Used Welding Plate for sale (16,526)

Condition: used, For export only! G&J C85 cleaning unit with conveyor Dsdpfx Akj Ahnf So Aecp Stacker also available!

Year of construction: 2016, condition: good (used), Approx. 4 – 5 used plate heat exchangers, Funke, FP. 16-75-1-NH-0: Dodpfx Asz Sdypsk Aocp Price per unit, ex works: €550.00 (net)! Manufacturer: Funke Type: FP. 16-75-1-NH-0 Serial number: 0823902 Year of manufacture: 2016 Condition: good Availability: immediately Location: Bünde, North Rhine-Westphalia

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 97700 € 1846.53 € 2550 mm 15 mm 15 mm 13 mm 12 mm 12 mm 10 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 4760 mm 1660 mm 1155 mm 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device Djdpfxsypbp Dj Ak Aocp hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Dcjdpfx Aju N Dy Sek Aep Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm *

Condition: used, Technical details: floor-plate length: 510 mm Dsdpfx Aju N D Dwek Ajcp plate width: 270 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t Dcjdpfx Akju N D Rds Aop transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 Djdpey Au Eyofx Ak Aocp -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: including documentation, see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: used, Technical details: floor-plate length: 5600 mm plate width: 1890 mm plate height: 1. 335 2, 390 3, 370 mm weight of the machine ca.: 9,0 pro Platte t transport dimensions LxWxH: 5,6 x 1,89 x 335 (390) (370) m 3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distance 315mm Through-hole Number 23 Size D=130 Dedpfx Aju Rl Ugjk Ajcp i.D. *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Dodou Rni Hspfx Ak Aocp Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Technical details: welding current: WIG: 420 A welding current: E: 320 A open-circuit voltage: WIG: 59 V open-circuit voltage: E: 42 V weight of the machine approx.: 11,5 kg dimensions L x W x H: ca. 0,85 x 0,4 x 1,0 m Welding rectifier / inverter, on 4 wheels TIG / electric welding Direct current Dcsdov H Ayhepfx Ak Aop TIG = up to 420 A E = 240 A Protection class IP 23 Air cooling *

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data:   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. Dcedpszpx Ucsfx Ak Ajp   We will be happy to answer any further questions by telephone.

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m 3 units available – price per unit T-slot clamping plate Dimensions: 4000 × 1500 × 450 mm ·6 T-slots Dcsdpfx Aoy Rru Iek Aop ·Heavy-duty design for machine setup, fixture construction and precision machining ·Ideal for milling, drilling and assembly applications *

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height Dodjd Tyaaspfx Ak Ajcp - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Dcedpfx Aodqzbrek Ajp Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters Djdsu U Iixspfx Ak Aocp *

Condition: used, Technical details: floor-plate length: 4500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 3,6 / pro Platte t transport dimensions LxWxH: ca. 4,5 x 1,3 x 0,3 / pro Platte m Dodeval Hdjpfx Ak Aecp There are 2 plates for sale. Material: Cast steel T-slots according to DIN 650 a=21; h=40; b=39.5; c=16mm; center distance T-slot to T-slot = 250mm *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm Dedpfx Akevc Amtj Aocp control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw Dodpfx Aovdczaek Ajcp volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 2006, Technical details: workpiece weight: 1,1 t control: RobAssist über makro-Technik / VME-Bus-CPU Rotary-table: Ø 800 mm rotary table tiltable: 370° Grad table - tiltable: 115° Grad total power requirement: 35 kVA Total weight, approx.: 4000 kg dimensions L x W x H: Roboter: ca. 2,5 x 4,5 x 3,8 m dimensions electric cabinet: ca. 600 x 800 x x2200 mm dimensions L x W x H: Absaufanlage: ca. 0,7 x 0,8 x 2,7 m dimensions L x W x H: Drehmodul: ca. 1,4 x 1,4 x 1,1 m The system is currently in the technical department. Welding robot system consists of: -Gantry with robot: Reis Robotics, RVL20-16.3 kVA, stroke radius max. approx. 1600 mm, speeds = axis 1: 3 m/sec, axis 2: 185°/sec. Axis 3: 150° / sec., axis 4: 450° / sec., axis 5: 450° / sec., axis 6: 500° / sec, -2x columns: Column spacing 3300 mm, columns on base plate 900x900mm; columns Ø 350 mm -Turntable/tilt and turn module: Model RIS, type RDK11 Dcjdpfxjvzq Hrj Ak Aop Torque max. tilting axis = 4,200 Nm and turning axis 2,200 Nm Speed of tilting axis = 19° / sec. and turning axis 45° / sec. -Welding unit: Fronius, type TPS 2700; welding current range: MIG/MAG 3-270 A and electrode 10-270 A as well as TIG = 3-270 A; protection class IP 23 -Welding fume extraction: Teka, type DUST Buster DB-302 R, air volume flow max. 300m³/h, filter class Kategori C, filter area 2.2 m² -Cooling unit: Type FK 4000 R, power 2 kW, protection class IP 23, pressure 4 bar Equipment: -safety light barrier with transmitter and receiver Hand-held programming device *

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Torch head Dcjdpfxsvz Adve Ak Aep Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Condition: used, sheet width 3100 mm Dsdpfx Ake Aa A Hhe Aocp plate thickness 6 mm stroke 160 mm rear stop 1000 mm total power requirement 5,5 kW machine weight ab. 6.500 kg

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel Dedju Icdyopfx Ak Ascp 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: good (used), total height: 890 mm, Tension tower, manufactured by Lang 192 x 192 mm square Height 890 mm or 860 mm, excluding adapter plates Base plate 384 x 384 mm Weight approximately 200 kg Dedsz E Sahjpfx Ak Ajcp Several of these tension towers are available.

Condition: used, machine/vehicle number: 5240, Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Dsdpfxj Ahlkyo Ak Ajcp Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension  ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm

Year of construction: 2020, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: MHTP8, RYWAL MHTP8 Welding Rotator, Head & Tail Stock, 8 t Manufacturer: RYWAL-RHC Sp. z o.o. Type: MOST HEAD TAIL-STOCK-8t Serial number: MHTP8-011 Catalog number: MOST MHTP8 Year of manufacture: 09/2020 Load capacity: 8,000 kg Power supply: 400 V Frequency: 50 Hz Rated current: 25 A Installed power: 9 kW Machine weight: 2,300 kg Technical data: Maximum load capacity: 8,000 kg Rotation speed: 0.2-0.68 rpm Lifting speed: 500 mm/min Maximum torque: 24000 Nm Maximum lifting torque: 862 Nm Vertical adjustment range: 550-1880 mm Plate diameter: 750 mm Max. working diameter: 3600 mm Height: 2550 mm Width: 1000 mm Length: any For sale: MHTP rotator with an 8-ton load capacity, designed for rotating and positioning heavy parts during welding, assembly, and processing of steel structures. Its robust construction and smooth speed adjustment ensure precise and safe operation. The machine is suitable for production plants, shipyards, and companies involved in the production of steel structures. Dedpfxe Ahza Do Ak Aecp The device is in working order, and testing is possible while in operation.