Used Weiler Commodor 75 for sale (195)

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Kdsdpfx Apez Dgvns Dsu Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, Year of construction: 1982, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1982, with a three-jaw chuck, Multifix system, and collet chuck assembly including a set of collets. The machine is in good, operational condition and can be demonstrated under power by arrangement. Kdodpfx Apjzq R Ane Dsu

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm Kjdpfx Apsz A Tgqs Dedu >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: used, Year of construction: 2009, power: 11 kW (14.96 HP), spindle mount: MK 6, rotational speed (max.): 2,800 rpm, rotational speed (min.): 9 rpm, total width: 1,456 mm, total length: 4,500 mm, total height: 4,600 mm, overall weight: 12,100 kg, Equipment: CE marking, We offer this used WEILER VO 100 radial drilling machine, year of construction 2009. Manufacturer: WEILER Holoubkov S.R.O. Model: VO 100 Serial number: 152 452 057 Weight: 12,100 kg Year of manufacture: 2009 Country of manufacture: Czech Republic Kedpfxsz A S D Io Ap Dodu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Kdodpfx Aezt Iacop Dsu Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, Year of construction: 1999, Cycle-controlled lathe Weiler E50 Year of manufacture: 1999 Control system: Weiler cycle control D1 Operating hours: 28,506 Distance between centers: 1,000 mm Kedpfx Apszt S Svo Dedu Distance between centers (height): 280 mm Max. chuck diameter: 315 mm Max. diameter over bed: 570 mm Max. diameter over cross slide: 340 mm Max. diameter over tool rest: 600 mm Length of tool rest: 140 mm Max. workpiece weight: 1,600 kg Spindle bore: 83 mm Spindle head: size 8 Quick-change tool holder: Parat 4-way turret Includes 1 new RÖHM chuck jaw! Dimensions: 2,850 x 2,280 x 1,750 mm Weight: 3,350 kg Available immediately 191026ä

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system Kdjdpfxjz D Hx No Ap Deu >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: good (used), Year of construction: 1987, CNC turning machine WEILER Primus 2 CNC, serial number 151, CNC control system by Bosch. Kdjdpfx Ajz R R Eiep Dsu

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Kedpfxszr Rnye Ap Dsdu Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1996, greates pass round over bed 320 mm turning dia. over face-slide 198 mm centre height 160 mm turning length 650 mm spindle turning speed range max. 3.000 U/min spindle passage 40 mm tailstock quill taper MT 3 quill stroke 85 mm Kjdpfx Apez Rqp To Dedu total power requirement 4 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams

Condition: excellent (used), Weiler lathe, center distance 450 mm - Weiler model not clearly identifiable. No nameplate present. - Center height: 125 mm - Center distance: 450 mm - Spindle bore: 23 mm - All speeds function correctly? Yes! - Feeds function correctly? Yes, manually! - Not designed for thread cutting Kodjz E U T Depfx Ap Djdu - Minimal play is present, which is completely normal for its age. ----- Condition of the item: Good used condition. Internal number: 26.565 and 26.566 2 units available. Price per unit.

Condition: good (used), Year of construction: 1989, CNC turning machine WEILER Primus 2 CNC, serial number 160, CNC Bosch. Kjdpfoz R R E Nex Ap Dsdu

Condition: excellent (used), For sale: a legendary, German-made WEILER Matador precision lathe (accuracy class according to DIN 8605 for toolrooms). The machine was imported from Germany and is in beautiful, original condition (original paint, no signs of industrial wear). The machine underwent rigorous technological tests under power – it is 100% functional, and the accuracy and repeatability achieved during test turning over the length of the shaft resulted in a difference of only 0.02 mm! The bed and lead screw are in perfect condition, which guarantees the precision for which the Weiler brand is known. This is an extremely compact version, ideal for precision model-making workshops, toolrooms, component refurbishment, or laboratories. Technical specifications: Kodpfx Apsz I Ef Aj Dsdu • Manufacturer: WEILER (Germany) • Model: Matador (VS1 series) • Swing over bed: 280 mm • Swing over cross slide: 160 mm • Distance between centers: 500 mm • Taper in tailstock: Morse 3 (MK3 / MT3) • Spindle speed range: 30 – 3550 rpm (16 spindle speeds – ideal for modern indexable inserts) • Chuck: 160 mm Very extensive equipment included in the price: 1. Original Haidenhain digital readout (DRO): Factory-installed display system with scales, 100% functional and reading the axes. 2. Quick tool change system (Multifix): Original quick-change tool holder with a tool block. 3. Set of additional change gears: A complete set of gears for configuring the change gear mechanism for custom feeds/threads. 4. Tailstock equipment: Precision rotating center included. 5. Starter kit: Basic set of turning tools, allowing you to start working immediately. 6. Safety: Complete guard for the work area above the chuck, and factory-installed, bellows-type guards for the screws and lead screw. Logistics: • The machine can be fully tested and the accuracy tests can be repeated on-site under power. • LOADING INCLUDED IN THE PRICE – I provide safe and professional loading of the machine onto your transport using a forklift. Price: 24,200 PLN net (negotiable). VAT invoice provided.

Condition: excellent (used), functionality: fully functional, center height: 165 mm, bar diameter (max.): 40 mm, WEILER CONDOR VS 2 -Condition: “Good” -Maximum turning diameter: 165 mm -Swing over bed: 330 mm -Distance between centers: 800 mm -Spindle speed range: 28-2800 rpm -Automatic longitudinal / cross feeds -Spindle bore: 40 mm -Threading capabilities: Metric, inch, etc. -Collet chuck - quick-change tool holder incl. collets Ksdjzvy T Tepfx Ap Djdu -3-jaw chuck -Faceplate -Multifix system with inserts -Emergency stop -Documentation

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Kedpsyuyruofx Ap Djdu Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg Kdjdpfoy Ulqwsx Ap Dsu >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: good (used), functionality: fully functional, + Multifix "A" baseplate + Three-jaw chuck + Collets + Coolant pump Center height approx. 150mm Swinging diameter over support 160mm Swinging diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 RPM Automatic longitudinal/cross feeds Tailstock MK3 Ksdpfx Ajz Hatlop Dedu Dimensions (LxWxH): 150 x 70 x 150cm Weight: 600Kg

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Guideways "Good" -Optional 3-axis digital display -Center height 165 mm -Swinging diameter over bed 330 mm -Distance between centers 800 mm -Speed range 28-2800 rpm -Automatic longitudinal / crossfeed Kedpfx Apjztfius Dsdu -Spindle bore approx. 40 mm -Threading / Metric / Inch, etc. -Collets / Quick-change tool holder incl. 20 collets -Three-jaw chuck -Multifix with inserts -Chip guard -Drill chuck / Follower point -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 850 kg

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard -Coolant system Kdjdpfx Aszn Rahsp Dou -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guideways: "Good" -Optional 3-axis digital display -Center height 165mm -Swing over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collet chuck - quick-change system -Four-jaw chuck -Multifix base and insert -Chuck guard -Coolant system -Emergency stop -Documentation Dimensions: Kodpfx Apszta Dmj Dsdu L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg

Condition: excellent (used), functionality: fully functional, Weiler Praktikant R 500 lathe In very good condition, turning test: 100mm, runout 0.005 parallel. Guideways and smooth running in all speeds are flawless. Turning diameter: 280 x 500 Spindle speeds: 42 - 2000 Spindle bore: 36 3-jaw chuck Röhm 160, live center, quick-change drill chuck, lighting, coolant system. Multifix A with 4 holders, additional accessories available upon request. Kodpfx Apozbhnqo Dodu Dimensions: L 1.42m, W 0.6m, H 1.24m, weight approx. 600 kg Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: used, Max. turning length: approx. 800 mm, center height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, manufacturer: ELESTA, type: VISULESTAIIE, with Multifix steel tool holder, magnetic chuck, coolant system, splash guard, and machine light, as well as various machine accessories. Kdedpfxoz Nhpbo Ap Dsu

Condition: like new (used), Weiler Voest DA210, an original fixed and adjustable sun visor, in very good condition. Kjdpfsz N Smwox Ap Dedu

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Tailstock internal taper MK 2 Drive power 1.1 kW and 1.5 kW, pole-reversing Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Kdjdpfxjz N H Dqj Ap Dou Weight 325 kg Good condition

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, spindle motor power: 4,000 W, total height: 1,700 mm, total width: 890 mm, overall weight: 1,050 kg, bar diameter (max.): 43 mm, product length (max.): 1,570 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details. • Machine Type: Centre Lathe • Turning Length / Distance Between Centres: 500 mm • Swing Over Bed: 280 mm • Swing Over Cross Slide: 150 mm • Spindle Nose (DIN 55027): Size 5 • Front Bearing Diameter: 70 mm • Spindle Bore: 43 mm • Main Spindle Internal Taper: ME 50 • Drive Power (100% Duty Cycle): 4 kW • Spindle Speed Range: 30 – 4,000 rpm • Number of Feed Rates: 24 • Longitudinal Feed Range: 0.02 – 0.63 mm/rev • Cross Feed Range: 0.006 – 0.20 mm/rev • Metric Thread Range: 0.25 – 8 mm • Inch Thread Range: 80 – 2 TPI • Module Thread Range: 0.25 – 4 Module • Diametral Pitch (DP) Thread Range: 200 – 5 DP • Tailstock Quill Diameter: 40 mm • Tailstock Quill Travel: 85 mm • Tailstock Taper: MT3 • Operating Voltage: 400 V • Control Voltage: DC 24 V • Connected Load: 7.5 kVA • Nominal Current: 15.5 A • Frequency: 50 Hz • Main Fuses: 25 A • Machine Weight: 1,050 kg • Machine Dimensions (L × W × H): 1,570 × 890 × 1,700 mm Additional Equipment • 4-Position Quick-Change Tool Post PARAT Size 1, incl. 1 × WD 1/12 Tool Holder • 2 × WD 1/12 Tool Holders • Lever-Operated Collet Chuck for 173 E Collets • 13 × 173 E Collets, Clamping Range: 3–15 mm (1 mm Increments) • Fixed Steady Rest with Roller Jaws, Capacity: 15–100 mm • Movable Chip Splash Guard with Viewing Window • 8 × Levelling Elements Kdedpfx Apjzpwh Uo Dju Technical Specification Counter Spindle No Driven Tools No