Used Water Recycling System for sale (39,111)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. Pedpfx Asua Tbwob Usgi SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Psdpfor Ezdrex Ab Uogi Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".

Year of construction: 2016, condition: excellent (used), A very well-maintained and lightly used water softening unit: BWT AQA Smart Single-Column - Water Softening System For softening drinking and process water, and protecting water pipes, fittings, appliances, boilers, etc. from malfunctions, damage, and/or scaling. Pgsdpfehyl Ulox Ab Uji Water softening – Softener unit According to the manufacturer, the pearl water system, designed for installation in domestic water supply systems, provides optimal protection against limescale. The described unit was only in operation for a short period. The system operates using the intelligent regeneration principle. Regenerating salt for refilling is still available with the unit. Reduces energy consumption and prevents unsightly limescale stains. Energy savings through water softening in the household. 25kg bag of comfort salt tablets; 7 bags available, price per bag €12,-- net ex location plus packaging costs Operating manual available. All relevant documentation is available. All technical specifications subject to errors and misprints. Sale exclusively within EU countries.

Condition: good (used), Year of construction: 2004, We are selling a used system of recycling machines with the following components (year of manufacture 2004): - Chip crusher type RS 300 E with coarse parts outlet (Steimel) - Scraper belt conveyor with torque switch-off (DGS) Pgjdpfxsri N D Is Ab Usi - Chip centrifuge AZ - 250 with feed hopper (ARP) - Vacuum lock VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve - Switch cabinet The system is fully functional and ready for collection

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Pedpfjdzqn Uox Ab Uegi Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Inclusive pumps, Control and other accessories. Psdpfxjh Dxqve Ab Uogi Nice condition

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 35 h, functionality: fully functional, Waterjet cutting system 1020 EcoCube 2D Demonstration system, fully serviced, tested and ready for operation, Maximator JET certificate Availability: within one week High-pressure pump: optional after consultation and availability, e.g. SERVOTRON 40.45+, year of manufacture 2018, complete Maximator JET retrofit Year of manufacture of cutting table: 2022 Operating hours of cutting table: 35 h • Effective cutting area 1,000 x 2,000 mm • CNC control NUM FLEXIUM • Z-axis CNC clear height 100 mm with Quick-UP • Automatic height sensing and collision protection • Laser for position determination Pgjdev Dfxzjpfx Ab Uoi • LED work area lighting • Cutting valve including abrasive cutting head • Ergonomic control panel • HP operator PC with 20 inch LED screen, splash-proof keyboard and Mouse • Water jet software SmartCut powered by IGEMS • Abrasive dosing unit CNC with intermediate container • Abrasive storage container 450 kg with mini hopper pressure conveying system • High pressure connection between pump and cutting head • Safety system with automatic lifting door • Stop edge in X and Y • Guarantee 1 year or 2,000 operating hours Price ex works plus VAT €125,000 Additional services  2D training, system operation for up to 4 people on site at the customer's premises, 2 days €2,400  Installation and assembly up to 400 km one way, 2 days €2,400  Transport according to current daily price approx. €1,600 Subject to changes and errors in the technical data and prices. Subject to prior sale. Payment conditions  100% after delivery, commissioning and acceptance on site

Year of construction: 2013, condition: excellent (used), 4.piece in stock Water cooled switch cabinet cooler Fabr.PFANNENBERG Type:PWS 7412 Bj.2013. Pgjdpfxsiicp Eo Ab Uei Price is for 1 piece.

Condition: used, This listing is for a Waters fraction Collector 111 chromatography system The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Pjdpfx Ajxtbcqeb Uogi Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. Pgsdpox Da Tiofx Ab Uei If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator Pjdpfx Aexz Avnjb Ujgi -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm Pjdpfsv Aip Usx Ab Usgi -Weight: 22 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator Podpfx Ajfmilmsb Uegi -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Condition: good (used), Emulsion splitting plant, oil-water separation system Pjdpfx Absb A S I Hs Usgi -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator Pjdpfx Abstxkvrj Uegi -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg Pedpfxsig A Awo Ab Uegi

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator -Manufacturer: BEKO, oil-water separation system, oil and water separation device -Type: Öwamat 2 -Dimensions: 450/370/H760 mm -Weight: 12 kg Pedpfx Aov Auqdob Usgi

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 Pgsdpefnxxdsfx Ab Usi -Dimensions: 430/330/H680 mm -Weight: 27kg

Condition: used, Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. Pgjdpfx Absctlaqj Usi -Dimensions: 590/590/H1170 mm -Weight: 58 kg

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Pedoyizqnopfx Ab Ujgi Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Condition: ready for operation (used), Year of construction: 2014, Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible. Podpfxsru Hvis Ab Usgi

Condition: ready for operation (used), Year of construction: 2020, A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Pgedpfxjxmkcme Ab Uei

Condition: good (used), Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available Pedectla Hspfx Ab Ujgi -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg Pedpfx Ajq Ei Dbeb Usgi

Year of construction: 2023, condition: excellent (used), Flowtech Flowboost 2V JH1 water pump system with tank Pedoulianopfx Ab Ujgi 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph