Used Wood Hog for sale (6,784)

Condition: used, Year of construction: 2023, operating hours: 600 h, functionality: fully functional, power: 55.16 kW (75.00 HP), overall weight: 3,500 kg, The BBT 400 Woodzilla is a compact, powerful, and mobile drum chipper with aggressive feed, mounted on a 3.5-ton tandem trailer chassis and capable of 360° rotation. Technical Data Year of manufacture: 2023 Operating hours: approx. 600 hours Power: Diesel, Deutz TCD 2.9, 55 kW (75 HP), Stage 5 Feed opening: 320 x 500 mm Drum size: 400 x 500 mm, 4 knives Maximum log diameter: 32 cm Stabilisation: 4-way hydraulic support Z-crane Ben-Tele 550 Crane outreach: 5,500 mm Telescopic stroke: 1,100 mm Radio remote control for chipper and crane Brake system: Overrun brake Kdodpfeykzlzex Ap Deu Weight: 3,500 kg The machine is in good visual and technical condition. Location: North Rhine-Westphalia Availability: by arrangement Warranty: The machine is sold as-is at the time of delivery. The seller assumes no liability for defects. We reserve the right to prior sale, modifications, and repairs. Didn't find the right machine? Please contact us!

Condition: excellent (used), Year of construction: 2007, Wood Cheaper for sale ! Manufacturer - BRUKS KLOCKNER Model - BK -DH 700X100 L Power - 2x500 kw el. motors Entry - 700x100 mm Number of knives - 6 Weight - 46 tons Equipment consits : - Input transporter 10 m - Metal detector - Cheaper - Output transporter Kdsdpfx Apjyzfigo Dsu - El. Cabinet - Comand pult

Condition: used, Year of construction: 1996, functionality: fully functional, Manufacturer: REINBOLD (Germany) Model: RHZR 1000 Type: Wood Shredder Motor: 18.5 KW Weight: 2470 kg Kdjdpfx Apsy Nw Idj Dou Size: 3140 x 2265 x H 2310mm Only 300 working hours, good condition, connected, can be inspected. Rotor 250 mm with 26 knives Screw conveyor to eject chopped scraps

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Kedpfeu R Sxxsx Ap Dsdu Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: ready for operation (used), Year of construction: 1995, A robust Mawera wood shredder including feed floor is offered. Throughput capacity: approx. 500kg/h, feed width: 844mm, drive power: 22kW, number of blades: 30, blade diameter: 64mm, motor speed: 1480rpm, control system: PLC, weight: approx. 2100kg, dimensions: approx. 2020mm/1650mm/1250mm. Inspection by appointment possible. Kdodpfxezmymbo Ap Dsu

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), Feed opening: 600 x 800 mm Hopper capacity: 0.6 m3 Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 blades, 30 x 30 mm Screen perforation: 15/20 mm or as required Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection rating: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start Kdsdpfoxru Hyex Ap Dou - Automatic shut-off in idle mode - Vibration-damping machine feet - CE-compliant - GS mark “dust-tested”

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Kdedoxr Tp Hopfx Ap Deu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1600x330x420 mm Weight 130 kg Total power requirement 1,1 kw Kjdpfev A Hwiex Ap Dedu

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,400 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Equipment: lighting, Containers shown in the images are in stock and available for immediate delivery. Inspection and collection are also possible. In this offer, we present the Villex Medium Wood Pavilion 2.0 container, suitable for use as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or site containers. Dimensions: 5 x 2.4 x 2.6 m Delivery: available nationwide Standard Features: Condition: New & Assembled Wood-look panels (as shown in the photos) Exterior walls: 50 mm thick Floor area: 12.0 m² Weight: 900 kg 1x door (glass) 2x floor-to-ceiling windows (1000 x 2000 mm) Electrical: - 3x power sockets, circuit breaker + fuse Kdjdpfxjy E Rxbe Ap Dsu Delivery is typically carried out using our own vehicles. Payment can be made in cash upon delivery to our driver or conveniently in advance via PayPal or bank transfer. For in-stock standard containers, nationwide delivery takes approx. 1–2 weeks from receipt of order, depending on the destination postcode. We manufacture and deliver custom containers within 1–4 weeks.

Condition: excellent (used), Deburring machine, 1 upper head, 3 kW motor 2 lower head, 3 kW motor 3 right head, 3 kW motor 4 left head, 3 kW motor 5 universal head, 0.37 kW motor 6 feed mechanism, 1.5 kW motor, 18 m/min Working height: 11 cm Kdodey Andcjpfx Ap Dsu Working width: 14 cm

Condition: like new (used), functionality: fully functional, AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working condition : excellent CE mark: YES instruction booklet: YES cutting diagram . see attachment with rollers tracks ( as in photo ) n.01 stop max.blade diam.mm.550 Kdjdozfggfepfx Ap Dju motor power Hp 10 volt. 380/50

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Advantages of the system Kdodpfezh Ti Ejx Ap Dju Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 45 kW (61.18 HP), Material shredding machine MHR 1030-45 kW Immediately available demonstration machine – as new condition For sale is a new material shredding machine MHR 1030-45 kW from our exhibition and demonstration stock. The machine is immediately available and can be inspected and demonstrated by appointment. Due to the elimination of the usual production and delivery times, the system is ideal for companies that require additional shredding capacity in the short term. Technical data Infeed opening: approx. 1,030 x 1,235 mm Hopper design: inclined Hopper volume: approx. 1.5 m³ Rotor diameter: 360 mm Rotor design: standard Cutting system: 25 concave knives + 25 square knives Screen size: 25 / 30 mm (optional) Main drive: 45 kW Power connection: 400 V / 50 Hz / 3 phases PLC control Control cabinet completely wired including 5 m connection cable Hydraulic slide with pressure bar Equipment Automatic star-delta start Automatic idle detection with shutdown Cyclic control to avoid unnecessary idle times Performance-enhancing step control for the hydraulic slide Vibration-dampening machine feet Solid base frame Kdodpjzhx Elsfx Ap Deu Control cabinet extension for integration of conveyor belt and overband magnetic separator Painting Machine body: RAL 9005 Deep black Hopper and drive guard: RAL 5012 Light blue Application areas Suitable for shredding: Wood and wood waste Plastics Packaging materials Production waste Commercial and industrial waste Recyclable materials for further processing ✔ New machine from exhibition stock ✔ Ready for demonstration ✔ Immediately available ✔ No production or delivery time ✔ Inspection and test run possible by appointment Price, net plus VAT Further information, videos or an individual offer can be provided upon request.

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Please refer to the attached expert report for details on the condition of the item. Kdedpfx Aozgc T Dsp Dju

Condition: like new (used), Year of construction: 2026, operating hours: 18 h, functionality: fully functional, power: 15 kW (20.39 HP), REUSER SD600 Industrial Shredder – Demo Machine with Less Than 20 Operating Hours Economically shred residual wood instead of disposing of it at high costs. Are you looking for a reliable solution for processing wood waste, cut-offs, pallets, chipboard, or other wood residues? With the REUSER SD600, you get a powerful industrial shredder in a robust, professional design – ideal for carpentry shops, joineries, timber construction companies, pallet manufacturers, sawmills, and recycling companies. Demo Machine – Almost Like New This unit is a demo machine with fewer than 20 operating hours. The machine was only used for a few weeks at a customer's site. The customer then decided to opt for a larger machine model. Take advantage of this opportunity now and secure this almost-new machine at a significant price advantage compared to a new machine. Your Advantages ✔ Demo machine with less than 20 operating hours ✔ Immediately available – no long delivery times ✔ Technically inspected and ready for immediate use ✔ Significant price advantage compared to a new machine ✔ Robust industrial design ✔ 12 months warranty ✔ Inspection and demonstration possible at any time Ideally suited for: Carpentry shops Joineries Timber construction companies Kdsdpsznuhvofx Ap Dou Sawmills Pallet manufacturers Furniture industry Plastic processors Recycling companies Disposal companies Suitable for: ✓ Solid wood ✓ Chipboard ✓ MDF ✓ OSB ✓ Pallets ✓ Wood waste ✓ Cut-offs ✓ Plastics ✓ Packaging materials

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Kedpjzc Hkyjfx Ap Dodu

Condition: good (used), Year of construction: 1993, Offered for sale is a used Zeno drum chipper, year of manufacture 1993. Type 1400x1600 mm. 97L-4538. Main motor: 75 kW, 1500 rpm. Hydraulic motor: 4 kW. Includes spare gearbox. Kedoyznahepfx Ap Djdu

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Kdsdpfx Ajyhzhzep Dju Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim Kdodpfx Aexc Rmqsp Dju

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Wood Splitter 30t HS-30PE PRO With a splitting force of 30 tons, the SCHORR HS-30PE handles even the toughest wood and large logs with ease. Its heavy-duty design (own weight 390 kg), low-wear hydraulic system, and high-strength steel frame ensure a long service life, ultimate stability, and reliable operation—even in continuous use. Combined Drive: PTO & Electric Motor The HS-30PE can be operated either via PTO (540 rpm) or the integrated 400V electric motor. This offers maximum flexibility: mobile operation in the forest with a tractor, or emission- and noise-free at the yard. Robust Design—Engineered for Heavy-Duty Use The construction features high-strength steel components and a stable splitting wedge guide. Sturdy support legs provide firm footing, and large transport wheels ensure easy relocation—even on uneven terrain. Splitting Length up to 110 cm Even long trunk sections are processed with ease. The solid splitting blade made of tool steel guarantees a precise splitting line and minimal wear. Integrated Timber Lifter—More Comfort & Safety The timber lifter allows easy, effortless positioning of heavy logs and also acts as a protective guard—greatly simplifying everyday work. Two Return Modes & Speed Settings -- Automatic Return: The splitting wedge automatically returns to the preset position—ideal for fast operation. -- Manual Return: For precise splitting, particularly with irregular wood. In addition, there is a fast advance mode and a slow, high-power mode for actual splitting. Practical Features for Everyday Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-handed safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-30PE -- Splitting force: 30 t -- Weight: 390 kg -- Drive: 400V electric motor (5.5 kW, 16A) or PTO Dimensions: -- Length: 1550 mm -- Width: 1150 mm -- Height: 2500 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Log diameter: max. 40 cm / min. 8 cm -- Wedge-ground clearance: 16 cm Kdjdpsw R N Hmefx Ap Deu Speed: -- PTO: Forward 5.5 s / Return 9.5 s -- Electric: Forward 7.5 s / Return 14.5 s Your Advantages at a Glance -- Ready for immediate use—no long waiting times -- Heavy-duty design—390 kg net weight for maximum stability -- Flexible operation—tractor or 400V connection -- Convenient timber lifter for handling heavy logs -- Spare parts always available -- Professional service & support Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Log Splitter 30t HS-30P PRO With a splitting force of 30 tons, the SCHORR HS-30P effortlessly tackles even the hardest woods and thick logs. The robust construction (370 kg own weight), a low-wear hydraulic system, and a high-strength steel frame ensure long service life, maximum stability, and reliable operation—even in continuous-duty applications. PTO Drive – Directly via Tractor Thanks to its PTO drive, the HS-30P can be directly connected to a tractor. This makes it highly mobile and independent of power sources—ideal for use in forests, meadows, or farmyards. The splitter operates with stable power transmission and a high-performance hydraulic pump that ensures fast splitting cycles. Durable Construction – Engineered for Tough Conditions The design relies on high-strength steel components and a stable wedge guide. Sturdy support feet provide secure footing, while large transport wheels make relocation easy—even on uneven ground. Splitting Length up to 110 cm Long log sections can be processed without issues. The robust splitting blade made of tool steel guarantees a precise split line and minimal wear. Integrated Log Lifter – Enhanced Comfort & Safety The log lifter allows for effortless lifting of heavy logs and simultaneously acts as a protective guard—offering significant relief in daily operations. Two Return Modes & Speed Settings -- Automatic Return: The wedge returns autonomously to the preset position—ideal for fast working cycles. -- Manual Return: For precise splitting tasks, especially with irregular logs. Additionally, a rapid advance speed and a slow, extremely powerful splitting stage are available. Practical Details for Everyday Use -- Retractable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-hand safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient transport with the tractor Technical Data Kjdpfxsw Smlpj Ap Djdu -- Manufacturer: SCHORR -- Model: HS-30P -- Splitting force: 30 t -- Weight: 370 kg -- Drive: PTO (540 rpm) Dimensions: -- Length: 1540 mm -- Width: 1400 mm -- Height: 2500 mm (retracted 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Splitting diameter: max. 40 cm / min. 8 cm -- Distance wedge-ground: 16 cm Speed: -- PTO: Advance 5.5 s / Return 9.5 s Your Advantages at a Glance -- Ready for immediate use—no long wait times -- Robust design—390 kg own weight for maximum stability -- Convenient log lifter for heavy wood -- Spare parts always available -- Expert service & advice Whether delivery or collection in 48465 Schüttorf—we offer the right solution.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) Kjdpfx Apew Ug Atj Dedu 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Kdjdpjd Dzahjfx Ap Dou 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Condition: used, -12 loading mouths/openings -4 decks -Integrated loader elevator -Operates on wood and gas -Sold with gas burner Kdodpfxex Up Nwj Ap Dju -With mechanical control -Voltage: 400V

Year of construction: 2003, condition: used, wood chip sieve Kdodpfx Aox Ta Nfjp Deu