Used Welding Machinecompressor for sale (5,452)

Condition: used, Year of construction: 2023, TEKA welding fume extraction system Model VACCUBE 30 used Csdpj Ah Drvofx Aktori Year of manufacture: 2023 Power: 3.0 kW Current consumption: 7.2 A Connection voltage: 400 V / 50 Hz Max. capacity: 320 m³/h Max. pressure: 27000 PA Filter area: 8.16 m² PTFE Sound level: 68 d(B)A Weight: 125 kg

Condition: excellent (used), Equipment: foot remote control, Welding rotary table, 5000 kg load capacity Approximate height when tilted: 930 mm Approximate height when horizontal: 1160 mm Cede Ah Swhjpfx Aktjri Diameter of the clamping plate: 1100 mm Length: 1800 mm Width: 1200 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Comes with various accessories, including piping and automatic control for self-cleaning. Codpfxjzn Uk De Aktjri The system has 2 suction inlets and one outlet for the filtered air. I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Dimensions: approximately 4 x 2.5 x 3 m.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Welding table with clamping system Manufacturer: Siegmund Large format: 3000 x 1500 mm with clamping system and trolley Cedpfxs Ahm Sqo Akteri

Condition: good (used), Year of construction: 2020, functionality: fully functional, Equipment: type plate available, We are offering this excellent TEKA Caremaster welding fume extraction system for sale. Manufacturer: TEKA Model: Caremaster Machine type: Welding fume extraction system Without filters!!! Two units available. If you have any questions or require further information, please do not hesitate to send us a message or call us. Csdpfxe Agcwwe Aktori

Condition: good (used), Year of construction: 2012, machine/vehicle number: 222262, Offer 26269 Technical specifications: - Welding current: max. 400 A, 52% duty cycle - Welding current: max. 290 A, 100% duty cycle - Adjustable welding current - in 2 coarse steps and 10 fine steps from 30 A to 400 A - Digital voltage and amperage display - 4-roller wire feed, continuously adjustable - Control unit M 101 for: - Two-stroke/four-stroke regulation - Interval welding - Spot welding - Continuously adjustable creep speed and wire burn-back time - Hose pack approx. 4 m - Ground cable - Pressure reducer Crede Ah Eqzopfx Aktoi - Connection: 400 V - Space requirement: approx. W 650 x H 1100 x D 1100 mm - Weight: approx. 180 kg

Condition: ready for operation (used), Welding positioner, Thieler, 6000 kg load capacity Height in horizontal position: 1530 mm Height in tilted position: 1250 mm Cjdpfe Ah Sngjx Akteri Diameter of the clamping disc: 1100 mm Length: 2600 mm Width: 1200 mm

Condition: used, Year of construction: 1998, type of input current: three-phase, pressure: 7 bar, input voltage: 400 V, power: 6 kW (8.16 HP), No. 3290 4-head welding machine Urban AKS 1400/ETS Crsdpfx Ae Ah Un Nsktsi Used, year of construction 1998 According to our customer / the previous owner, the machine is fully functional and can be inspected on site Vertical 4-head welding machine for PVC window profiles, welding all 4 corners at 90° in one operation Fully automatic cycle with automatic outfeed of the welded frame onto a conveyor Vertical/horizontal tilting unit, can be linked to a corner cleaning machine with turning station Electronic positioning of the X, Y1 and Y2 axes by servo motors (Lenze servo inverters) Urban IPC control with B&R Provit 2500 operator panel Extended working range, welding dimensions max. approx. 3850 x 2220 mm, min. approx. 355 x 320 mm Profile height 50 - 100 mm (clamping height SH 100) Profile width max. 130 mm, 150 mm on table side Weld bead limitation 2 mm Heating plates 200 x 295 x 15 mm with Teflon holder, temperature controller for each heating plate Adjusting plate 190 mm, welding stop 24.0 mm, loading stop 17.8 mm, left-hand stop Power supply 230/400 V / 50 Hz, rated power 6 kW Compressed air 7 bar Profile supports for SL 70 (outer frame, sash) and SL 82 (outer frame, sash, entrance door sash) Various spare parts (Lenze controller, brake, temperature controller) Transport dimensions approx. 5400 x 2400 x 3100 mm LWH Weight approx. 2500 kg Sale on behalf of customer, ex location near 55120 Mainz, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 1,500 kg, Equipment: documentation/manual, Used rotating device in very good condition. - Year of manufacture 2016, mobile, rotatable 360° for assembly, welding, etc. - One unit driven, the other unit rotates passively. - CE certified, with documentation. - Adjustable axle distance. - Max. component weight 1500 kg. - Max. diameter 1600 mm. - Max. component torque 2080 Nm. - 2-hand operation. - Optional foot control. - Protection 16 A. Crodpfx Aksz S U Rdotsi - Own weight 670 kg. Like new. 2 units available for sale.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Crjdpfx As Ahm Iioktsi Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: Cedpoz Ng Nyofx Aktori 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Csdpfxjz N Am Us Akteri Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: like new (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Sideros Syncrolift column lift swivel device, 4000 kg load capacity, in new condition, mobile with numerous accessories Minimum height: 350 mm Maximum height: 1800 mm Vertical travel: 1450 mm Crodpfs Ahdrnsx Aktei Diameter of clamping plate: 600 mm, additional hole plate mounts, plasma nitrided Overall height: 2505 mm Total weight: 1300 kg Torque: 3500 N/m Speed: 0.75 rpm Complete with CE marking and documentation, as well as a declaration of conformity.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 15-0577, Offer 26279 Clamping, aligning, and welding table with T-slots and cast iron rails Technical data: - Length 3000 mm - Width 1500 mm - Table height 835 mm - Max. point load (with adjustable feet) 1500 kg - Grid engraving 100 x 100 mm - Axle spacing 100 mm Crjdpfx Akj Ah Ri Detji - Weight approx. 600 kg

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 Csds Aazd Eepfx Aktjri The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: good (used), Year of construction: 2015, Offer 26282 Clamping, alignment, and welding table with T-slots and cast iron rails Technical data: - Length 3000 mm - Width 1500 mm - Table height 835 mm - Max. point load (with adjustable feet) 1500 kg Crjdpfx Akj Ah Rp Hjtoi - Grid engraving 100 x 100 mm - Distance between axes 100 mm - Weight approx. 600 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ Cjdpfeyxvwijx Akteri The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: A self-contained, dedicated tooling system designed for a specific operation within an automated production line. It features a robust, open central frame and standardized, heavy-duty mounting units. The tool directly interfaces with industrial robots in a thermal hazard zone, incorporating advanced installation safety features and a dedicated system for dissipating stray currents. COMPONENT LIST: Crjdez Ng N Tjpfx Aktsi 1. DESTACO brand main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle indicator (range 5-135°) to facilitate collision-free loading. 2. Eye bolts (lifting lugs) – 4 pieces. 3. Copper grounding blocks (welding grounding) – approximately 2 connection points. Thick copper connections protect the electronics and positioner bearings from welding current. 4. Electro-pneumatic junction box (I/O connection box) – 1 piece. A collective housing for signals from inductive sensors, facilitating communication with the PLC controller. 5. Base blocks (NC blocks) with an X, Y, Z coordinate plate – approximately 25 pieces. Base pillars (so-called shims) guaranteeing perfect spatial positioning of the part. 6. Pneumatic installation in red protective sleeves – a complete supply line hidden within fire-resistant covers, safely routed inside the profiles and through edge feedthroughs. 7. Base frame with a process stand – 1 set. Consists of a galvanized working frame and a black service stand for offline maintenance tasks.

Condition: used, Year of construction: 2026, table length 2000 mm table width 1000 mm table height 900 mm weight of the machine ca. 0,2 t Crjdpfxe Ahzh So Aktsi dimensions of the machine ca. 2,0x 1,0 x 0,9 m Siegmund Welding Table with Steel Plate - Frame made of aluminum profiles - Working height: 900 mm - Perforated plate: high-quality S355J2+N steel, plasma-nitrided and BAR-coated - Borehole diameter: 16 mm - Borehole grid: 50x50 mm - For clamping: manual clamping bolt 160514

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Crjdpfx Akozamffstji Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: used, Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, load capacity: 2,000 kg, arm reach: 2,400 mm, Equipment: documentation/manual, For sale is a like-new IGM RTE 478-S welding robot, manufactured in 2022! This is a 7-axis robot with a 9-meter travel range and two stations, each equipped with a 2-axis L-manipulator with a load capacity of up to 2000 kg. Robot type: RTE 478-S in a suspended position. Control system: Fully digital PC robot control system, type RCE. Welding process: Single-wire welding process. Welding equipment: Digital inverter welding power source TPS 500i. The system can be inspected and tested upon request. The robot was operated in a single-shift operation and has few operating hours! Crodpfs Ad R Eaox Aktoi

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Cjdpfx Aexxvgzskteri Clamping plate diameter: 0.8 meters Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Length 2.0 m, width 1.05 m

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Rated power at 50% duty cycle: 25 kVA Max. welding power: 107 kVA Adjustable reach: 140–500 mm Welding specifications – Steel: 6 + 6 mm Brass: 3 + 3 mm Aluminium: 1.2 + 1.2 mm Adjustable electrode force: 17–278 daN Cooling water flow rate: 4 l/min Weight: 240 kg Welding control unit: DALEX MPS 1036 Operating instructions and electrical diagrams are available Working stroke triggered by pneumatic foot pedal Well-maintained condition Crsdpfx Aks Ahw Upotei

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Crodpfsurlcrjx Aktoi Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: used, AK Techniek HKMP 2T welding positioner -Model: HKMP 2T -Year of manufacture: 04-1991 -Serial number: 2300D -Maximum capacity: 2,000 kg -Power supply: 400V -Control voltage: 24V -Rotation speed: 0–2 rpm -Hydraulic operating pressure: 150 bar -Additional 380V connection on the machine (e.g., for a welding unit) Cods Agnk Iepfx Akteri -Table surface area: 1250 x 1250 mm Brand: ALK Techniek Type: HKMP27 Length: 3800 mm Width: 3200 mm Height: 3000 mm Additional information: Rotating, lifting, and tilting functions; equipped with a remote control