Used Welding Machinecompressor for sale (5,545)

Condition: used, TIG Welding Machine DALEX Type GL/W 201 TIG Welding Unit Machine No.: 201 Year of manufacture: approx. 1995 Power output: 200 Amp at 35% duty cycle 160 Amp at 60% duty cycle 120 Amp at 100% duty cycle Adjustable range: stepless Current type: DC – Direct Current Mains connection: 400 Volt, 50 Hz, 5.9 kVA, 32 Amp plug - 2-stroke and 4-stroke welding function Lsdei E Izvspfx Ab Tshc - 8-meter TIG torch package - HF ignition - Shielding gas pressure regulator - MMA welding for stick electrodes - Fan cooling - Socket for foot pedal (foot pedal not included) Space required (L x W x H): 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test shows very good results when welding stainless steel with DC. Overall in very good condition.

Condition: used, Straightening and welding plate, cast steel / grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 1985 mm Width: 1000 mm Thickness with ribs: 220 mm Working height: 860 mm Plate thickness: approx. 35 mm throughout Lhsdpfx Abekpwuxs Tsc - 4 height-adjustable feet Weight: 1050 kg

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine Lodjhpf Iyspfx Ab Tehc - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Ledjg D H Rujpfx Ab Tshc Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Lhsdpfxjwypqle Ab Toc Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, TIG welding equipment, TIG welding machine NIMAK type GS 200 W Lhjdpedzqbvofx Ab Tec TIG and electrode DC welding unit, E-welding machine also suitable for stick electrodes Serial No. 26642 Year of manufacture approx. 1983 Output 200 Amp. = 60% duty cycle 150 Amp. = 100% duty cycle Stepless adjustment range of performance Power supply 380 Volt, 50 Hz, 32 Amp. plug - 5 meter TIG torch package - HF ignition - Stepless current adjustment and current up-slope - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H 900 x 590 x 1000 mm Weight approx. 200 kg Good condition

Condition: used, Steel and cast iron straightening and welding plate, heavily ribbed heavy-duty straightening plate Length 1600 mm Width 1005 mm Thickness 280 mm Lhedpfxjdzqbao Ab Tjc Plate thickness approx. 85 mm throughout - Center hole Ø 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes Ø 27 mm Weight approx. 2.5 t Good condition Former press table – presumably machined parallel on both sides

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC The machine only operates with direct current welding and contact ignition Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle 140 Amps = 100% duty cycle Infinitely variable setting range Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works Lsdpfjdzqa Isx Ab Tohc - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Lhedpfx Abjdzqa Hj Tec Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: used, WIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture approx. 1975 Output 225 amps = 60 % duty cycle 125 amps = 100 % duty cycle Adjustment range 2.8 to 225 amps Current type: DC and AC (AC-DC) Mains connection 380 Volt, 50 Hz - Power adjustment in 5 coarse stages and stepless fine adjustment via potentiometer - 2-stroke and 4-stroke welding function - Remote control with potentiometer for fine adjustment - Digital ampere display Lhedpfx Abjdzqacs Tec - 4-meter WIG torch package - Welding gas pressure-reducing valve - Water-cooled Dimensions (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Ljdpfx Absdzp U Ij Tshc Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results. Lsdpfx Abod N E Rvs Tehc

Condition: used, Spot welding machine DALEX type SL 16 EA Machine No. 68611900-5 Year of manufacture: 1986 Rated power at 50% duty cycle: 16 kVA Maximum welding power: 50 kVA Throat depth: max. 500 mm Electrode force: max. 17 - 278 daN Electrode arm diameter: Ø 45 mm Electrode holder diameter: Ø 25 mm Arm spacing: 140 mm / 280 mm Power switch: 8 stages Control: 4 times with single and series spots Operating pressure: 1-6 bar Open circuit voltage: 1.8 to 3.6 volts Lhedpfewwaz Njx Ab Tjc Connected load: 37 kVA Electrical connection: 400 Volt, 50 Hz - Welding cycle initiated via electric foot switch - Welding time infinitely adjustable - Water-cooled Space required (L x W x H): 1100 x 600 x 1200 mm Weight: 200 kg Good condition

Condition: used, Steel cast and grey cast iron straightening and welding plate, heavily ribbed Heavy-duty straightening plate Length: 1600 mm Width: 1000 mm Thickness: 210 mm Plate thickness: approx. 32 mm throughout Table height / working height: 565 mm - Very stable steel table base (custom-made) - Plate with base movable by pallet truck Lodpfeqvq Ucox Ab Tehc Weight: 740 kg Good condition

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg Lhsdpjdz Sq Esfx Ab Tec

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt Lhjdpfxexabm No Ab Tjc weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch Lhodpfxsxabl Ss Ab Tsc

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. Lhodexaatnjpfx Ab Tjc - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off Lhsdpfoxaafqox Ab Tsc - Control for turning time

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, arm reach: 3,000 mm, Mobile welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type KEMPER. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Model: Filter-master XL Fan power: 1.5 kW Airflow: 1000 m3/h Vacuum: 3000 Pa Cartridge filter element. Lhedpfx Absymkq Ss Toc Stock no.: 1110

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Lhedpfx Abox Ic T As Tec Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: good (used), functionality: fully functional, Welding turntable, L-manipulator, positioner, in excellent condition, includes additional clamping plate. Rotating and tilting (overhead), steplessly adjustable speed. Mechanical height adjustment from 800 mm to 1100 mm. Outreach 1000 mm. Overall height 1800 mm. Length 3000 mm. Width 1100 mm. Clamping plate diameter 1000 mm. Lhjdpfjylkn Ijx Ab Tjc

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Lsdpoyli Uyofx Ab Tjhc

Condition: like new (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, Römheld welding positioner with 1500 kg load capacity and very large clamping plate, in excellent condition. Equipped with foot remote control. Infinitely variable speed control. Plate: 1500 x 1500 mm. Lhsdpfx Abjyli Elj Toc Height at vertical plate to center: 760 mm. Height at horizontal plate: 960 mm. Length: 1300 mm. Width: 1100 mm.

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Equipment: foot remote control, Welding Positioner KT 500 Table diameter: 1000 mm Length: 1300 mm Width: 1000 mm Height with vertical faceplate: 760 mm, horizontal: 960 mm Lodpfxsyliqhj Ab Tshc Tilt range stepless electric approx. 0 – 130° Speed approx. 0.1–4.0 rpm Welding current transmission max. 500 A Incl. remote control Optional extra: Quick-change chuck Diameter 400 mm, €550.