Used Wire Cuting Forming for sale (6,747)

Condition: ready for operation (used), Year of construction: 1990, An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Dsdpfswa A Ttox Aftocd

Condition: ready for operation (used), Year of construction: 2008, A Fuji flowpack horizontal tubular bag machine is available. Packaging capacity: 140 packages/min, max. film width: 600mm, cut length range: 130mm-430mm, max. product width: 200mm, max. product height: 90mm, machine dimensions X/Y/Z: approx. 4800mm/1300mm/1500mm, weight: approx. 2300kg. On-site inspection is possible. Dcsdewnr H Sopfx Afted

Condition: ready for operation (used), Year of construction: 2006, A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible. Dcsdpfoxa Elcox Aftsd

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Dcodpfjxzikfjx Aftod

Condition: ready for operation (used), Year of construction: 2014, A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible. Dcsdpfxoxuiuqs Aftsd

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Djdpfew Sxx Iex Aftocd

Condition: ready for operation (used), Year of construction: 1987, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible. Dcodpfjw H At Tsx Aftjd

Condition: ready for operation (used), Year of construction: 1991, A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible. Dsdpsw H Audefx Aftecd

Condition: ready for operation (used), Year of construction: 2002, There are zwei identical vertical bag filling machines available, weight: 1.1t. Dodpfx Afjnfvxzotocd

Condition: used, Year of construction: 1998, Sodick AM 35 CNC EDM Machine Model: AM 35 Year: 1998 Control: Neuro Fuzzy II 40: Dodpfx Aewqgh Ajftscd ‘X’ axis Travel: 350mm ‘Y’ axis Travel: 250mm ‘Z’ axis Travel: 250mm Tank Dimensions: W 790 x D 590 x H 320mm Max. electrode weight: 50 kg Max. Table Load: 550 kg With: Magnetic chuck 350 x 250mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming line RSU 2500 - 2000 P Desch compact drive unit Electronic press force measuring system Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and slide clamping devices Raster VWA hydraulic roll feed, band width 500 mm, with Topochrom roll coating Slide area 1000 x 2000 mm Stroke rate: 20 - 150 spm Stroke adjustment: 40 - 200 mm Dcodpoxcbbrofx Aftsd Optionally with Kohler coil line 20030.400/9-2000 .2H

Condition: ready for operation (used), Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130. Dodpfjhncwisx Aftocd

Year of construction: 1991, condition: ready for operation (used), Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale. Dcodpfxohtvmaj Aftod

Year of construction: 1990, condition: ready for operation (used), Was used for filling 10l milk bags, there is a second machine as a source for spare parts available. Dodpfx Asir U S Rjftecd

Condition: used, functionality: fully functional, total height: 3,700 mm, total width: 5,000 mm, total length: 7,700 mm, For sale: well-maintained Hassett International vacuum forming machine. The machine has a maximum working area of 3000 × 3500 mm and can form products up to 1100 mm deep. It is ideal for manufacturing spas, swimming pools, hot tubs, and other large-size products. Technical specifications: • External dimensions: 5000 × 7700 × 3700 mm • Can be disassembled into smaller parts for transport • Maximum sheet thickness: up to 8 mm (acrylic, ABS, etc.) • The control computer allows switching on only the required heating sections of the oven and adjusting their temperatures – for smaller products, the entire oven does not need to be in operation Included in the set: • Oven (with ceramic heating elements) Dedpfx Asw Nhdhjftecd • Hydraulic lift table • Vacuum pump • Vacuum tank • Computer and control electronics • Worktable • One mould (octagonal, black) The green rectangular mould is not included. The machine is in daily use. Testing on-site is possible, and training can be provided. Upon request, we can provide contact details of a reliable company that can disassemble, transport, reassemble, and maintain the machine in the future.

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet - seal lid with hot melt glue Dcjdpfxeybtnvo Aftod - index to serialised printing - carton discharge

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: D06L/7240, Offer Number: D06L/7240 Machinetype: wire and strip bending machine Dodewi S Sqepfx Aftjcd Info: 3D - CNC Make: POST Type: Robomat Constr. year: 1992 wire diameter: 5-12 mm spring diameter: feeding length: unlimited feeding length: Location: In our warehouse

Condition: excellent (used), Max. external diameter: 75 mm Hydraulic pressure: 102 bar Dedpfx Ajw U Awasftscd Safety pressure: 120 bar Tank capacity: 76 L CE standards Dimensions: 2200 × 830 × 1350 mm Weight: 1300 kg

Condition: excellent (used), A roll forming line with rollers for cold rolling office and storage cabinet fronts made of cold-rolled sheet metal. Roller center distance: 140 mm, Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The system is electrically operated. Dsdpfewxv H Dex Aftscd

Condition: excellent (used), The minimum order quantity is 8 stations, with the price per station being €4,000. The stations are new. The line consists of stations for profiling shafts with a diameter of 50 mm and an 8 mm keyway. Material feed thickness ranges from 0.4–2.5 mm, with a strip width of 320 mm. There are 8 stations per table, driven by a 15 kW motor with a reduction gearbox. Four sets of stations are mounted on robust steel beams measuring 45 x 700 x 1,500 mm. This allows for quick changing of rollers fitted with various spare modules for finished profiling station segments. This configuration includes two table segments with 8 stations each, providing a total of 16 profiling stations. The specified price applies per set of stations on a given table. Dcodpfx Afewxv Nlstjd These tables can be configured and assembled according to the required profile—e.g., with 8, 16, 24, or 32 stations. The table features a strip guide and a turk's head, a straightening head, and a profile output device before the guillotine shear, a flying saw, or a fixed take-off table. We offer various configurations of such solutions for these tables. By exchanging the shafts, we can achieve a maximum input width of 550 mm.

Condition: like new (used), Year of construction: 2020, Technical Specifications Number of bags: 6 Total weight when filled (kg): 180 Dedpfjv S D Taex Aftecd Empty weight (kg): 170 Power: 0.18 kW - 400V / 50 Hz Diameter (mm): 1100

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, Fanuc Alpha 1iC XL – extra high Z travel: 410 mm Excellent condition – fully operational Dodeyh Rt Tjpfx Aftscd Year of manufacture: 12/2006 Approx. 32,000 operating hours Control: Fanuc Alpha 180is-WB 5 axes: X: 550 mm / 900 mm/min rapid traverse Y: 370 mm / 900 mm/min rapid traverse U: 120 mm / 450 mm/min rapid traverse V: 120 mm / 450 mm/min rapid traverse Z: 410 mm / 900 mm/min rapid traverse Max. workpiece weight: 1000 kg Maximum cutting angle: 30° Automatic wire threading Weight approx. 3.1 t Without screen above the control unit Availability: very soon Loading possible

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 1 mm, shaft diameter: 50 mm, input voltage: 400 V, coil weight: 3,000 kg, FOR SALE – Roll Forming Line for Drywall Profiles UW / CW (EU + IT) For sale: cold roll-forming line for metal drywall profiles, complete and high-productivity, designed for the production of UW, CW_EU and CW_IT profiles. Main features: * Roll forming line with 18 forming stations * Double hydraulic decoiler (3 tons per head) * Introduction and lubrication unit * Integrated rotary punching unit Djdoyi Hl Ropfx Aftecd * Multi-axis adjustable straightener * Double wagon cutting and punching unit * Dedicated cutting and punching dies for UW, CW_EU and CW_IT * Bosch Rexroth hydraulic power unit * CMZ control * CE certified * Complete safety guarding system Performance: * Working thickness: 0.50 – 1.00 mm * Material: DX51D + Z100 * Production speed: up to 130 m/min * Dimensional tolerance: ±0.5 mm/m * Total line length: approx. 15 m Included equipment: * Full set of cutting and punching dies * PLC software backup * Complete technical documentation * Construction and as-built drawings * CE Declaration of Conformity Machine condition: Complete industrial machine, high-end specification, manufactured by an international specialized roll-forming machinery producer. Ideal for manufacturers of drywall systems. Machinery is used but constantly updated and improved in every part. Pictures show both factory collection (so when new) + some of the updates which have been done. 📍 Available for inspection by appointment

Condition: new, functionality: fully functional, Year of construction: 2024, STAHL CRANE SYSTEMS Kec Rzg Ufjyl Ti Ijgewu SH5025-20 4/1 L3 Dcjdpfoyl Ti Uex Aftsd Wire Rope Hoist Machine Lifting Capacity: 5 Tons Lifting Height: 10 Meters Machine Axis: 1400 mm Lifting Speed: 0,8 / 5 m/min

Condition: new, functionality: fully functional, Year of construction: 2024, STAHL CRANE SYSTEMS SH5025-20 4/1 L3 Dcsdpfx Aoyl Ti Ijftjd Wire Rope Hoist Machine Lifting Capacity: 10 Tons Lifting Height: 10 Meters Machine Axis: 1400 mm Lifting Speed: 0,8 / 5 m/min