Used Wood Hog for sale (5,211)

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Nodpfx Aeyhzhhsg Ijku Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: used, Year of construction: 1973, Weight 3 t x-travel 1000 mm 110 milling-head swivable +/- ja Nodpfjwzyt Tex Ag Ieku

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Nsdpfsyhzhzsx Ag Ioku Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Nksdpfoyhzhujx Ag Iou Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Nsdpjyhzhnjfx Ag Ioku Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: used, Year of construction: 2024, New demonstration machine! Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move • Cast flywheels with rubber coating and cleaning brush • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches • Self-braking motor • Two extraction ports Nkodpfxewggakj Ag Ieu Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Location in stock:

Condition: refurbished (used), Year of construction: 2008, operating hours: 3,119 h, Doppstadt DH 910 Panther - Year of manufacture: 2008 - Engine: Mercedes Benz - Operating hours: 3119 - Remote control - Weight: 25,000 kg Nsdpfx Agsygnnbs Ioku The machine is fully overhauled and immediately available.

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) Nksdpfx Agjyaalre Ieu (Prices may change with significant fluctuations)

Condition: excellent (used), functionality: fully functional, End tenoning machine Comec FT-CD-CA-680 Nsdpeychiksfx Ag Ijku Number of milling units per side: 1 Automatic material loading from feeder Template copying operation

Condition: excellent (used), functionality: fully functional, Complete, fully operational autoclave for pressure impregnation of timber. Tank dimensions: 11,500 mm x 2,500 mm – allows impregnation of approximately 20 m³ of timber per cycle. Complete pressure impregnation system including: - pressure vessel - working tank - vacuum and pressure pumps - loading system on trolley Nkodpfx Ajyhhxveg Iju - control system

Condition: used, Year of construction: 2017, first registration: 12/2017, We are offering this used UNTHA LR1000 wood shredder, year of manufacture 2017. Title: Shredder Model: LR1000 Serial number: LR106442 Year of manufacture: 11/2017 Nsdpfx Asyhzwpog Ioku Power: 30.0 kW Voltage: 400 V Frequency: 50 Hz If you have any questions or need further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 1,930 kg, Binderberger GI25EZ proline horizontal meter log splitter Year of manufacture: 2023 Weight: 1,930 kg Operation: electric or PTO Towable with secondary registration plate up to 25 km/h Nodpfeyg I Dpex Ag Ieku Splitting length: 130 cm Splitting speed (cm/s): forward: 25/27, return: 23/25

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, cutting length (max.): 600 mm, Automatic Wood Sawing and Splitting with the RM480-E from H&R. The H&R Wood Processor RM480-E is the ideal assistant for your firewood processing operations. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to its innovative design and powerful hydraulic system, operating this wood processor is significantly simplified—ideal for professional forestry operations and ambitious DIY users alike. Unlike competing models, with the RM480 from H&R, ALL functions are hydraulically operated, allowing for faster and easier workflow. Product Features RM480-E Performance: This processor is equipped with a robust 13 HP electric motor. Alternatively, it is also available with a 15 HP petrol engine (RM 480 B). Log Length and Diameter: Logs up to 3 meters in length can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths of up to 60 cm. Hydraulic System: The machine features a hydraulically lowering saw bar. The hydraulic log clamp ensures secure fixation of the wood during splitting operations. Hydraulic height adjustment of the splitting wedge is possible. You can choose between the included 4-way or 6-way splitting cross—for flexible splitting patterns and individual adaptation to your needs. Conveyor Belt: The new 2.2 m long feed belt makes loading logs easier, while the lateral swivel discharge conveyor makes the removal of split wood effortless. Mobile Operation: The processor—including trailer—weights just 750 kg and can be easily moved by hand thanks to its practical transport frame. Simple Operation: All functions can be conveniently operated hydraulically, enabling long working hours without fatigue. At a glance: • Sawing, splitting, and conveying in a single work step • All functions hydraulically operated • Efficient and powerful motor • Splits wood up to 48 cm in diameter and 60 cm in length • Can handle logs up to 3 m in length (with accessory table even up to 6 m!) Nodpfx Aeu Dkufsg Ioku Price Electric Motor (13 HP) RM 480 E (net) €7,550.00 Petrol Engine (15 HP) RM 480 B (net) €7,385.71 Additional Options With the optional lift table or a chain conveyor, logs up to 6 meters in length can be processed effortlessly. Technical Details Weight (incl. trailer): 750 kg Shipping cost: €300 (transport in iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. split wood diameter: 48 cm Max. split wood length: approx. 60 cm Max. log length: 300 cm Motor: Electric, 13 HP Hydraulic oil: 46 Hydraulic connections and control levers are pre-installed, making the machine operational in no time. Take advantage of the powerful and well-engineered technology of the H&R RM 480 wood processor. Order today and make your firewood processing more efficient, safer, and more comfortable!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Nkjdou Dnruepfx Ag Isu Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: good (used), wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: Ø 160 mm -Hole: Ø 60 mm, bolt circle Ø 85 x 9 mm -Number: 2x cutters available -Price: per piece -Dimensions: Ø 160 x 40 mm -Weight: 3.6 kg/piece Njdpfx Aovx Rfveg Isku

Condition: used, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation Nkodpfx Agjkia T Uo Iou -Drive: 4 kW -Cutting width: max.770 mm -Cutting height: max.400 mm -Saw band: length 5330 mm -Work table: pivoting -Dimensions: 1470/935/H2390 mm -Total weight: 743 kg

Condition: good (used), wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO quick clamping system with wood cutter -Hole: Ø 35 x 75 mm -Saw blade: Leuco 250x4.0/2.8x100Z48 202062 -Number: 2x recordings available -Price: per piece -Total dimensions: Ø 250 x 90 mm Nedpovx Rt Hjfx Ag Ieku -Weight: 12.5 kg/piece

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting Nkedpsh N Thwofx Ag Iou -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126012079 TT 303-2 802G 176 E23 -Outer milling cutter: Ø 180 mm -Height: 47 mm -Hole: Ø 60 mm -Bolt circle: Ø 75 x 7 mm Njdpfx Ajgfwfzeg Ijku -Number: 2x milling cutters available -Price: per piece -Weight: 2.5 kg/pc.

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Nkjdpfx Ajciv Tbsg Iou -Outer: Ø 180 mm -Height: 35 mm -Radius -Socket: Ø 30 mm -Weight: 5.6 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -AKE wood router bit with: AKE Hydro-Grip -Outer diameter: 165 mm -Height: 60 mm -Hole: Ø 40 mm -Cutter: 1 -Price/Sale: complete -Weight: 8 kg Nodpfx Agjcazr Ao Ijku

Condition: good (used), Wood router bit inserts, knife inserts, form cutter inserts Nkedpfx Aob A Sucsg Iju -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 15 mm -Price/Sale: complete -Weight: 0.9 kg

Condition: used, Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Wood Screws: Hex Head Wood Screws -Quality: DIN 571 galvanized steel -Sizes/number: M10 x 40 2080 pcs / M8 x 60 800 pcs -Manufacturer: Reyher/Diverse Nsdpsi E Agrsfx Ag Isku -Price: complete -Total weight: approx. 80 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 Njdpogfwfwsfx Ag Isku -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Year of construction: 1961, condition: used, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.780 mm -Cutting height: max.480 mm -Saw band: length 5600 mm -Work table: pivoting Nksdpfx Asmzkh Ijg Isu -Dimensions: 1420/920/H2400 mm -Total weight: 800 kg