Used Water Drip Pan for sale (10,681)

Condition: used, 100,000 litre – underground tank - double-walled - cleaned - 2 manholes - slight traces of dismantling present Dedpfx Afexcgg Tsnscc - internal coating possible upon request - Approved for service and firefighting water Loading and transport can be offered! Only serious and credible enquiries with the following details will be answered: Name, e-mail address and telephone number.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,646 h, functionality: fully functional, machine/vehicle number: 20360, Available for inspection in operation at our production facility. Waterjet cutting machine 6x3m, 1x2.5D cutting head, incl. HD pump 4000 bar, stainless steel cutting tank, abrasive remover. Purchase date 03-12-2013 Serial number 20360 Model Resato ACM 3060 Operating hours 26,646 hours (as of 24 October 2025) XY working range machine 3020 x 6020 mm Precision in X or Y axis +/-50 µm Maximum gap between bridge 210 mm +/- 10 mm Z-axis range -220 – 0 mm Maximum working pressure 4000 bar Minimum speed 1 mm/min Speed range 1 – 30,000 mm/min Maximum acceleration 500 mm/s2 (acceleration depends on cutting process) Ambient temperature 12 – 32°C Relative humidity 30 – 80% General protection class IP54 Specific protection class IP65 Voltage-frequency 1x 230 ± 5% VAC, 50-60Hz Electrical connections 1 x 16A + N + PE Operator panel 17’’ touchscreen, color Network/internet connection RJ45 socket Communication 100BaseT CAT5e Slat load capacity 1000 kg/m2 Floor load 5 N/mm2 Air connection Quick coupling, type Orion Air quality Dry and filtered air Dew point at 3°C at 7 bar Min 7 bar, max 12 bar 30 Nl/min Required floor flatness Max 15 mm deviation over 6 meters Typical sound pressure level 87 – 92 dB Special details The tank was originally plastic but has been modified to stainless steel Pump specifications (optional extra pump available as spare) PJ4-4000 – Resato Waterjet Centix ID: 601194 Model: Resato Powerjet 4000 Serial number: 18996 Purchase date: 26-11-2012 Dcedsxu U Nmspfx Afnsc Max. capacity: 3.8 L/min Max. pressure: 4000 bar Max. power: 30 kW Number of intensifiers: 1 Low noise level:

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Dsdeygmcdepfx Afnocc

Condition: new, Refrigeration unit 14 kW Dcedpjxfk Tcofx Afnec

Condition: good (used), axle configuration: 3 axles, first registration: 05/2015, total length: 14,000 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,090 mm, color: silver, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional options and features = - Air suspension = Remarks = Pezzaioli 5-deck livestock trailer – water & ventilation – tail lift – folding floors – BPW axles – 155 m³ Year of manufacture: 19-05-2015 VIN: ZFJSBA31UFM005401 Registration: ON-52-TN Dcsdpfx Aeyfl Uiefnoc APK/TUV: until 18-04-2026 5 decks: 1 = 23 2 = 33 3 = 33 4 = 33 5 = 33 155 m³ Water supply & ventilation system Tail lift Folding floors & roof BPW axles = Additional information = Axle configuration Axle make: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 9,000 kg; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 2: Twin tires; Max. axle load: 9,000 kg; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Rear axle 3: Twin tires; Max. axle load: 9,000 kg; Tyre tread left inner: 40%; Tyre tread left outer: 40%; Tyre tread right inner: 40%; Tyre tread right outer: 40% Weights Unladen weight: 11,900 kg Payload: 27,100 kg Gross vehicle weight (GVW): 39,000 kg Functional Tailboard: Rear flap Inspection, history and condition APK (roadworthiness test): Valid until 04.2026 Technical condition: good Visual condition: good Identification Registration number: ON-52-TN Further information For more information, please contact VAEX The Truck Traders.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical data: - Capacity: 32,000 bph on 1.5L - Formats: 1500 ml - Filling product: Water and Non-carbonated drinks - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment includes: Preform hopper – M. Tanner AG / Prologic Cap hopper – Gassner Preform orientator – M. Tanner AG Blow moulder – Krones Contiform S20 Filler – Krones Volumetric Dcsdpfxjxxbl No Afnjc Nitrogen doser – Cryotech International Capper – Krones Bottle inspector – Krones Checkmat Bottle conveyors – Krones SynCo Labeller – Krones Etima Coder – Markem SmartLase C350 Shrink-wrapper – Ocme Vega N70/2 Handle applicator – Comag/Decimo HM 100/2 Pack conveyors – Europool Palletiser – Ocme Pegasus M400 Pallet wrapper – Bema Silkworm Turbo Pallet label printer/applicator – Bancale Eidos 7P6ERL

Condition: like new (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, Technical data: - Capacity: 54,000 bph on 250 ml - Formats: 250 ml / 500 ml / 1,000 ml / 1,500 ml - Filling product: Water and non-carbonated beverages - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Dcodpjxvda Dofx Afnoc Equipment included: - Krones Preform Contifeed Orienter Feeder - Krones 24-cavity Blow Molder, model Contiform 324 Pro - High pressure air compressors, low pressure and high pressure booster - Krones 88-valve Volumetric Bottle Filler, Modufill PET with 33-head capper set for 26.7 mm - Krones model Capcade, cap hopper – cap feeder for flat caps - Fogg model 756-5-5-12-U-19, cap hopper – cap feeder for sports caps - Krones Checkmat Inspection System - Krones Linadry Air Knife System - Two (2) Krones Contiroll 8100 Hot Glue Wrap-Around Roll Feed Labelers - Two (2) Krones Checkmat Inspection Systems, post-label - Markem-Imaje Coder SLC350 - Krones stainless full-bottle conveyor and controls - Krones full case conveyor from packer discharge to palletizer infeed - Krones Robobox Case Orienter - Krones Modulpal Case Palletiser - Krones Palco full pallet discharge roller conveyor from palletizer to wrapper - Wulftec pallet wrapper with infeed and discharge pallet conveyor, model WCRT-200 - Ingersoll-Rand low pressure compressor (plant air), model IRN100N-OF (VSD) - Ingersoll-Rand low pressure receiver tank and air dryer - Atlas-Copco low pressure model ZR315VSDFF (paired with HPC-001) - Atlas-Copco high pressure air compressor booster - Manchester high pressure receiver, model 303724–600 gal *All equipment has already been dismantled and was serviced by Krones technicians The line is ready for shipment Installation and commissioning can be included in the offer

Year of construction: 2020, condition: used, New: No Price: On request VAT/margin scheme: VAT deductible = Company information = For further information you can reach us on weekdays from 8:30 am to 5:00 pm and on Saturday from 10:00 am to 3:00 pm by phone . You can also email us at: See you soon! Dsdpfx Aoydi E Nefnscc

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. Dsdjxvca Aspfx Afnocc 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: used, Technical data: Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Dcodpferi Si Djx Afnsc Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Sidel Combi PET Bottled Water Filling Line – 18,400 BPH Manufacturer: SIDEL Year: 2018 Capacity: 18,400 bottles/hour (0.5L) / 16,400 bottles/hour (1.0L) / 14,400 bottles/hour (1.5L) Line configuration: - Blow Molder: SIDEL MATRIX SBO 08 MM 8/8 (2018), includes Box Tipper, Lifting & Tipping Unit - Automatic Preform Feeding: SAMETO EBHS 2050 (2018) Djdpfx Aox Nahysfnecc - Compressor: SIAD VITO 1920 (2017) - Tribloc Rinser-Filler-Capper: SIDEL SF 100 FM (2018): 100 rinsing stations, 32 filling valves, 8-head screw capper (29/25), 141 mm pitch - Cap Feeder: Krones Gebo Cermex (2018) - Fill Level/Cap Inspection: QUBBER (2018) - Container/Label Inspection: QUBBER (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Labeller: SIDEL ROLLQUATTRO F15EVO 18T/R HH3 S1/E1 (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Shrink Wrapper: SIDEL VERSA FILM ACCESS (2018) - Pack Conveyor: Tetra Pak / Gebo Cermex (2018) - Carry Handle Applicator: KARTVILLE H 120 ND (2018) - Palletizer: SIDEL KOMBI 1P 1I IN LINE (2018) - Pallet Conveyor: Tetra Pak / Gebo Cermex (2018) - Pallet Inspection: Tetra Pak / Gebo Cermex (2018) - Layer Pad Inserter: Tetra Pak / Gebo Cermex (2018) - Pallet Stretch Wrapper: Robopac HELIX 3 E (2018) All equipment is in excellent condition and suitable for high-capacity still water bottling in PET packaging.

Condition: good (used), Year of construction: 1984, Water slot milling machine, water slot milling machine Dcjdox R Sv Sopfx Afnoc -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Condition: used, Year of construction: 2015, functionality: fully functional, Water chiller, brand Eurocold, 15 kW (13,072 frigorías), model ACW-MP120 AL SL D2, with 65-liter tank, refrigerant R-407C, consumption: 6.4 kW, water flow from 20 to 100 liters/minute. Dimensions: 755x790x1380 mm (height), weight 190 kg. Applications: plastics processing, air conditioning, automotive, pharmaceutical chemistry, food industry, laser, machine tools, wine production, etc. Unit inspected, fully charged with refrigerant, with warranty. Delivery across Spain and Europe. Shipping costs not included. Reference: 1149. Available stock: 30 units. Dsdpox Nf Npsfx Afnscc

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced thoroughly after complete service in 02/2026, inspected and ready for operation. Maximator JET certificate available. Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 hrs • Effective cutting area: 2,000 mm (gantry) x 1,000 mm • Z-axis CNC vertical clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control NUM • Rittal electrical cabinet on wheels • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS; subscription-based • Handheld operator device • Laser for position detection • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container 1,200 kg with automatic pressure feed system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water tank with heavy-duty support slats • Reference edge on X and Y • Machine feet with precision wedge shoes • 1-year or 1,200 operating hours warranty • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 hrs, retrofit in 10/2025 with warranty, new pulsation damper with TÜV certification Technical data and prices subject to change and errors excepted. Dcedpoxvqvfsfx Afnoc Sale subject to prior sale.

Condition: used, double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW Dodpfsdzxklsx Afnjcc -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Condition: used, Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid Dcodpfsharutjx Afnec -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg Djdpoxz Avnsfx Afnocc

Year of construction: 2013, condition: good (used), Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: Denios, spill containment tray with steel cabinet construction -Drip tray: Type MC 1.10 Dedpjwmm Stefx Afnocc -Collection volume: 1100 liters -Load capacity: 2000 kg -Dimensions (D/W/H): 1580/1340/1930 mm -Dimensions: D/W/H 1925/1590/2760 mm -Weight: 493 kg

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet Dcjdpetxkvrofx Afnoc

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator Dcjdpfefmilmjx Afnjc -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Condition: good (used), Emulsion splitting plant, oil-water separation system Dedpfeb A S I Hsx Afnecc -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank Dcodpfx Ajvmxx Tofnec -Pump: Motor Schlüter 1.5 kW -Container capacity: liters -Dimensions total: 850/620/H670 mm -Weight: 124 kg

Condition: good (used), oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator Dcedev Aip Uopfx Afnec -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Condition: good (used), Water softener, water softener tank -Bank: approx. 200 liters -Incl. Regeneration salt for water softeners -Dimensions: 640/640/H880 mm -Weight: 172 kg Dcedpjctla Defx Afnjc

Condition: used, Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator Dcjdoig A Awepfx Afnoc -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg