Used Whole Log Chipper for sale (2,410)

Condition: good (used), Year of construction: 1996, Single-shaft shredder with push floor Rotor width: 820 mm Rotor diameter: 368 mm, with 40 blades 18.5 kW motor Screen size: 20 mm In fully functional condition, ready for immediate use. Lsdszrlu Uspfx Akqjru

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,500 kg, fuel type: electric, – Year of manufacture: 2012 – DTR, CE certified – Capacity: up to 20 m³/h TECHNICAL SPECIFICATIONS: – Inlet width: 500 mm – Inlet height of the feeder: 180 mm – Diameter of the knife shaft: 450 mm – Width of the knife shaft: 515 mm – Power of the main motor: 45 kW – Number of knives: 3 pcs – Knife length: 515 mm – Toothed pull shaft (bottom) – Power of the motor for the bottom toothed pull shaft: 2.2 kW – Toothed pull shaft (top) – Power of the motor for the top pull shaft: 2.2 kW – (Length / Width) of the belt feeder: 5000 x 500 mm – (Length / Width) of the receiving belt table: 3500 x 470 mm – Belt feed, forward/backward – Screen dimensions: 50 x 50 mm Transport dimensions: Lsdpfx Ake Aa Iuksqoru – Length: 700 cm – Width: 240 cm – Height: 220 cm – Weight: ~2500 kg

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, overall weight: 11,500 kg, transport length: 11,800 mm, input voltage: 380 V, transport height: 2,200 mm, transport width: 2,400 mm, Equipment: documentation/manual, PRIMULTINI SE-CEA-IEA 1100 RIGHT-HAND LOG SAWMILL with loader and unloader 1) SE 1100 COLUMN 1100×120 mm flywheels for 130×7500 mm blades electric blade tensioner and blade guide 60 hp engine with automatic starter 2) CEA-IEA CARRIAGE Lodpfx Aez Rvdpokqeru 4 vices with electric clamping and release vice opening 900 mm 3 hydraulic log turners electric spacers with two speeds hydraulic feed with cable rail length 16.5 m control panel 3) COMPLETE AUTOMATION INCLUDING: - 5000 mm 3-way log loader with 4 loading arms - unloading system with 6500 mm motorized conveyor with helical rollers (for side or longitudinal unloading) with 2 pneumatic log handling arms 4) FOUNDATION DRAWING AND OPERATION AND MAINTENANCE MANUAL - disassembled by specialized technicians, ready for loading - transport dimensions: open-top semi-trailer or 40″ open-top container - weight 11,500 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 8,884 h, functionality: fully functional, mileage: 68,462 km, power: 397.17 kW (540.00 HP), first registration: 03/2014, overall weight: 32,000 kg, fuel type: diesel, color: green, axle configuration: 8x4, fuel: diesel, brakes: retarder, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, fog lights, trailer coupling, truck registration, Very well-maintained, fully functional wood chipper. Man TGS 35.540 8x4 with Adblue, Chippo 5010 dT, rotating model. 4272 rotor operating hours. Ledpoz E S Swofx Akqeru

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, Equipment: cabin, documentation/manual, Log sawing line: Lredpfxszwf Nco Akqsu 1) WRAVOR band saw, model WRC-1250 2) Circular saw for edging and trimming with 3 movable blades and one fixed blade with PLC, model WRAVOR 20/120 3X 3) Wravor conveyors for removing lumber from the band saw, transferring to the edging machine, feeding into the edging machine, and a conveyor with left-right discharge at the outlet of the edging machine, plus a log feeding ramp for the band saw. The equipment can also be sold separately (either just the band saw or the edging machine). For sale: complete WRAVOR log sawing line, model WRC-1250 Wravor Sawmill Machinery, manufactured in 2019: 1) Wravor band saw WRC 1250 2) Circular saw for edging and trimming with 3 adjustable blades and one fixed blade, model WRAVOR 20/120 3X 3) Conveyors (log loading ramp, lumber discharge conveyor from the band saw, transfer to the edging machine, infeed conveyors for the edging machine, conveyor with left-right discharge at the outlet of the edging machine) Price for the entire line: 145,000 euros + VAT. The equipment can also be sold separately; for more details, please call:

Condition: excellent (used), CATALOGUE NUMBER 7610 Technical data: - inlet width 410mm - inlet height 140mm - roller width 430mm - roller diameter 400mm - number of knives 2 pcs - screen dimensions 80x130mm - top roller, grooved - bottom 2 rollers, grooved - feed belt length 2850mm - feed belt width 390mm - auto-reverse - main motor 30kW - feed motor 2 x 2.2kW - machine dimensions (L/W/H) 4800x1550x1200mm - weight approximately 2200kg ADVANTAGES - Made in Poland - Auto-reverse - With feed conveyor - DTR documentation Ledjztq Uvjpfx Akqjru - Used shredder, very good condition Net price: 75900 PLN Net price: 17651 EUR Net price calculated using the exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, maximum load weight: 15,230 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2011, * Wood trailer * Achleitner 2-axle trailer * Type: 2ANR18 * Trailer * Body: Stake body * Color: White * Tare weight: 2,760 kg * Maximum permissible total weight: 18,000 kg * Technically permissible total mass: 18,000 kg * Payload: 15,240 kg * Axles: 2 * Permissible axle load: 9,000 kg per axle * Tires: 265/70 R19.5 Lredozqiv Hepfx Akqou * Year of first registration: 07.11.2011

Condition: excellent (used), CATALOGUE NUMBER 7611 Technical specifications: - inlet dimensions: 460x180mm - outlet diameter: 300mm - roller width: 550mm - roller diameter: 350mm - number of blades: 10 pcs - blades arranged in 2 rows - automatic reversing - blade setting device - screen diameter: 30mm - top and bottom conveyor belt - lower drive roller - length of the feed conveyor belt: 4400mm - main motor: 37kW - top feed motor: 1.5kW - bottom feed motor: 2.2kW - dimensions (L/W/H): 6100x1150x1000mm - weight: approximately 3500kg ADVANTAGES - Made in Germany - Automatic reversing - Top and bottom conveyor belt - Blade setting device Lredpfjzruibsx Akqeu - Very good condition - Used shredder Net price: 98,900 PLN Net price: 23,000 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may be subject to change in the event of significant exchange rate fluctuations)

Condition: used, maximum load weight: 14,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2019, loading space length: 6,180 mm, loading space width: 2,300 mm, Equipment: ABS, * ABS * 5-chamber tail lights Ljdpfxo Ad Snve Akqeru * Duomatik air connection * Aluminum rims * SAF axles * Disc brakes ----Superstructure: Short timber structure with 4 Exte D5 2.4 (2.40 high) pairs of stanchions, adjustable drawbar, 40 mm eye, 15-pole electrical connector. For sale to commercial businesses only. IN THE EVENT OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE. INCLUDES EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, proforma invoices, orders, and sales discussions.

Condition: good (used), LOG DEBARKING MACHINE HÄWA / HÄRDTLE For sale: an industrial log debarking machine from the German company Maschinenfabrik Härdtle OHG. The machine is designed for debarking logs in industrial applications. It features a robust, heavy-duty construction suitable for working with large logs. TECHNICAL DATA: • Manufacturer: Maschinenfabrik Härdtle OHG – Germany Lrsdpfez E Dmgox Akqeu • Brand: Häwa • Type: 249/800/22 AB/H • Serial number: 3428/1 • Year of manufacture: 1989 • Diameter of logs to be processed: 250–1100 mm • Log length: 1800–4000 mm • Maximum log weight: 3000 kg • Feed speed: 0–60 m/min • Power supply: 380 V • Frequency: 50 Hz • Total power: 35 kW • Required air pressure: 8–10 bar • Air consumption: approx. 100 l/cycle

Condition: good (used), functionality: fully functional, For sale: a log feeding line with a turner (Interlog AB). The complete line includes: Log feeding conveyor, length 43 meters Metal detector Log conveyor Log turning device Log dropping conveyor Hydraulic unit and hydraulics All existing electrical and electronic equipment belonging to the line Lredpfx Asz Az Awskqeu The line has been dismantled and packed into transport packages (a total of 3 loads). The individual components can also be sold separately. The line is located in Sweden. Please contact us, and we will gladly answer your questions and provide you with a good offer!

Condition: used, empty load weight: 4,140 kg, maximum load weight: 19,860 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 06/2027, loading space length: 5,800 mm, total length: 2,550 mm, total width: 4,000 mm, total height: 7,200 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 3,850 mm, Equipment: ABS, compressed air brake, | Gsodam 3-axle timber trailer | Year of manufacture: 2012 | 2-axle, liftable | 4 pairs of stakes | Loading platform length: approx. 5.80 m | Tare weight: 4,140 kg | Payload: 19,860 kg | Gross vehicle weight: 24,000 kg | BPW axle with drum brakes | Austrian vehicle | Errors, typos and prior sale excepted. Lrjdpfx Akj Ab Tivoqeu

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. Lredezwpxzopfx Akqju The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts.

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm Lredpfx Akszrm T Ssqsu total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7032 TECHNICAL DATA - Hopper inlet: 1050x610mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 580mm - Main engine: 18.5kW - Pump engine: 0.75kW - Number of knives: 14 pcs - Knife dimensions: 30x30mm - Screen: 15mm x 20mm - Presser drawer - Electric auto-reverse Lrodpfx Akeztq Rwjqsu - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – German production – Auto-reverse – Presser drawer – Very good condition – Used wood chipper Net price: 47,900 PLN Net price: 11,140 EUR Net price converted according to an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1985, functionality: fully functional, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3 mm, Equipment: cabin, crane, For sale is a Wolf-Wagen, formerly used by a school. It has few operating hours and is in very good condition! Sold on behalf of a customer! - Miter saw - Measuring device - Cut-to-length system Ledpfxezau Sms Akqeru - Gripper

Condition: excellent (used), Catalog number: 7411 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Blade length: 430mm - Number of blades: 2 pcs - Screen dimensions: 60x60mm - 2 toothed pull shafts from below - Lower shaft motor: 1.5kW - Toothed pull shaft from above - Upper shaft motor: 1.5kW - Belt conveyor - Length of feed belt: 2250mm - Width of feed belt: 400mm - Main motor: 30kW Lredpfx Akjztq T Ejqeu - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000mm - Weight: 1800kg - Made in Germany - Auto-reverse (adjustable) - Used shredder, very good condition Net price: 69900 PLN Net price: 16256 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1994, large shredder, ideal for pallets or waste wood rotor width 1200 mm Lrodpfx Akjz D Sk Rsqju motor 30 kW with hydraulic pusher

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Loading hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main engine: 45kW - Pump engine: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen size: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approximately 9000kg ADVANTAGES - Made in France - New knives installed - Auto-reverse - Pressing drawer - Very good condition - Used shredder Net price: 129,900 PLN Net price: 30,209 EUR Lrjdpfszrna Hsx Akqeu Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, New: Yes Ljdpfxo Aarxgs Akqjru Colour: Blue

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. allowance for machining per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutting head drive motor: 22kW - Smooth feed speed adjustment + forward/reverse via frequency inverter - Feed motor: 1.5kW In sequence: - Infeed trough - Toothed pull rollers: 6 pcs - 4-knife cutting head - Smooth pull rollers: 6 pcs - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES – Manufactured by the Polish brand SAFO – DTR+CE documentation included – Includes sleeves – Used turning machine, very good condition Net price: 98,900 PLN Net price: 23,000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) Lodpfx Akszrui Ieqjru

Condition: excellent (used), CATALOG NUMBER 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - roller width 780mm - roller diameter 1000mm - blade length 780mm - number of blades 2 pcs - screen dimensions 55x55mm - 4 geared pull rollers at the bottom - lower roller motor 5.5kW - 3 geared pull rollers at the top - upper roller motor 5.5kW - belt conveyor - belt conveyor length 4300mm - belt conveyor width 600mm - belt feed motor 2.2kW - main motor 90kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H) 4600x2350x1700mm - overall feeder dimensions (L/W/H) 4550x980x970mm - total weight approximately 11000kg – manufactured in Germany, - auto-reverse (with adjustable settings) Lrsdpfx Aozrmw Dokqeu – used shredder, very good condition Net price: 231900 PLN Net price: 53930 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, mileage: 693,699 km, power: 338 kW (459.55 HP), first registration: 07/2003, fuel type: diesel, empty load weight: 11,600 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 3 axles, wheelbase: 3,900 mm, brakes: engine braking, gearing type: mechanical, emission class: euro4, suspension: steel-air, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, fog lights, gripper hydraulics, onboard computer, parking heater, truck registration, | Volvo FH 460 | Manual transmission | Air conditioning | Austrian vehicle | 6x2 | Good condition | Wheelbase: 3900/1370 | Timber crane | Errors, typos, and prior sale excepted. Lsdoz Srmcopfx Akqeru

Condition: used, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/1992, Year of construction: 1992, Internal vehicle number: G183 Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 7,300 kg Gross vehicle weight: 35,000 kg Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH Lrsdpfx Aswcuznskqju We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Lrodpfx Asxgt U Eekqsu Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,