to be removed. Technical data: Manufacturer: Alfred Kärcher GmbH & Co. KG Type: HDS 1195 S Eco Article number: 1.028-337 Equipment type: Hot water high-pressure cleaner Country of manufacture: Germany Mains connection: 400 V / 3~ / 50 Hz Connected load: 8.2 kW Fuse rating: 16 A slow-blow Protection class: IPX5 Working pressure cold/hot water: 30–180 bar Maximum permissible pressure: 198 bar Flow rate: 600–1,200 l/h Flow rate steam operation: 600 l/h Working pressure steam operation: max. 28 bar Hot water temperature: max. 98 °C according to the data plate Steam temperature: max. 155 °C Burner output: 103 kW Fuel: Diesel or heating oil EL Maximum heating oil consumption: 8.3 kg/h Fuel tank: 25 liters Detergent tanks: 20 + 17 liters Maximum water inlet temperature: 30 °C Required water inlet flow rate: min. 1,500 l/h Dimensions (L × W × H): 1,285 × 690 × 875 mm Net weight: 155 kg Gross weight: 185 kg Equipment: Hot water and steam operation Pressure and flow rate regulation Continuously variable temperature control Detergent dosing valve Integrated fuel tank Two detergent tanks Manometer for pressure indication Indicator lights for operating states Mobile unit with transport rollers Hand spray gun and spray lance as shown in the pictures Bedpez R Skyefx Anpjww Application areas: Industrial cleaning Machine cleaning Vehicle cleaning Workshop cleaning Construction machinery cleaning Agricultural operations Cleaning of production plants Removal of oil and grease Cleaning of heavily soiled surfaces Commercial and industrial applications Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Visible corrosion spots on the control panel Scope of supply: 1x Kärcher HDS 1195 S Eco hot water high-pressure cleaner Hand spray gun and spray lance as shown in the pictures Other accessories as shown in the pictures Shipping or forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions on the telephone.

Condition: used, mileage: 26,000 km, power: 143 kW (194.43 HP), first registration: 06/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro5, suspension: steel, total length: 7,000 mm, total width: 2,450 mm, total height: 3,100 mm, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 10,900 kg, Year of construction: 2012, Equipment: ABS, AdBlue, EBS, differential lock, electric window regulation, power assisted steering, trailer coupling, = Additional options and accessories = - Leaf spring suspension - High beam headlights - Air horn - Radio/CD player - Rotating beacon - Sun visor - Power take-off (PTO) - Central lubrication system = Further information = General information Cab: double Technical information Number of cylinders: 6 Engine displacement: 7,146 cc Axle configuration Suspension: leaf spring suspension Front axle: Max. axle load: 5,800 kg; tire tread depth left: 90%; tire tread depth right: 90% Rear axle: dual tires; differential lock; Max. axle load: 10,900 kg; tire tread depth left (inside): 90%; tire tread depth left (outside): 90%; tire tread depth right (inside): 90%; tire tread depth right (outside): 90% Bwedpfjz R Ud Ajx Anpow Weights Unladen weight: 5,175 kg Payload: 10,825 kg GVWR: 16,000 kg Maintenance, history and condition APK (technical inspection): valid until 04.2027 Technical condition: very good Optical condition: very good

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Bodpoz Nkuaofx Anpjww Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: excellent (used), mileage: 795,000 km, power: 280 kW (380.69 HP), first registration: 07/1997, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 7,010 mm, loading space width: 2,500 mm, loading space height: 800 mm, Equipment: ABS, crane, differential lock, electric window regulation, power mirror, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Comfort seats for driver - Differential lock - Differential lock - Speed limiter - Main switch - Rear doors - Hydraulic system - Radio/CD player - Sleeper cab - Sun visor Bsdpszhxztefx Anpjww - Power take-off (PTO) - Power take-off (PTO) - ZF16 manual transmission - Tow hitch = Notes = GOOD CONDITION RENAULT PREMIUM 385.26G 6x2 CHASSIS WITH PALFINGER PK9001 CRANE, TIPPER BODY, ZF-16 MANUAL GEARBOX & REDUCTION AXLE!! 385HP, 6-CYLINDER ENGINE (MECHANICAL PUMP & INJECTORS / EURO 2)!! ZF16 MANUAL GEARBOX!! REDUCTION AXLE!! 10 TIRES!! P.T.O.!! HYDRAULIC SET!! ETC.!! PALFINGER PK9001 HYDRAULIC CRANE BEHIND CABIN!! 3 HYDRAULIC SLIDING SECTIONS!! 2 MECHANICAL SLIDING SECTIONS!! EXTRA FUNCTIONS PREPARED!! TIPPER WITH ALUMINUM SIDE PANELS; LENGTH x WIDTH x HEIGHT Approx. 7.01 x 2.45 x 0.80 m. (Approx. 14 m3)!! TRUCK IS IN GOOD WORKING & DRIVING CONDITION, READY FOR HEAVY CONSTRUCTION WORK!! MORE 4x2 / 4x4 / 6x2 / 6x4 / 8x4 RENAULT (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT OR LOADING?, NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR WEBSITE; YOU CAN ALSO WATCH OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! (/) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = General Information Year of construction: 1997 Technical Information Number of cylinders: 6 Engine displacement: 11,116 cc Transmission Transmission: ZF16 MANUAL GEARBOX, 16 gears, manual transmission Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Front axle: Max. axle load: 7500 kg; Steered; Tire tread left: 20%; Tire tread right: 20%; Suspension: Leaf suspension Rear axle 1: Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Dual tires; Lift axle; Max. axle load: 7500 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Suspension: Air suspension Weights Unladen weight: 12,760 kg Payload: 13,240 kg GVW: 26,000 kg Functional Lifting capacity: 9,000 kg Crane: PALFINGER 9001 (5 SLIDING CONNECTIONS) PK9001, year of manufacture 1997, behind the cab Body brand: FRENO TIPPER BODY WITH PALFINGER CRANE PALFINGER PK9001 CRANE + TIPPER Loading platform height: 110 cm Tipper: Rear Condition Technical condition: very good Optical condition: good Further Information Please contact the Sales Department for further information.

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 KM No. 6268540 Bwjdpfx Anszl Dg Njpsw KM No. 6441936 R901196471

Condition: used, This listing is for the Agilent PCB1500 Water Peltier System. The unit is in full working condition and ready for immediate use. Designed for precise thermal regulation, it provides stable and efficient temperature control for sensitive lab processes. Ideal for integration with analytical instruments requiring consistent cooling performance Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Bsdpfsyz Aquox Anpeww

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg Bodez Slnzepfx Anpeww • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Condition: excellent (used), For sale: Complete industrial unit consisting of a Siemens electric motor and drive unit (pump/gearbox). The device is mounted on a solid base, ready for use in industry, workshop, or as a machine component. Technical data: Manufacturer: Siemens Model: 1LA5083-2AA20 Power: 1.1 kW Speed: approx. 2850 rpm Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Mounting type: B3 Condition: Bwedpfjz Slxyex Anpjw Used, visible signs of use (scuffs, marks on paint). Technically functional. Note: A small plastic component in the terminal box is damaged (visible in the photo). This does not affect the operation of the device.

Condition: new, For sale: a new, unused submersible pump for coolants, brand Speck, model TM-401-110.0005. The pump is designed for cooling systems, machine tools, and other industrial applications. Technical data: Manufacturer: Speck Model: TM-401-110.0005 ID number: 34206 Serial number: 1002283768 Bodpfxez Snxho Anpeww Year of manufacture: 10/2021 Power: 0.5 kW Maximum flow rate: 40 l/min Maximum head: 38 m Power supply: three-phase Frequency: 50 Hz Voltage 380 V: 1.35 A, 2820 rpm, cos φ 0.73 Voltage 415 V: 1.55 A, 2850 rpm, cos φ 0.61 Protection rating: IP54 Insulation class: F (155)

Condition: ready for operation (used), Year of construction: 2016, Brand: Jungheinrich Model: EJE 116 Year of manufacture: 2016 Lifting capacity: 1600 kg Fork length: 1150 x 540 mm Bwjdpez Sn Atefx Anpew Includes internal charger Battery condition: 80%

Condition: excellent (used), For sale: a used submersible pump, VEB Pumpenfabrik Oschersleben KRD1G, manufactured in East Germany (GDR). The pump has been inspected and is in full working order. It is equipped with a carrying handle, power cable, power plug, and a connector on the discharge nozzle. Technical specifications: Model: KRD1G. Bwedpfxjz Sph Tj Anpew Capacity: 0–35 m³/h, maximum approximately 583 l/min. Head: 20–0 m. Motor power: 1.5 kW. Power supply: three-phase, 380 V. Rated current: 4.1 A. Frequency: 50 Hz. Rotational speed: 2700 rpm. Maximum medium temperature: 40°C. Insulation class: F. Power factor cos φ: 0.88. Serial number: 6155170.

Condition: good (used), For sale: a used Hidrostal industrial submersible pump, complete with cables, float switch, control module, and a metal discharge pipe terminated with a Storz-type coupling. The pump has a transport handle and a wide base for stable positioning. Data read from the nameplate: Manufacturer: Hidrostal Type designation: Hidrostal C0CQ-L01 + CNBA2-GXEQ 3 kW with control – the remaining part of the designation is unreadable. Motor number: 116322 Output power P2: 3 kW Input power P1: 3.8 kW Supply: 380–420 V, three-phase Frequency: 50 Hz Rated current: 6.4 A Bwedpfx Anez Spi Rspsw Rotational speed: 2730 rpm Power factor cos φ: 0.86 Winding connection: delta (Δ) Insulation class: F Maximum ambient temperature: 40°C Marking on the nameplate: EEx d IIB T4 ATEX marking number: 99 ATEX 1079 Included equipment: Pump with motor. Power and control cables. Control module with indicators. CEE power plug. Float switch. Metal discharge pipe with Storz-type coupling. Base and transport handle.