Used Wet Cutting Table for sale (27,232)

Condition: good (used), Year of construction: 1990, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,500 mm, table width: 1,500 mm, feed rate X-axis: 2,800 m/min, feed rate Y-axis: 2,800 m/min, feed rate Z-axis: 2,800 m/min, rotational speed (min.): 1,120 rpm, Table type boring mill TOS VARNSDORF - W100A MACH-ID 9351 Make: TOS VARNSDORF Type: W100A Year: 1990 3 axis TESLA NS 114  digital read out Tailstock Face plate 800 mm Distance faceplate to boring bar rest 2800 mm Max. diameter off facing 900 mm Under power inspection possible Nkedpfsycvc Sjx Af Iot X - Travel: 1600mm Y - Travel: 1120mm Z - Travel: 1250mm W - Travel: 900mm Table Length: 1500mm Table Width: 1500mm Table load: 3000 Speeds / ranges:1120Rpm Power: 11kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:2800mm/min. Feed rate Y-Axis:2800mm/min. Feed rate Z-Axis:2800mm/min. Feed rate W-Axis:2800mm/min. Length: 6710mm Width: 3000mm Height: 3000mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm Nkjdpfx Asuy H Nqjf Ist - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Voltage [V]: 400 Nodpfx Afjxdlx Rj Iekt - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total height: 1,900 mm, total length: 1,800 mm, total width: 1,800 mm, - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 388 - Main motor power [kW]: 6.0 - Max. saw length [mm]: 9500 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 9000 - Output table length [mm]: 3650 - Voltage [V]: 400 - Power [kW]: 6.0 - Transport dimensions: 1800mm x 1800mm x 1900mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT Nkedpsxzgrgsfx Af Iet VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: not inspected (used), functionality: unexamined, Year of construction: 2009, operating hours: 69,572 h, machine/vehicle number: 28510308, sheet thickness (max.): 20 mm, table height: 940 mm, travel distance X-axis: 3,270 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, No reserve price – guaranteed sale to the highest bidder! Auction of an Amada laser cutting system + LKI storage tower! Placing a bid obliges the buyer to collect the equipment within the specified timeframe between 23.03.2026 and 27.03.2026! AMADA LC-3015 F1 NT TECHNICAL DETAILS Travel Range X-axis: 3,270 mm Travel Range Y-axis: 1,550 mm Travel Range Z-axis: 100 mm Travel Range B-axis: 21 mm Cutting Area X-axis: 3,070 mm Cutting Area Y-axis: 1,550 mm Cutting Area Z-axis: 100 mm Cutting Speed X/Y: 0 – 60 m/min Rapid Traverse X/Y/Z: up to 120 m/min Table height: 940 mm Workpiece weight: 920 kg Sheet thickness mild steel: up to 20 mm Sheet thickness stainless steel: up to 12 mm Sheet thickness aluminum: up to 10 mm MACHINE DETAILS Control: AMNC-F Control type: CNC path control Controlled axes: X, Y, Z, B Simultaneously controlled axes: X, Y, Z Laser model: FANUC AF4000i-B Laser type: CO₂ laser Laser class: 4 Laser radiation: invisible Laser principle: AC-HF excited, fast axial flow Rated power: 4,000 W Max. power: 4,000 W Peak power: 5,000 W Stability: ±2 % Frequency range: 5 – 2,000 Hz Pulse duty cycle: 0 – 100 % Wavelength: 10.6 µm Laser beam diameter (output): 27 mm Laser beam divergence: < 2 mrad Cooling & Supply Chiller throughput: > 160 l/h Power supply: 55 kVA Positioning laser Laser class: 3R Laser radiation: visible Rated power: < 5 mW Pulse duration: CW Wavelength: 0.6 – 0.7 µm Laser medium: Semiconductor or HeNe Drive type: Linear drives Cutting gas regulation: automatic Machine weight: approx. 11,000 kg LKI ASLUL 300 F1 Storage Tower (Year of manufacture: 2009) TECHNICAL DETAILS Cycle time: approx. 3 min Pallet changeover time: approx. 50 s Raw sheet / unload pallets: 2 + 4 or 3 + 3 Maximum pallet weight: 3,000 kg Sheet size: max. 3,000 × 1,500 mm Sheet size: min. 2,000 × 1,000 mm Material thicknesses Automatic mode: 0.8 – 20 mm Shuttle mode: 0.8 – 25 mm Load data Sheet weight: max. 920 kg Load on cutting pallet: max. 920 kg Stack heights Raw sheet pallet stack height: max. 150 mm Unload pallet stack height: max. 220 mm Finished part size Finished part size (X × Y), free cut: min. 225 × 180 mm MACHINE DETAILS PLC: Mitsubishi Q-Series Operator interface: Beijer E1060 Dimensions & Weight Dimensions (L x W x H): approx. 4,630 x 4,225 x 6,000 mm Total weight: approx. 11,000 kg EQUIPMENT Double sheet detection Nkjdpfx Asycqfuef Iet Overall dimensions (Amada + storage tower) Overall dimensions (L x W x H): approx. 11,000 x 10,000 x 6,000 mm Total weight: approx. 22,000 kg SCOPE OF DELIVERY Available manuals Note: The power supply displays an error message. It may be defective.

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable Nksdpfjycfyaex Af Iet -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: AB/166667 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Manually adjustable axes: Scoring unit height Nedpexdlxkofx Af Iekt - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8500 - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 Nedowq U Dxspfx Af Iokt - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2014, with changing table (without automtic storage) ByVision Touchscreen and manual control unit In contrast to the CO2 ByStar, the ByAutonom can change the cutting heads and cutting nozzles automatically. At the very end, only a BySprint could do that and then the new Fiber again. This means I can cut thick and thin material one after the other and the machine gets the right cutting head. Njdpfxsqmmkcs Af Iskt Technische Daten / technical details: Laserleistung / laser capacity 6 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Blechgröße x,y / sheet size x,y 3000, 1500 mm Schneidbereich x,y,z, / cutting area x,y,z 3048, 1524, 80 mm Antriebsleistung / drive capacity 51 kW Gewicht ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis Nkjdpfxjyclvno Af Iet - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: repair required (used), Year of construction: 1987, functionality: limited functionality, Table milling machine with 2 milling spindles Table size: 1,500 x 800 mm Extendable rail on the table, length 2,500 mm Rail extendable up to approx. 640 mm from table front edge 2 extension pieces for the rail, each L = 850 mm Spindle diameter: 30 mm Usable spindle length approx. 140 mm Spindle 1 height-adjustable with mechanical digital display Nkedeycq Ayspfx Af Ist Spindle 2 height- and side-adjustable, with mechanical digital displays Max. tool diameter approx. 180 mm Distance between spindles approx. 550 mm Milling spindle locking mechanical via lever 2 motors, each 4.5 / 5.5 kW Motors with pole-changing function Forward/reverse operation 6 spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Pneumatic milling spindle braking 2 extraction ports, diameter 120 mm Connection data: 400 V, 50 Hz, 3 Ph, N Additional notes: + Spindles heat up during operation. Therefore, likely necessary to replace bearings (not included in price) + Table insert rings for milling spindles are missing.

Condition: used, Gullotine Wohlenberg WP 115 MCS-2 TV with Light guard and air bed. Schneidmaschine / Gullotine Wohlenberg WP 115 MCS-2 TV Baujahr / Year 1994 - Serial-No. 3563-009 Schnittbreite / Cutting width max. 1150mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Njdpfeyc Ul Eox Af Ijkt On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 525 mm, lifting height: 885 mm, empty load weight: 1,600 kg, load capacity: 5,000 kg, overall weight: 1,600 kg, total length: 2,500 mm, total width: 2,000 mm, table width: 2,000 mm, Max. load: 5000 kg Min. height: 525 mm Max. height: 885 mm Platform size: 2000 x 2500 mm Featured with: - Handheld controller Country of origin: Germany Motor power: 4 kW Njdpfsyat Uysx Af Iokt Machine LxWxH: 2000 x 2500 x 525 mm Machine weight: 1600 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function Njdpfxex I Agpo Af Iokt -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Condition: not inspected (used), table width: 450 mm, table length: 630 mm, T-slots 18 mm. Nksdpfx Ajya Hu Hjf Iet

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Nodpfx Aforkntcs Ijkt Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: used, Year of construction: 1978, total length: 3,400 mm, total width: 1,850 mm, total height: 1,600 mm, - Year: 1978 - Documentation available: No - CE certificate present: No - Serial number: 78-11-11 - Roller table length [mm]: 3200 - Table width [mm]: 1070 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Cutting height, Scoring unit height - Options: Scoring unit - Spindle speed: Nkjdpfx Asyazbbef Ijt - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1850mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Catalogue No.: 7858 ADVANTAGES – Polish production – for cross-cutting packages or round timber – unpainted – mobile, on wheels – used saw, in very good condition TECHNICAL DATA Nksdpfjx I Edqjx Af Ijt guide bar length: 2100 mm cutting length: 1900 mm automatic lubrication of the cutting system damping and tension system in the head manual guide bar feed electric motor: 7.5 kW transport dimensions (L/W/H): 1900x900x2710 mm total weight: 205 kg Net price: 28,900 PLN Net price: 6,880 EUR (based on exchange rate 4.2 EUR) (Prices may change in the event of significant fluctuations)

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 5561703, Format (cm): 76 Nodpfxoydcuqo Af Iskt Equipment / Additional information: Side tables, air table, 1x reserve knife

Condition: used, Year of construction: 2008, CNC gantry plasma cutting machine with oxy-fuel Manufacturer: ESAB Model: SXE P1 4500 Nkedpfoyc Nclox Af Ijt Year of manufacture: 2008 CNC control 3 oxy-fuel torches 1 plasma torch with Kjellberg HiFocus 160i power source Without table and filter! 25126

Condition: good (used), Code: 0065 Nkedev Rf Agopfx Af Ist Brand: STOERI MANTEL - CZECH REPUBLIC Model: KP 500 OPTIM - CE Standard Electronic pusher cut-off line with optimisation and defection of wood, suitable for joinery workshops, wooden joinery, semi-finished wood products, furniture, wooden packaging, garden furniture, parquet, and various - CE Standard Blade diameter mm 500 F30 Max revolutions 5000 Motor power Hp 7,5 Adjustable displacement speed Adjustable blade height Max precision tolerance +/- 0,5 mm Frontal pneumatic workpiece holding pressure Integrated control panel Control software SM OPTIMAL Working table height mm 850 Max cutting height mm 130 Loading device Table loading capacity up to mm 6000 Working table inclination 8° Movement speed mt/min 0-15 Return movement speed mt/min 0-100 Control unit AC SERVO Linear axis with integrated toothed belt Outfeed table Outfeed table length mm 2500 Workpiece ejector Suction ports N° 2 diameter mm 120 Compressed air 8 bar Overall dimensions of assembled machine mm 8300 x 1000 x 1700 h Overall dimensions for transport : Machine mm 1100 x 1150 x 1700 h - Pusher mm 6800 x 800 x 1200 h - Outfeed table mm 2550 x 550 x 900 h Weight kg 1500

Condition: good (used), Code: 0285 Njdpsydk Rtsfx Af Iekt Brand: ALTENDORF Model: F 45 - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of wood materials, furniture, custom furniture, window frames , doors, panels, plastics, composite materials, aluminum and various - CE Standard Technical data: Aluminum carriage length mm 3200 Hydrualic blade lifting and tilting with foot pedal operation Cutting width parallel guide mm 1300 Max blade diameter mm 400 F30 Cutting height with blade at 90° mm 125 Cutting height with blade at 45° mm 90 Motor Kw 5,5 Electrically adjustable in height and width scoring unit - Blade diameter mm 120 - Motor Kw 0,75 Digital display of the number of revolutions Digital display of the degree of inclination Speed rpm 3000/4000/5000/6000 Control elements on both sides of the carriage Worktable extension Register ‘DUPLEX’ for making square cuts from 0 to 90° with high precision and continuous adjustment Parallelogram protective cover Overall dimensions of assembled machine: mm 3300 x 3200 x 1450 h Overall dimensions for transport: mm 3300 x 2000 x 1450 h Weight kg 1000

Condition: used, • With automatic loader with 1 storage position on the right Nksdpfx Asyc Uumef Ist • The L-frame on the right is also part of the system • Automatic cutting table that can also cut shapes • Conveyor belt • Year of manufacture (as per nameplate): 2002 • Serial No.: 5000226 • Type: TFE 65-S • Breaking table • With breaking bars for longitudinal and cross breaking • Cutting table and breaking table with powerful air cushions • Weight of the entire system approx. 12,000 kg Price negotiable: €15,000

Condition: excellent (used), Year of construction: 1983, Used machine M.Nr. V130296 Year of manufacture: 1983 Motor data: 380 V - 50 Hz - 13 A Rigid 30 mm spindle Height adjustment via handwheel Forward/reverse operation Extraction ports: 1 x 140 mm - 1 x 100 mm Max. cutter: 250 mm diameter - Max. slotting tool: 400 mm diameter Speed: 3000/4500/6000/9000 rpm Table length: 1200 mm Table dimensions: 900 mm x 280 mm Weight approx.: 950 kg Haffner 3-roller feed Top milling fence with fine adjustment External dimensions W/D/H approx.: 1250/1200/1400 mm Nodpfx Afjyb T T Eo Iskt Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1990, Lumsden 92ML Rotary Surface Grinder 48" Magnetic Chuck Year 1990 - Latest ones made Segmental wheel diameter - 711mm / 28" Segments per set - 12 Table diameter and grinding capacity - 1219mm / 48" Max height of wheel to table - 572mm / 22.5" Min height of wheel to table - 114mm / 4.5" Max height of wheel to magnetic table - 457mm / 18" Spindle speed 550rpm Table speeds - 18 & 6 rpm Automatic feed 10 rates - 0.1 - 1.0mm/min (0.004 - 0.040 ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 50-75hp at 960rpm Table motor - 6 /.5hp at 1440/480rpm Feed motor - 0.25hp at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Nkjdpfx Afovwc I Hj Ijt Overall height of machine - 3048mm Floor space 4394 x 3353mm Weight approx 12,200kgs / 12ton