Used Windings Stator Rotor for sale (2,362)

Condition: good (used), Year of construction: 1987, functionality: fully functional, Shaftless unwinding with the following parameters: Maximum jumbo roll width: 1400 mm Lsdpfx Akexlizfsqjru Minimum jumbo roll width: 480 mm Maximum jumbo roll diameter: 1600 mm Idler roll diameters: 150 mm and 300 mm Minimum speed: 300 m/min with a separate control cabinet.

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Lsdszi Eimspfx Akqjru

Year of construction: 1987, condition: ready for operation (used), Max. coil weight: 10t, controls: SIEMENS S5, without documentation. Lrsdpfx Akegwg Udjqeu

Condition: used, machine/vehicle number: 14088, Rotor diameter = 800 mm Rotor width = 1500 mm Rotor blades = 9 rows Stator blades = 4 pieces Lodpfj Admcnox Akqjru Drive power = 200 kW

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing Lodpfx Ake Ad H Iqsqeru • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only Lsdpozlat Sefx Akqeru one work area for bars up to 7.7 m long or two independent work areas with piece load/unload while machine is working. It has an 8 place tools storage on board the X axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section.

Condition: used, Year of construction: 2012, The SAC F4TL window manufacturing centre is designed to meet the requirements of modern window production. It enables highly efficient, high-quality manufacturing with minimal setup time and without the need for tool changes. After machining, the workpiece is automatically returned to the operator. SAC F4TL CNC Window Manufacturing Centre – Machining Units Tenoning Side 1. Tenoning carriage 2. End trimming unit 3. Tenoning spindle Profiling Side 4. First profiling spindle 5. Second profiling spindle 6. Glazing bead notching unit 7. Hardware slot milling unit (optional) Feed System Tenoning Side 1. Tenoning carriage • Machining speed: 3–10 m/min • Return speed: 45 m/min • Table size: 290–955 mm • Motor power: 1.1 kW • Fence tilting angle: ±60° 2. End trimming unit • Saw blade diameter: 400 mm • Bore diameter: 30 mm • Motor power: 3 kW 3. Tenoning spindle • Vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 620 mm • Vertical travel: 565 mm • Motor power: 7.5 kW Lrsdpfxezl D Dns Akqsu • Maximum tool diameter: 350 mm Profiling Side 4. First Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: left/right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 5. Second Profiling Spindle • Spindle vertical adjustment speed: 5 m/min • Spindle diameter: 50 mm • Spindle length: 320 mm • Vertical spindle travel: 295 mm • Horizontal spindle adjustment: 60 mm • Spindle rotation direction: right • Motor power: 7.5 kW • Maximum tool diameter: 240 mm 6. Glazing Bead Notching Unit • Saw blade diameter: 200 mm • Saw blade bore: 30 mm • Horizontal spindle adjustment: 60 mm • Motor power: 2.2 kW Optional Unit 7. Hardware Slot Milling Unit • Motor power: 3 kW • Spindle diameter: 30 mm • Spindle length: 100 mm • Horizontal spindle adjustment: 60 mm • Vertical spindle adjustment: 60 mm • CNC-controlled with 2 vertical positions (maximum difference: 60 mm) • Maximum tool diameter: 190 mm Feed System • Feed speed: 4–20 m/min • Pneumatic workpiece clamping CNC Control and Software • 17" colour LCD monitor • 102-key alphanumeric keyboard • Operating system: Windows XP Professional Options • Hardware slot milling unit • Motorized NC-controlled stop • Return roller conveyor • Leitz IV 69 tool set • Leitz IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, SECOND-HAND WORKING CENTER FOR DOORS AND WINDOWS SAOMAD OPERATOR 8 - CE RULES Butting disk saw: - Motor power Hp 4 - Saw shaft revolution speed 3000 rpm - Disk saw diam. 400 mm. Tenoning side - Min. work piece lenght mm. 200 - Max. work piece lenght mm. 2800 - Min/max. work piece thickness mm. 30/120 - N. 2 shafts Sash profiling - Motor power Hp 0 - N. 4 shafts Glass stop recovery Hardware grooving unit Lrodpfowrb Tvex Akqju Roller advance Wooden piece return roller Max. feeding speed 20 m/min - Year 2000

Condition: good (used), functionality: fully functional, Welding line with logistics (URBAN year 2008 / SOENEN year 2018) URBAN welding line – €10,000 Ledpfx Asv Enw Nskqeru SOENEN welding line with logistics – €25,000

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine Lodowcxb Sspfx Akqeru 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 29092021, T-503 PAPER SLITTER REWINDER MACHINE GENERAL INFORMATIONS: Machine weight : ≈ 2000 kg Number of Knives : 12 Units Bobbin Loading Stand : Yes Air Shafts : Yes Tension Control System : Yes Brake System : Yes Speed Control System : Yes Trucker motor power : 5,5 KW Top rewind motor power: 7,5 KW Ledoy Twciopfx Akqjru Bottom rewind motor power : 7,5 KW Unwind: 1250mm Rewinder: 920 mm Width: 1200 mm

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Lrsdpfx Aey T R Tuokqju Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: used, Technical specifications: Working length: 3000 mm Working width: 1200 mm Maximum wood thickness: 120 mm Overall dimensions: Lodpfx Akjziacujqoru Length: 2100 mm Width: 3700 mm Height: 2200 mm

Condition: used, Year of construction: 2011, Overview This ROBOPAC / SIPA HELIX HS30 ring wrapper, manufactured in 2011, is designed for the automatic stretch wrapping of palletized shrink-packed beverage products. The system was previously part of a complete SIPA palletizing and wrapping line. The SIPA palletizing section has already been sold; therefore, only the ROBOPAC HELIX HS30 pallet wrapping section is still available. The wrapper is a ring-type stretch wrapping machine for stabilizing pallet loads after palletizing. The machine is currently dismantled and reported to be in good technical and working condition. It is available immediately from Serbia. Technical Data - Manufacturer: ROBOPAC - Model / Type: HELIX HS30 - Machine Type: Automatic ring pallet stretch wrapper - Year of Manufacture: 2011 Lrsdpfx Aozf Ehuekqsu - Application: Automatic wrapping - Wrapping System: Ring wrapper - Wrapping Material: Stretch film - Operation: Automatic pallet wrapping after palletizing - Previous Line Capacity: approx. 39 pallets/hour, depending on product configuration - Included Components: ROBOPAC HELIX HS30 ring wrapper section - Documentation: Manuals and electrical drawings available - Spare Parts: Not included - Status: Dismantled - Availability: Immediate

Condition: used, Oertli window tool set for the manufacture of timber/aluminium windows IV 77 & 67 and timber windows IV 77 & 67. Drawings available on request. Technical data: - Blade: WP - Flying diameter (ø): 123 mm - Bore: 50 mm Ledpfxozx Sakj Akqsru - Marking: MEC - Material: Steel/aluminium

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: Ljdpfx Aezx Smqokqjru 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request VAT: exclusive Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Price in €: on request

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. It is in used condition, but fully functional. Year of manufacture: 1988, machine number: 032-230. Including control cabinet! Comes with three complete sets of tools from Leitz. - IV68 insert cutter with standard profile - IV68 cornice profile for listed buildings - Tools for wood and aluminum windows The following tools are included (as seen in the pictures): 1x slot cutter, vertical and 1x horizontal 1x slot frame, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile slot cutter, horizontal 1x tenon cutter, vertical 7 slot cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping 1x frame milling head, aluminum, for clipping Ljdpfx Aozx Emdjkqeru 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information is available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any guarantee. Private sale. Old, used machine. No warranty, return, or guarantee claims.

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data - Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab Lsdpfx Akozb Azfsqjru - Model: Octopus 1800 BFTS - Machine Type: Automatic ring pallet wrapper - Year of Manufacture: 2006 - Application: Stretch wrapping of palletized goods - Wrapping System: Horizontal ring wrapping system - Product Transport: Integrated motorized roller conveyor - Electrical Supply: 3 x 400 V - Operating Current: 20 A - Control Interface: Siemens SIMATIC Panel - Conveyor System: Roller conveyor through wrapping area - Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly - Location in Line: Palletizing / end-of-line packaging area - Condition: Used, installed in industrial production environment

Condition: used, The machine is for sale together with all tools as shown in the pictures. Ledpjy Rumtjfx Akqeru

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 Lredpfx Akoyibx Aeqju -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Condition: used, functionality: fully functional, VERTICAL CLAMP FOR WINDOWS ITALPRESSE Lrsdpfx Aksx Rrp Eoqju

Condition: used, This listing is for a CAB ER6 External Rewinder. Lrodpfxexxya So Akqsu The unit is in full working condition and is ready for immediate release. The CAB ER6/300 External Rewinder is a versatile and efficient label rewinding solution designed to work seamlessly with the Squix 6.3 label printer and other 6-inch label printers. Featuring a built-in power supply, it operates independently without requiring power from the printer, making it a universal and flexible option for industrial labeling applications. Key Features: 🔹 Compatible with Squix 6.3 and Other 6-Inch Label Printers – Ensures seamless integration and efficient operation. 🔹 Wide Material Support – Handles labels up to 180mm wide, accommodating various printing needs. 🔹 Large Roll Capacity – Supports label rolls with a maximum outer diameter (OD) of 300mm. 🔹 Dual Winding Modes – Allows labels to be wound inside or outside for greater flexibility. 🔹 Independent Operation – Built-in power supply eliminates dependency on the label printer. 🔹 Adjustable Core Size – Compatible with 44mm and 76mm cores for diverse applications. 🔹 High-Speed Rewinding – Maximum speed of 300 mm/s ensures fast and efficient label handling. Specifications: Compatible Printers: Squix 6.3 and other 6-inch label printers Material Width: Up to 180 mm Maximum Roll Diameter: 300 mm Winding Options: Inside or Outside Core Sizes: 44mm or 76mm Rewind Speed: Up to 300 mm/s Power Supply: Built-in (independent from printer) Dimensions: 350 x 340 x 390 mm Weight: 6.3 kg Benefits: Universal Compatibility – Works with various 6-inch label printers, ensuring broad usability. Enhanced Efficiency – High-speed rewinding improves workflow and productivity. Independent Power Supply – Eliminates extra load on the printer, reducing wear and tear. Flexible Winding Options – Supports both inside and outside winding, offering customized label handling. Large Roll Capacity – Handles big label rolls, minimizing downtime due to frequent roll changes. Applications: 🔹 Industrial Labeling – Ensures efficient label rewinding for high-volume printing. 🔹 Warehouse & Logistics – Helps streamline labeling processes for inventory tracking. 🔹 Manufacturing – Optimizes label handling for product identification and compliance. 🔹 Retail & Distribution – Improves efficiency in product labeling and packaging.

Condition: ready for operation (used), Year of construction: 1988, Window manufacturing machine Manufacturer: Okoma Model: UF1 S Year of manufacture: 1988 Ledpfsyk Haqox Akqjru with tool

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Lsdpfjw Nvkisx Akqjru

Condition: new, max. workpiece length 3200/5100 mm profile spindle 1 Stück Lrsdsd Rhd Repfx Akqju main drive 12 kW Control Beckhoff CNC Number of axles 5 St.