Used Wide Pocket Shelf for sale (8,171)

Condition: used, Used equipment Features and technical data: - 2 L-shaped uprights with support tubes - 12 support tubes per upright - Clear height: 92 mm - Plug-in system for adjusting the clear height Gujdpfxoy Ap U Ne Ambod - Support tube diameter: 29 mm - Usable length of support tubes: 770 mm - Maximum load capacity of entire trolley: 500 kg (requirement: evenly distributed load, no impact loads) - Maximum load on 2 support tubes: 45 kg - 4 swivel castors with ball bearings and cast polyurethane coating, 160 mm - 2 castors with locking devices - Dimensions LxWxH: 500 - 3000 x 845 x 1840 mm Availability: short notice Stock location: 63934 Röllbach

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including new feed belt Equipment and technical data: - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air-cushion pressure pad controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating cleaning brush on the outfeed side of the machine - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of lateral belt alignment, ensuring uniform belt wear - With roller table at the infeed - With digital display unit for the motorized workpiece thickness setting - With additional veneer sanding pad - Including 2x spare sanding pads - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach Gujdewka T Sspfx Ambsd

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed Guedpfxow R Hh Uo Ambod - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Gujdpowpm I Tsfx Ambed Storage location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Guodpfxex Rpghe Ambjd 1 belt grinding machine with combination unit with electronic segmented pressure bar for grinding soft and hard veneers Calibrating and fine-sanding solid wood Calibrating workpiece carrier plates Removing defects from veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding of barrier films with graphic operator terminal NC-controlled thickness adjustment from 3-150 mm Activation of the calibrating roller via the terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Grinding width 1350 mm Belt length 2150 mm Belt speed, frequency-controlled, approx. 2-18 m/s Drive for grinding unit 15 kW Feed rate 5/10 m/min Compressed air 6 bar Compressed air consumption 15 NL/min with belt cooling 490 l/min Extraction connection 180 mm Air requirement for grinding unit 1800 m³/h Required air velocity 20 m/s Total power connection approx. 17 kW Weight approx. 2500 kg Dimensions WxDxH 2090x1670x2020 mm The machine will be fitted with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Gjdpfx Amjwka S Ujbjud Location: 65439 Flörsheim

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg Godey T Ip Tspfx Ambeud ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: used, Planer machine with planing shaft at the bottom and top Double-sided planer for producing slats Feed rate 110 m/min Maximum planing width 310 mm Electrical power 95.75 kW Bottom: 37 kW Gujdpfx Ajy Ry Ddjmbsd Top: 45 kW Feed: 13 kW Jointing mechanism at the bottom and top

Condition: excellent (used), functionality: fully functional, Like-new, guaranteed heavy-duty basic shelving unit with an electric roller shutter. It has a few minor dents and scratches. Consisting of: - 1x heavy-duty basic shelving unit with 2 column frames with 100% pull-out base, usable depth 950 mm, height: 2000 mm - 2x multi-part side panels, usable depth 950 mm, suitable for shelf height: 2000 mm - 3x shelf panels, 12 mm beech multiplex, for shelf field, usable depth: 950 mm Gsdpfxeziwwco Ambeud - 1x roller shutter for basic shelving unit, usable depth 1350 mm, suitable for shelf height: 2000 mm New price: €11,019 (gross) The stated price is the gross price. Sale only with invoice and VAT shown. Inspection possible at any time by arrangement. Shipping possible with cost assumption. We can assist with loading using a forklift for self-collection.

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide-belt sanding machine with transverse and longitudinal sanding units for sanding, among other things, veneer before painting. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Godpsya I Rijfx Ambsud Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3-140 mm Conveyor bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min (adjustable) Sanding units: transverse/longitudinal/brush Brush roller unit: centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: fiber 1. Transverse sanding unit: fail-safe braking system, pneumatic belt tension, belt monitoring, pressure pad belt system, intermittent belt extraction, sanding belt dimensions: 4900 x 150 mm, belt sanding speed: 12 + 24 m/s, drive power: 13 / 17 kW 2. Longitudinal sanding unit: stepless, electronic control of the sanding belt speed via a frequency converter, fail-safe braking system, pneumatic belt tension, intermittent belt extraction, infrared belt control, sanding belt running in the opposite direction, sanding belt dimensions: 2620 x 1350 mm, belt sanding speed: 0.3 – 12 m/s, drive power: 11 kW Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar. Distance between guide rollers: 40 mm Pneumatic belt tension. The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Weight: approx. 5500 kg Space requirement: approx. 2550 x 2675 x 2400 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,453 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,350 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 12,450 kg, empty load weight: 7,450 kg, total height: 2,550 mm, total length: 2,700 mm, total width: 2,500 mm, color: green, motor model: V2403-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 Years of Experience | In-house Service & Paint Shop 🎨 | Professional Advice 🧠 | Own Transport 🚛 | After-sales Support 🤝 Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. We serve clients all over Europe – from small businesses to large industrial operations. Our forklifts are more than just machines – they’re your guarantee of smooth and reliable logistics. ⭐ What Sets Us Apart? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, testing, oil & filter replacement, reconditioning of key components) ✅ UDT certification can be arranged upon customer request ✅ In-house paint shop and service workshop – machinery perfected both technically and visually ✅ Europe-wide transport using our own fleet and trained drivers ✅ Operator instruction on delivery + on-site performance test ✅ Post-sale service and technical support – we’re here for you after the purchase too ✅ Come and see or test our machines at our site – you’re always welcome! ✅ Hundreds of satisfied clients across Europe – join those who trust us ✅ Help with financing – we work with leading leasing companies ✅ Invoice in EUR or PLN – you choose 📦 AVAILABLE NOW: COMBILIFT C5000XL – Multi-Directional Forklift 🔹 Year: 2018 🔹 Operating hours: 6,453 h 🔹 Power: Diesel 🔹 Lifting capacity: 5,000 kg 🔹 Mast: Duplex – 4,000 mm 🔹 Wide fork positioner: 3,550 mm | Forks: 1,300 mm 🔹 Superelastic tires – 100% condition 🔹 Technical condition: Excellent – after full service 🔹 Visual condition: Clean, corrosion-free, ready for work 📏 Dimensions: • Lowered height: 2,550 mm • Total length: 2,500 mm • Width: 2,700 mm • Positioner width: 3,550 mm • Structure height: 3,000 mm 🏭 Ideal For: ✔️ Warehouses with narrow aisles ✔️ Wood, steel, and pipe industries ✔️ Handling long or oversized loads ✔️ Indoor and outdoor operations Gujdpfezk T Slsx Ambsd

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,942 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,250 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🇬🇧 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4000 – DUPLEX 4600mm – Year 2019 – 3942 h – LPG / GAS – SIDE SHIFT – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Professional consulting | Own transport | After-sales support 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. From small companies to major industrial plants – our forklifts mean reliability, safety, and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection – service, testing, oil & filter replacement, component regeneration 🧾 Full UDT inspection available 🎨 Own paint & service workshop – refined look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery 🛠️ After-sales support – we stay with you after purchase 👀 Machine viewing & testing available Godpfx Amozk T N Reboud 🤝 Financing with leading leasing companies 💶 Invoice in EUR or PLN 🏷️ IN OFFER COMBILIFT C4000 – Four-way / Multi-directional forklift 📆 Year: 2019 | ⏱️ Hours: 3942 | ⚙️ Drive: LPG / Gas | 💪 Capacity: 4000 kg 🎯 Mast: Duplex 4600 mm | 🔧 Forks: 1200 mm | Positioner: 1150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 2250 mm Dimensions: Height 2400 mm | Length 2400 mm | Width 2250 mm | Positioner width 1150 mm | Structural height 3000 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel & pipe industry | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,537 h, load capacity: 3,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,700 mm, motor manufacturer: KUBOTA V1505-T, gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 23 X 10 - 12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 | 2014 | Diesel | Duplex 4100 mm | Condition 5/5 Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for work. No compromises. We offer a COMBILIFT C3000 – a robust multi-directional forklift designed for handling long and heavy loads in demanding environments. After comprehensive technical servicing, fitted with brand-new superelastic tyres, in near-new condition – ready for immediate deployment 🚀. A reliable solution for businesses that value stability, efficiency, and maximum uptime. 🔍 Key specifications: Year: 2014 | Operating hours: 7,537 Drive: Diesel | Capacity: 3,000 kg Load centre: 600 mm Mast: Duplex | Lift height: 4,100 mm Wide fork positioner: 2,700 mm Fork length: 1,100 mm Weight: 5,200 kg 📐 Dimensions: L/W/H: 2,300 / 2,300 / 2,350 mm Overall height: 2,700 mm 🛞 Tyres (NEW – 100%): Superelastic (solid) Front: 16x7x10 1/2 | Rear: 23x10-12 ⚙️ Equipment: Heated full cabin ❄️🔥 Wide fork positioner – ideal for long loads Duplex mast – excellent visibility 👀 Refurbished, corrosion-free ✨ 🏭 Ideal for: Gjdpfx Amozk T Igsbeud Narrow aisle warehouses Timber, steel, and pipe industries Indoor & outdoor operation ⭐ Why FT LOGISTICS? Proven machines Professional pre-sale service Verified condition – no surprises Transport & support available

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,873 h, load capacity: 3,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,400 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2011 – 7873 HOURS – LPG – DUPLEX 4100 mm – WIDE FORK POSITIONER – CONDITION 5/5 🔧🚀 Used and new forklifts with guaranteed quality – FT LOGISTICS 🏆 Ready for operation. No compromises. This COMBILIFT C3000 is more than just a machine — it is your assurance of smooth, reliable warehouse operations with zero downtime. Built for the toughest operating conditions, fully serviced both technically and visually, this unit is in near-new condition and ready for immediate deployment. 💼✨ Key Technical Specifications 📊 Year of manufacture: 2011 Operating hours: 7873 Drive: LPG (gas) Load capacity: 3000 kg Mast: Duplex – 4100 mm Fork positioner: 2700 mm | Forks: 1200 mm Tyres: Superelastic (100%) Technical condition: 5/5 – fully serviced, ready to work Visual condition: refurbished, no corrosion, like new Height: 2350 mm | Length: 2400 mm | Width: 1950 mm Overall height: 2600 mm Tyres: Superelastic – Front 200/50-10 | Rear 23x10-12 Ideal for 📦🏗️ Warehouses with narrow aisles Guedpozk T Iaefx Ambjd Timber, steel, and tube industries Handling long loads Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust. 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 2,793 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 3,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFT WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 COMBILIFT C4500 – DUPLEX 4000mm – WIDE FORK POSITIONER – 2014 – 2793 H – DIESEL – 3150mm – CONDITION 5/5 ⭐ Experience | Own service & paint shop | Consulting | Own transport | After-sales care 🔍 Looking for a forklift you can trust? We are a reputable European dealer of new & used forklifts. Our machines are fully inspected, serviced and ready to work — a true guarantee of reliability and smooth logistics. 💎 WHY CHOOSE US ✅ Full technical inspection (service, testing, oil & filter change, component regeneration) 🧾 UDT inspection available 🎨 Own paint & service workshop – perfect look & performance 🚚 Europe-wide transport by our trained drivers 🎓 Operator training & machine test at delivery 🛠️ After-sales support – we stay with you after purchase 🤝 Financing with top leasing companies 📄 Invoice in EUR or PLN Gjdjzk Ttcopfx Ambjud 🏷️ IN OFFER COMBILIFT C4500 – Four-way / Multi-directional forklift 📆 Year: 2014 | ⏱️ 2793 h | ⚙️ Diesel | 💪 4500 kg 🎯 Mast: Duplex 4000 mm | 🔧 Forks: 1300 mm | Positioner: 3150 mm 🛞 Tyres: Superelastic – 100% condition ✨ Condition: Excellent – after full service, rust-free, ready to work 📏 Free lift: 1550 mm Dimensions: Height 2400 mm | Length 2500 mm | Width 2600 mm | Positioner width 3100 mm | Structural height 2800 mm 🏗️ PERFECT FOR: 🏠 Narrow aisles | 🪵 Wood, steel, and pipe industries | 📦 Long loads | 🌦️ Indoor & outdoor FT LOGISTICS – Quality we stand by. Service you can trust. ⚙️💼

Condition: good (used), functionality: fully functional, mileage: 663,543 km, power: 240 kW (326.31 HP), first registration: 09/2017, fuel type: diesel, empty load weight: 9,464 kg, maximum load weight: 9,461 kg, overall weight: 19,000 kg, tire size: 315/70 R 22.5, axle configuration: 2 axles, wheelbase: 5,800 mm, fuel: diesel, brakes: telma, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,600 mm, loading space width: 2,470 mm, loading space height: 2,400 mm, Year of construction: 2017, operation weight: 19,000 kg, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, electric window regulation, lane keeping assist, onboard computer, power assisted steering, soot filter, tail-lift, traction control, RENAULT D19 WIDE 320 – 4X2 – EURO 6 – CURTAIN-SIDED BODY AND TAIL LIFT – TELMA FIRST REGISTRATION: 12/09/2017 663,543.8 KMS Guodpfxezibybo Ambsd DTI 8 ENGINE – 326 HP EURO 6 STANDARDS AD BLUE HIGH CAB – SLEEPER CAB WHEELBASE 5,800 MM PNEUMATIC REAR SUSPENSION LIFT/LOWER VALVE ABS – EBS – ASR – AEBS – LANE DEPARTURE WARNING – HILL START ASSIST OPTIDRIVER 12-SPEED AUTOMATIC GEARBOX OPTIBRAKE ENGINE BRAKE TELMA ELECTRIC EXHAUST BRAKE CRUISE CONTROL ON-BOARD COMPUTER AIR CONDITIONING NIGHT HEATER SUNROOF ELECTRIC WINDOWS AND MIRRORS CENTRAL LOCKING CURTAIN-SIDED BODY: 7,600 X 2,460 X 2,400 MM SLIDING CURTAINS OPENING ROOF OMEGA REINFORCED FLOOR RETRACTABLE DHOLLANDIA DHSM.15 TYPE TAIL LIFT, CAPACITY 1,500 KGS TIRES: 315/70 R 22.5 GVW: 9,464 KGS GCW: 19,000 KGS PAYLOAD: 9,461 KGS

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW Gusdpfx Amszfpq Hjbsd - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm Guedpfezfpm Uox Ambjd - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,311 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, motor model: V2403-T, Equipment: CE marking, adjustable boom, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🎨 In-house service & paint shop | 📊 Professional consulting | 🚚 Own transport fleet | 🤝 After-sales support Are you looking for a reliable forklift? We are an established dealer of new and used forklifts with a longstanding reputation. We serve customers throughout Europe – from small businesses to large multinational industrial enterprises. Our forklifts are more than just machines – they are a guarantee that your logistics will operate seamlessly and reliably. ⭐ What makes us stand out? ✅ Every forklift undergoes a comprehensive technical overhaul (full servicing, inspection, replacement of filters and oils, refurbishment of key components) ✅ Full UDT inspection available upon customer request ✅ 🎨 In-house paint shop and service center – vehicles reconditioned both technically and visually ✅ 🚚 Europe-wide delivery using our own fleet with professional drivers ✅ 👨‍🏫 Operator training upon delivery + on-site functionality check at your location ✅ 🛡️ After-sales service and technical support – we continue to support you after the sale ✅ 🏭 View and test machines at our headquarters – arrange a visit! ✅ 🌍 Hundreds of satisfied customers throughout Europe – join our trusted partners ✅ 💶 Financing solutions available – we collaborate with leading leasing companies ✅ 📑 Invoices in EUR or PLN available – according to customer preference 🚜 CURRENTLY AVAILABLE: COMBILIFT C4500 – Multi-directional (4-way) forklift 📅 Year of manufacture: 2018 ⏱️ Operating hours: 4,311 h ⛽ Power source: Diesel 📦 Lifting capacity: 4,500 kg 📏 Mast: Duplex – 4,000 mm lift height 🔧 Wide fork positioner 3,100 mm | Forks 1,300 mm 🛞 Superelastic tyres – 100% condition 🟢 Technical state: Excellent – after complete servicing ✨ Visual state: Well-maintained, rust-free, ready for immediate use Dimensions: 📐 Truck height: 2,400 mm 📐 Overall length: 2,500 mm 📐 Width: 2,600 mm 📐 Fork positioner width: 3,100 mm 📐 Overall structure height: 2,800 mm 🏆 Ideal for: Gsdpfxszk Il To Ambeud 📦 Warehouses with narrow aisles 🌲 Timber, steel, and pipe industries 📏 Long load handling 🏭 Indoor and outdoor operations

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,537 h, load capacity: 3,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,700 mm, motor manufacturer: KUBOTA V1505-T, gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 23 X 10 - 12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 | 2014 | Diesel | Duplex 4100 mm | Condition 5/5 Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for work. No compromises. We offer a COMBILIFT C3000 – a robust multi-directional forklift designed for handling long and heavy loads in demanding environments. After comprehensive technical servicing, fitted with brand-new superelastic tyres, in near-new condition – ready for immediate deployment 🚀. A reliable solution for businesses that value stability, efficiency, and maximum uptime. 🔍 Key specifications: Year: 2014 | Operating hours: 7,537 Gjdpfozk Iirjx Ambsud Drive: Diesel | Capacity: 3,000 kg Load centre: 600 mm Mast: Duplex | Lift height: 4,100 mm Wide fork positioner: 2,700 mm Fork length: 1,100 mm Weight: 5,200 kg 📐 Dimensions: L/W/H: 2,300 / 2,300 / 2,350 mm Overall height: 2,700 mm 🛞 Tyres (NEW – 100%): Superelastic (solid) Front: 16x7x10 1/2 | Rear: 23x10-12 ⚙️ Equipment: Heated full cabin ❄️🔥 Wide fork positioner – ideal for long loads Duplex mast – excellent visibility 👀 Refurbished, corrosion-free ✨ 🏭 Ideal for: Narrow aisle warehouses Timber, steel, and pipe industries Indoor & outdoor operation ⭐ Why FT LOGISTICS? Proven machines Professional pre-sale service Verified condition – no surprises Transport & support available

Condition: used, Year of construction: 2007, machine/vehicle number: MR006928, Robust and precise wide belt sander with a working width of 1,100 mm. In good condition and ready for immediate use. This Kündig Premium-2 is a robust and precise wide belt sander, equipped with two sanding units: a calibration roller for efficiently sanding solid wood and sheet material to size, and a sanding shoe for a fine, uniform finish. This sander is in good condition and ready for immediate use. Technical specifications: - Number of sanding units: 2 - Sanding unit 1 type: Calibration roller - Sanding unit 2 type: Sanding shoe - Maximum sanding width: 1100 mm - Maximum working height: 200 mm - Minimum working height: 3.5 mm - Feed rate: 3 - 15 /min - Sanding belt length: 2000 mm - Sanding belt width: 1120 mm Gusdpezh Hixofx Ambod - Serial number: 26453

Condition: excellent (used), Working width: 110 cm First unit: steel roller Second unit: combination – rubber roller plus pad Pneumatic belt cleaning Pneumatic oscillation with photocells Electric table height adjustment (up/down) Pneumatic belt tensioning Two feed speeds Abrasive belt size: 2200 x 1130 mm Voltage: 400 V Motor: 12 kW Weight: 1542 kg Year of manufacture: 2004 Gujdsw Drb Uspfx Ambsd

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Guedpfx Amsx Twcpebjd

Condition: used, Year of construction: 2014, The Kongsberg C series is a multifunction super-wide digital cutting table for soft and rigid signage production. It’s perfect for protective packaging and can handle a wide range of materials, from foam and plastics, flexible materials, folding carton and all kinds of corrugated. The Kongsberg C table is designed to keep up with the faster, wider printers of today and tomorrow. Exceeding the standards in versatility, precision and productivity, it has everything that Kongsberg tables are noted for, and more. Gusdpfx Amezcqp Tjbsd Max. material size: 3200 x 3200 mm Max. speed: 1666 mm/s Max. acceleration 15.7 m/s2 Tools: - vibracut HF - ⁠presscut - ⁠rotacut - ⁠rm knife - ⁠heavy duty unit - ⁠cordoni di varie tipologie - ⁠HD-30 - ⁠V-notch knife 45 In production, demo possible upon request For further technical details please refer to attached brochure

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,567 h, load capacity: 2,500 kg, lifting height: 4,600 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, motor manufacturer: Volkswagen, fork length: 850 mm, overall weight: 4,800 kg, empty load weight: 4,900 kg, total height: 2,830 mm, total length: 2,020 mm, total width: 2,270 mm, Equipment: CE marking, adjustable boom, cabin, pallet forks, Very good condition Wide fork positioner We sell forklifts after a full service. Prepared for the end user. Ready to use. Godpfx Amszkuqvobjud We can arrange transport within Europe and worldwide.