Used Welding Positioner for sale (7,205)

Condition: good (used), Year of construction: 2007, load capacity: 7,500 kg, total height: 1,700 mm, total length: 4,000 mm, total width: 1,600 mm, table width: 1,250 mm, rotary table diameter: 1,250 mm, table load: 7,500 kg, pivoting range: 200 °, input current: 600 A, Welding positioner KISTLER - HP 7500 MACH-ID 9657 Make: KISTLER Type: HP 7500 Year: 2007 Table Length: 1250mm Table Width: 1250mm Table load on 200 mm:7500 Rotation table: 0 - 1° Lifting chuck: 200° Table load:: 7500 Length: 4000mm Width: 1600mm Height: 1700mm Weight: 4000kg Gjdpfx Aljzd T Nqj Uskc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Single-column lifting and rotating device, 5-ton load capacity, mono, mobile, lifting and turning. Protec turning device / positioner Syncrolift. Drive column with adjustable height, remote control (wireless and manual). Electric column adjustment with powered travel carriage. Load capacity 5,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational drive: 2.2 kW. Gkodpfxex Thnpo Al Uec

Condition: good (used), Year of construction: 2005, load capacity: 7,500 kg, total height: 1,700 mm, total length: 2,300 mm, total width: 1,300 mm, table width: 1,250 mm, rotary table diameter: 1,250 mm, overall weight: 3,500 kg, table load: 7,500 kg, Welding positioner KISTLER - R 7500 HP MACH-ID 9655 Make: KISTLER Type: R 7500 HP Year: 2005 Table Length: 1250mm Table Width: 1250mm Table load on 200 mm:7500 Rotation table: 200° Table rotation: 0 - 1U/mm Table load:: 7500 Length: 2300mm Width: 1300mm Height: 1700mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gjdpjzd Tyiofx Al Uekc

Condition: new, Year of construction: 2025, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Gedpfxex Thvye Al Uokc Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: new, Year of construction: 2026, Equipment: documentation/manual, foot remote control, Indexing table, 1500 x 3000 x 200 mm Tabletop thickness: 22 mm, hole diameter: 28 mm with wireless handheld remote control Swivel range: 360° Height adjustment: hydraulic, motor range 800 to 1200 mm Speed: 0.5 RPM Motor power: 0.75 kW We offer the tables in various sizes and load capacities: Load capacity: 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Load capacity: 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, hole: 28 mm, with manual or automatic height adjustment Gedpfx Aljz D Af Sj Uskc

Condition: new, Year of construction: 2026, load capacity: 1,000 kg, Column Lift Rotating Device, 1 Tonne Load Capacity Protec Turning Device / Positioner Syncrolift Double column, remote control – wireless and manual Adjustable columns, mobile Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Rotation speed: 1 rpm Clamping plate diameter: 500 mm Rotation drive: 0.37 kW Versions with load capacities from 2 to 10 tonnes available upon request Gedoyk Tb Ispfx Al Uekc

Condition: new, Year of construction: 2026, CORMAK PS-650 welding positioner is a professional device designed for precise rotation and positioning of welded components in various industrial processes. Thanks to its high load capacity, robust construction, and smooth adjustment of operating parameters, this positioner is an indispensable support tool in facilities involved in welding, assembly, and painting of metal structures. Main advantages of the machine Load capacity of up to 650 kg in horizontal position and 300 kg in vertical position allows handling heavy structural components. Smooth rotation speed adjustment from 0.2 to 1.8 rpm enables precise adaptation to specific welding processes. Table tilting range from 0° to 90° allows welding in the most optimal working position. Compact and stable construction with a robust body ensures safe operation even under high loads. Possibility of mounting a self-centering three-jaw chuck significantly facilitates the clamping of cylindrical components. Design and technology The CORMAK PS-650 welding positioner has been designed with a focus on durability and reliability. The construction includes a brass grounding sleeve, which allows the welding current connection to be transferred directly to the workpiece, ensuring maximum process efficiency. The drive system equipped with a 1.5 kW motor enables smooth and stable rotation of heavy components. The device is equipped with a foot control pedal and a wired hand controller, improving operator comfort and control. Precision and work efficiency The ability to set the table inclination at any angle within a range of up to 90°, combined with precise rotation speed adjustment, allows perfect positioning of the workpiece for a specific task. Rotation in both directions significantly speeds up the welding process and improves the quality of joints, ensuring repeatability and an aesthetic finish of welds. Applications The CORMAK PS-650 welding positioner is widely used in: steel construction plants, production and repair workshops, industries such as mechanical engineering, railway, and shipbuilding, Gkedpfx Alouc Tdqs Usc painting facilities and assembly departments. Thanks to the ability to rotate and position components at the most convenient angle, it greatly improves operator efficiency and reduces production times. Standard equipment CORMAK PS-650 welding positioner Foot control pedal Wired hand controller Power cable Operating manual Optional equipment Self-centering three-jaw chuck for pipes WP500 Self-centering three-jaw chuck for pipes WP600 Technical specifications Parameter Value Horizontal load capacity 650 kg Vertical load capacity 300 kg Table diameter 650 mm Centering hole size 80 mm Table tilting range 0° ~ +90° Rotation speed range 0.2–1.8 rpm Speed adjustment Smooth Overall length 850 mm Overall width 700 mm Overall height 680 mm Gross weight 230 kg Power 1.5 kW Power supply 400 V CORMAK welding positioners are proven and reliable solutions for professional industrial facilities. Increase precision, reduce production time, and improve welding quality with the PS-650 model.

Condition: excellent (used), 3-Axis Positioner, 7 Ton Technical Data: - Maximum load capacity: 7,000 kg Gedsxxw Rnspfx Al Uskc - Faceplate diameter: 1,100 mm - Speed: 0.03 - 1.0 rpm - Minimum table height in horizontal position: approx. 999 mm, maximum 2,218 mm - Minimum table height in tilted position to center: approx. 818 mm, maximum 1,673 mm - Motorized and tiltable/rotatable faceplate - Infinitely variable rotary motion (electric control) - Forward and reverse rotation - Welding current transmission: approx. 1,400 A - Maximum torque: 9,000 Nm - Tilting angle: 135° - Drive: 400 V - Power supply: 3 x 400 V - Handheld remote controller for rotation direction and tilting - Dimensions (L x W): approx. 2,620 x 1,490 mm - Weight: approx. 3,500 kg

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Gkjdpfx Aox Thq Rol Uoc Rotation 0.75 kW Torque 5180 N-m 2 to 10-Ton Capacity Available Upon Request

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner, load capacity 2 tons, with infinitely extendable clamping extensions and clamping claws included. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 amps. Dimensions: Length: 1940 mm, Width: 1200 mm, Table diameter: 1200 mm. Height when tilted: min. 700 mm, max. 1550 mm. Height horizontal: min. 900 mm, max. 1700 mm. Weight: 1750 kg. Gkodpfx Alex Tif As Uoc

Condition: new, Year of construction: 2026, CORMAK PS-360 Welding Positioner The CORMAK PS-360 welding positioner is a high-quality rotary positioner designed for professional industrial applications. Developed with ergonomics, efficiency, and precision in mind, it is an essential support tool for welding and assembly of cylindrical components, pipes, and parts with complex geometries. It enables efficient manipulation of workpieces, allowing welding in the optimal position, which significantly improves weld quality and operator working conditions. Main advantages of the machine Professional welding positioner with adjustable rotation speed and tilting function of the working table. Gkedpfx Alsrigl Uo Usc High load capacity: up to 100 kg in horizontal position and 50 kg in vertical position. Smooth rotation speed adjustment: from 0.2 to 5 rpm, suitable for precise TIG and MIG/MAG welding processes. Compact design: ideal for workshops, production lines, and automated welding stations. Ground connection slot: ensures a continuous electrical connection without the need to change the ground connection after each rotation. Design and technology The PS-360 welding positioner has been designed for intensive industrial operation. The robust steel frame ensures excellent stability and rigidity, while the manual tilting mechanism allows the working table to be positioned at an angle of up to 90°. A 120 W motor provides sufficient torque for handling heavy cylindrical and tubular components. The control system consists of a control panel and foot pedal, allowing the operator to maintain full control over the welding process. Precision and work efficiency Using the CORMAK PS-360 positioner significantly improves weld accuracy and repeatability. Welding in a fixed, ergonomic position reduces the risk of operator errors and eliminates the need for frequent repositioning of components. Smooth speed adjustment allows the rotation speed to be matched to the specific application, making the PS-360 an excellent solution for both precise TIG welding and more dynamic MIG/MAG welding processes. Applications The PS-360 welding positioner is used in a wide range of industrial production and assembly processes: Welding of pipes, flanges, shafts, and cylindrical components Production and repair facilities – welding and assembly lines Welding, painting, and mechanical industries Robotic and automated welding stations Standard equipment CORMAK PS-360 welding positioner Foot control pedal Power cable Welding torch holder mast User manual Optional equipment Self-centering three-jaw chuck WP200 Self-centering three-jaw chuck WP300 Technical specifications Parameter Value Horizontal load capacity 100 kg Vertical load capacity 50 kg Working table diameter Ø360 mm Tilting angle 0° ~ +90° Rotation speed 0.2 ~ 5 rpm Motor power 120 W Tilting adjustment Manual Voltage 220 V – 1PH – 50 Hz Dimensions 530 × 550 × 500 mm Weight 49 kg Note: The three-jaw chuck is not included in the standard package.

Condition: new, Year of construction: 2026, CORMAK PS-500 Welding Positioner The CORMAK PS-500 welding positioner is a versatile auxiliary device designed for a wide range of production applications. Its extensive capabilities make it an excellent solution wherever precise manipulation of components is required. The welding, painting, and mechanical industries appreciate the quality, durability, and functionality of CORMAK positioners. These devices are the ideal choice for applications where components or assemblies need to be rotated, wound, or positioned. Additionally, the machine is equipped with a tool holder adjustable in multiple planes, increasing its versatility and ease of use. Main features Rotation switch and direction selector – allow precise control of the rotary table rotation direction. Smooth speed adjustment – enables adjustment of table rotation speed according to specific work requirements. Compact construction – a robust and rigid design ensures durability and long service life. Foot control pedal – provides convenient and precise operation control. Thermal protection fuse – additional protection against overheating. Brushed motor – efficient and versatile, suitable for various industrial applications. Table tilt range of 0–90° – enables welding in different working positions. Possibility of mounting a centering chuck – supports accurate positioning and alignment of components. Universal grounding slot – allows connection of the welding ground without reconnecting it after each table rotation, improving convenience and work efficiency. Advantages Higher productivity – improves the efficiency of assembly and welding processes. Reduced production costs – automated component rotation contributes to savings. Repeatable weld quality – ensures consistent and uniform results. Operational flexibility – adjustable speed and rotation direction make the device suitable for many applications. Improved working conditions for welders – enables more comfortable and ergonomic working positions. Godpfx Alsrigmgo Uokc Standard equipment includes PS-500 welding positioner Foot control pedal Power cable User manual Welding torch holder mast Optional equipment Self-centering three-jaw chuck for tubes WP400 Self-centering three-jaw chuck for tubes WP500 Technical specifications Parameter Value Horizontal load capacity 300 kg Vertical load capacity 150 kg Working table diameter Ø500 mm Centering hole diameter 140 mm Tilting angle 0° ~ +90° Rotation speed 0.2 ~ 2.5 rpm Motor power 200 W Tilting speed Manual Voltage 220 V – 1PH – 50 Hz Dimensions 700 × 650 × 710 mm Weight 97 kg Note: The three-jaw chuck is not included in the standard package. The CORMAK PS-500 welding positioner is an indispensable tool for the welding industry, significantly simplifying the rotation and positioning of components while improving work quality, efficiency, and operator comfort. The WP400 and WP500 self-centering chucks are perfectly suited for the PS-500 welding positioner. These advanced solutions provide precise and stable component clamping, significantly improving welding quality and productivity. Choosing these chucks ensures comfortable operation and excellent results.

Condition: new, Year of construction: 2026, CORMAK PS-310 Welding Positioner The CORMAK PS-310 welding positioner is a professional tool designed to support welding and assembly processes in industrial facilities. Combining precision with high functionality, it is an indispensable solution wherever accurate rotation and positioning of components are required. Thanks to adjustable tilting angle and rotation speed, the PS-310 welding positioner provides effective support for the operator, improving weld quality, reducing production cycle times, and increasing overall process efficiency. Gsderigk Nepfx Al Ujkc Main advantages of the machine High working load capacity: 30 kg in horizontal position and 15 kg in vertical position, allowing operation with various components. Ø310 mm working table: provides stable mounting of workpieces with different dimensions. Smooth rotation speed adjustment: from 1 to 15 rpm enables precise adaptation to the welded component. Adjustable tilting angle 0°–90°: allows the operator to work in the most ergonomic position. Durable construction: compact steel body resistant to workshop loads and intensive use. Full process control: rotation direction switch, thermal protection, brushed motor, and foot pedal control. Ground connection slot: simplifies connection of the welding ground without the need to switch it during rotation. Design and technology The CORMAK PS-310 welding positioner has been designed for intensive operation. The rotary table with a diameter of 310 mm allows installation of a wide range of welding fixtures and components. The drive system is based on a 120 W brushed motor, ensuring stable operating parameters even under load. Manual tilt adjustment allows positioning of the table within a range of up to 90°. Control elements, including the foot pedal and switch panel, are ergonomically positioned and intuitive to operate. The built-in thermal protection system prevents overheating and increases the service life of the device. Precision and work efficiency Precise adjustment of the table rotation speed in the range of 1–15 rpm allows the operator to adapt working parameters to the type of weld being performed. The rotation direction change function enables optimization of the welding path. Welding positioners from this series improve weld quality, reduce errors, and shorten operation times. Repeatable positioning of components ensures consistent technological processes. Applications The PS-310 welding positioner is an excellent choice for production plants, service workshops, welding facilities, and companies involved in assembling cylindrical components, pipelines, tanks, and frames. The device is widely used in industries such as: structural welding, boiler and tank manufacturing, painting industry, valve and fittings production, assembly of pipes and steel components, production process automation. Standard equipment CORMAK PS-310 welding positioner Foot control pedal Power cable Welding torch holder mast User manual Optional equipment Self-centering three-jaw chuck WP200 Self-centering three-jaw chuck WP300 Technical specifications Parameter Value Horizontal load capacity 30 kg Vertical load capacity 15 kg Working table diameter Ø310 mm Tilting angle 0° ~ +90° Rotation speed 1–15 rpm Motor power 120 W Tilting adjustment Manual Voltage 220 V – 1PH – 50 Hz Dimensions 500 × 500 × 440 mm Weight 34 kg Note: The three-jaw chuck is not included in the standard package.

Condition: used, Welding turntable – welding rotating device with enclosure Circular welding device Load capacity approx. 50 kg Turntable diameter 300 mm Turntable speed 1.0-15 rpm Gkjdpfx Ajdzp U Iol Uec Mains connection 230 volts, 50 Hz - Plan spiral turntable with internally stepped jaws - Infinitely variable speed control via potentiometer - Drive via geared motor, rotation direction: left - Start via electrical switch - Welding current transfer via sliding contact - Extraction port Ø 160 mm - Interior lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Space required W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: new, Year of construction: 2026, CORMAK PS-180 welding positioner is a compact, precise, and reliable welding turntable designed for assembly and welding operations in production workshops, metalworking facilities, and repair departments. Thanks to precise speed adjustment, a robust construction, and a wide range of working table inclination, this positioner significantly improves operator efficiency and comfort. It provides a safe and controlled solution for welding cylindrical components and parts with complex geometries. Main advantages of the PS-180 welding positioner High-precision welding turntable – enables accurate positioning of workpieces within a range of 0–90°. Adjustable rotation speed from 1 to 8 rpm – allows the working speed to be adapted to the type of weld and welding technology. Foot control pedal included – provides dynamic control over table rotation and movement direction in real time. Ø200 mm working table – equipped with mounting grooves for easy installation of chucks, clamps, and workpieces. Universal grounding slot – enables continuous connection of the welding ground without the need for reconnecting during rotation. Compact dimensions and low weight – easy integration into existing workstations and quick repositioning when required. Design and technology The CORMAK PS-180 welding positioner was designed with ergonomics and durability in mind. The robust housing made of high-strength steel ensures resistance to demanding operating conditions, while the working table design allows precise mounting of components with various shapes. The manual tilting system with a range of 0–90° allows the workpiece to be positioned in the optimal welding position. The rotation system is powered by a 15 W motor and provides smooth adjustment of rotation speed, significantly increasing operator flexibility and process control. Precision and work efficiency CORMAK welding positioners enable achieving the ideal welding position, resulting in higher weld quality and fewer technological errors. Thanks to automatic rotation of components and stable workpiece mounting, the operator can focus on welding technique, achieving consistent and aesthetically pleasing joints. This solution significantly improves productivity and reduces operator fatigue by eliminating the need for manual handling of components during welding operations. Applications The PS-180 welding turntable is particularly suitable for: welding cylindrical components such as tanks, pipes, sleeves, and flanges, precise assembly of components along the axis of rotation, orbital and TIG welding processes where precise speed control is essential, Gkodpfx Aorigkpjl Ujc production processes requiring partial automation, handling lightweight components in limited working spaces. Standard equipment Ø200 mm working table with mounting grooves Foot control pedal Grounding slot for welding cable connection Manual tilting mechanism 0–90° Built-in inverter for rotation speed control Technical specifications Parameter Value Horizontal load capacity 10 kg Vertical load capacity 5 kg Working table size Ø200 mm Tilting angle 0° ~ +90° Rotation speed 1–8 rpm Rotation motor power 15 W Tilting system Manual Voltage 220 V-1PH-50HZ Dimensions 260 × 320 × 280 mm Weight 10 kg The three-jaw chuck is not included in the set.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, Gksdpoxlr Tdsfx Al Uec air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical specifications: - Load capacity approx. 200 kg - Outreach 800 mm Gedpfx Aledd Ilxj Uokc - Working height in horizontal position approx. 1000 mm - Boom arm can be rotated to the left and right by motor - Boom arm can be tilted manually - Grinding wheel can be rotated to the left and right by motor - Grinding wheel speed can be adjusted continuously - Grinding wheel diameter 300 mm - Swiveling control panel with ESAB control unit, - Type 6 PTF, year of manufacture 1997 - Space required approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: A self-contained, dedicated tooling system designed for a specific operation within an automated production line. It features a robust, open central frame and standardized, heavy-duty mounting units. The tool directly interfaces with industrial robots in a thermal hazard zone, incorporating advanced installation safety features and a dedicated system for dissipating stray currents. COMPONENT LIST: 1. DESTACO brand main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle indicator (range 5-135°) to facilitate collision-free loading. Gksdpfxsz Ng N Ts Al Ujc 2. Eye bolts (lifting lugs) – 4 pieces. 3. Copper grounding blocks (welding grounding) – approximately 2 connection points. Thick copper connections protect the electronics and positioner bearings from welding current. 4. Electro-pneumatic junction box (I/O connection box) – 1 piece. A collective housing for signals from inductive sensors, facilitating communication with the PLC controller. 5. Base blocks (NC blocks) with an X, Y, Z coordinate plate – approximately 25 pieces. Base pillars (so-called shims) guaranteeing perfect spatial positioning of the part. 6. Pneumatic installation in red protective sleeves – a complete supply line hidden within fire-resistant covers, safely routed inside the profiles and through edge feedthroughs. 7. Base frame with a process stand – 1 set. Consists of a galvanized working frame and a black service stand for offline maintenance tasks.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, Gkjdpfov Uzf Eox Al Ujc - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of input current: three-phase, total height: 1,420 mm, total width: 560 mm, total length: 1,100 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 100 kg, warranty duration: 12 months, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, DGUV certified until: 08/2027, welding power (max.): 19 kVA, open-circuit voltage: 61 V, welding current at 60% duty cycle: 470 A, welding current at 100% duty cycle: 420 A, space requirement height: 1,770 mm, space requirement width: 600 mm, space requirement length: 1,250 mm, input current: 30 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 500 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, We are offering this Böhler Welding TERRA NX 500 PME Rockstar welding machine, a showroom model from 2025, for sale. Gsdpfx Aszvmi Iol Uokc The package includes a wire feeder, a 1.5m intermediate hose set, a 4m UP/Down welding torch, and a ground cable. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2008, load capacity: 7,500 kg, Max. tool width: 3300mm Max tool height: 1630mm Table size: 1400x380mm / side Godpfx Asup Aapsl Uekc Cas27Wn8Iy Load capacity: 15000 kg Turning load capacity: 7000 kg

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; Godpfx Alozimbke Ujkc submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Gksdpsrl S Ufsfx Al Ujc Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: new, table length 1200 mm table width 800 mm table height 900 mm table load 2000 Kg weight of the machine ca. 0,24 t dimensions 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. Gkedpfx Asfg U S Esl Uec height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: excellent (used), Wire electrode, stainless steel welding wire, welding wire -Large roll -Wire thickness: 1.2 mm Gsdpfx Asd Elvvel Uekc -Wire electrode: high-alloy, chemically resistant -Number: 2x casters available -Price: per package -Weight: 12 kg