Used Zprinter 650 for sale (5,935)

Condition: used, mileage: 149,700 km, power: 488 kW (663.49 HP), first registration: 10/2022, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, maximum load weight: 10,145 kg, empty load weight: 15,780 kg, tire size: 385/65R22,5, next inspection (TÜV): 10/2025, wheelbase: 3,900 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: full air, total length: 2,550 mm, total width: 4,000 mm, total height: 8,100 mm, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of seats: 2, construction height: 4,000 mm, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, truck registration, | VOLVO FH16 650 with Palfinger Epsilon S260Z96 | 2 extensions | I-Shift, retarder | Automatic, adaptive cruise control, emergency brake assistant, | Turning assistant, | Full-leather interior, leather steering wheel, | Air conditioning, multifunction steering wheel, cruise control, | On-board computer | 3rd axle lift | Rear overhang: 140cm | Wheelbase 3,900mm | Technically permissible max. axle loads: 1. 10,000kg 2. 10,500kg 3. 10,500kg | Technically permissible total weight when loaded in vehicle combination: 70,000kg | TÜV until 06/25 Seller: Christopher Glock German/English Mobile: Whatsapp) Mail: christopher. Entirestock/Complete stock at: Hofgasse25, A-4063 Hörsching | Errors, input and advance sales reserved. |Sales only to commercial customers | Trailer from Doll Type: M2K-9L Fin: 46110 | Wheelbase: 260cm | L/W/H in cm: 430/255/400 | Own weight: 3,370kg | Payload: 14,630 | Technically permissible max. axle loads: 1. 10,000kg 2. 10,000kg | Tires: 275/70 R22.5 on X-Lite aluminum rims | 2 single axles, make BPW, 10 t with disc brakes | Electronically controlled 2-line compressed air braking system | Weight via CAN bus to the truck display. | Stool model IX hydraulic steering with two double-acting cylinders between the stool and the front axle bogie (no Ratioplus) | 1x hydraulically extendable stanchions - hydraulic bolster lock | Connecting cables for 14m and 16m bolster stand | LED trunk end lighting with cable reel approx. 12m | Sockets: 15-pin socket for lighting/16-pin socket for control/7-pin EBS socket/7-pin socket for overlength lighting Bwsdpovmz S Aofx Aaqjw

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Bedpfsxdantsx Aaqoww

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Volvo TAD1642GE, General information Field of application: Construction Serial number: 40869782 Weights Empty weight: 4.950 kg Functional Generator capacity: 650 kVA CE mark: yes Other information Fuel consumption: 89.5 Liter/Hour at 75% Load Generator: Stamford S5L1D-E41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Transport dimensions (LxWxH): 4,9x1,7x2,6 Additional information Bedpfx Aoxbwwtsaqjww Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2022, cutting diameter 660 mm saw band length 9000 x 54 mm cutting width 1,6 mm Capacity 90° - round 660 mm Capacity 90° - square 650 x 650 mm Capacity 90° - rectangle 650 x 1080 mm Capacity 45° - round 660 mm Capacity 45° - square 650 x 650 mm Capacity 45° - rectangle 650 x 670 mm Capacity 30° - round 410 mm Capacity 30° - square 410 x 410 mm Capacity 30° - rectangle 650 x 410 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 7100 kg dimensions of the machine ca. 2500 x 2200 x 4500 mm The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Automatic Angle Rotation - PLC TouchScreen - Blade Breakage Switch / Stop System - Led Lighting - Swarf Conveyor - Carrying - 2 Pieces 2 Meter Roller Table - USB Connection Output Bodpfx Aougnyneaqeww Optional Specifications - Motorized system for roller table - Laser Line - Lubrication mist - Extra double roller table The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, Year of construction: 2025, functionality: fully functional, New machine 24 months warranty Advantages: + TOP price-performance ratio + robust, mobile base sheeter + operation with lever and pedal possible + suitable for all types of dough for rolling out and touring + PVC conveyor belts, easy and quick to clean + therefore also suitable for marzipan and rolled fondant + integrated electric motor + large digital display of the roller setting, instead of a mm scale on the lever + tables can be folded up on the left and right side + scrapers can be easily removed without tools + machine is equipped with 1 hand reel as standard equipment + Dough collecting trays made of stainless steel, on both sides of the table, can be pulled out + fast spare parts supply within 1-2 working days Technical data: - belt width: 650 mm - table length: 1.320 mm each = 2.640 mm - Roller adjustment: from 0.5 mm to 50 mm (depending on product) - speed: approx. 65 cm/sec - motor power: 1,1 kW - Connected load: 400 V - 3Ph - 50/60Hz - 16A CEE plug - Dimensions: --- Working position: 3100 x 1143 x 1248 mm (WxDxH). --- rest position: 1430 x 1143 x 2070 mm (WxDxH) Bwsdpfxohyc Ubs Aaqsw - Net weight: 310 kg optional available against surcharge: - Quick coupling for belt untensioning for easy cleaning of the belts Please note! This option cannot be added later, must be ordered when purchasing the new machine. + 370,-- € net - Flour catcher plates (2 pcs.) underneath the discharge tables + 210,-- € net

Condition: used, Year of construction: 2002, x-travel 650 mm y-travel 500 mm z-travel 530 mm table surface area 800 x 450 mm control Siemens 840 D control mit ShopMill spindle turning speed range 60 - 8000 U/min spindle taper SK 40 spindle taper DIN 69871 A table load max. 500 kg rapid traverse X/Y/Z axis 32 m/min ATC 30 Pos workpiece diameter at full load 80 mm tool diameter if 2 vacant positions 120 mm tool length - max. 250 mm weight of tools max. 7 kg total power requirement 30 kVA weight of the machine ca. 4,5 t Bjdpfxewd Txze Aaqoww dimensions of machine L x W x H 2,4 x 2,2 x 2,46 m Accessories:4th axe is prepared. Machin has shop mill function.

Condition: new, Year of construction: 2025, 3-seater - Engine: 2 cylinders, 4-stroke, water-cooled, displacement: 650 cc, power: 35 kW (47.6 hp) and more. Bodpfxsv I Uais Aaqoww

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Large radial saw for cross-cutting and edging boards. Quick conversion between double mitre cuts or cross-cutting. Robust swivel arm made of cast iron with replaceable hex guides. Saw unit tiltable to both sides up to 45°. Cutting height at 90° max 640x20/610x60 mm Cutting height at 45° max 380 x 100 mm Cutting height at -45° max 330 x 100 mm Cutting depth with motor at 0°/45°: 100/50 mm Saw blade diameter/bore: 350/30 mm Saw blade speed: 2800 rpm Bwedpjw I Utyjfx Aaqjw Table (LxW): 1675x1060 mm Motor 3 kW/400 V Weight: 220 kg Availability: short-term Storage location: Hochheim

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank Bjdpfedzqaaex Aaqjww - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Bsdpfx Asv Sf I Ejaqoww

Condition: used, mileage: 205,000 km, Year of construction: 2022, Serial number: YV2R002D7NA30xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20971 Truck specifications: Km: 205,000 Transmission: Automatic Suspension: Euro 6, 664 hp Good tires Engine brake/Retarder 6x4 Tipping semi hydraulics Toolbox Movable fifth wheel Bed TV setup Wheelbase: 340 cm Refrigerator Plenty of storage Radio/CD Climate/AC Video Bwsdpfx Aow Dap Hsaqsw   Description:Well-maintained Volvo FH650 truck.EU-approved and ready for delivery.The truck is a 6x4 and well equipped.Video is attached. Km: 205000 HK: 663 Technical approved: no EU-approved until: 03.08.2025 Own weight: 11040 Total Weight: 30000 Payload: 18960 Width: 255 Length: 731 Euro: 6 Model: FH16 650 Gearbox: Automatic

Condition: ready for operation (used), Year of construction: 1965, Gap-bed parallel lathe Brand: SCULFORT Model: FABRICAP 650 Year: 1965 Serial No.: 127751 Specifications: Distance between centers: 6,000 mm Swing over bed: 1,400 mm Swing over carriage: 1,000 mm Swing in gap (over 565 mm): 1,750 mm Tailstock quill diameter: 200 mm Tailstock quill travel: 400 mm Bar capacity: 12 mm Bwjdpfx Aoxbdldjaqjw Taper: Metric 100 Spindle speed: 2.5 – 250 rpm Admissible load between centers without steadies: 12,000 kg Admissible load between centers at 3 rpm: 20,000 kg Max. load on faceplate at 3 rpm: 5,000 kg Equipped with: 4-jaw chuck 1,700 mm 2 three-point steady rests dia. 300 to 600 mm 1 three-point steady rest dia. 600 to 1,000 mm Hardened guideways Digital readout Rapid traverse

Condition: refurbished (used), Year of construction: 2006, operating hours: 100 h, functionality: fully functional, cutting force: 650 t, power: 169.16 kW (229.99 HP), Sierra 650 SL Pre-compression: 100 t 230 HP Cummins 6-cylinder turbo diesel Shear capacity – 7 cuts per minute with empty shear head Bwodpfx Aevbq Enjaqew 4 cuts per minute with 24-inch cuts Shear output – 12–16 tons per hour Bale size – 32" x 24" x variable Bale weight – average 900 lbs Bale throughput – 10–13 tons per hour Package size – 32" x 24" x variable

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): Bwodpfx Ajxbyf Hsaqew • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm • Weight: 240 kg

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,400 h, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 40, mount diameter: 40 mm, Equipment: chip conveyor, High pressure 20 bar MACHINE EQUIPPED WITH: Bodpoxb Rtbjfx Aaqeww 4 vices + 40 cones + arbors + tools

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm Bodpfx Ajw Dbkreaqoww -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, power: 650 kW (883.75 HP), Woodchips fueled air heater. For grain kilns or industrial halls. Fully automatic with ignition. Have wery low hours- used only 2 seasons. Last 11 years stayd in dry room. Hydraulically driven grates for best burning process. Bwedpfx Aaswxq D Roqsw Has hydraulically driven storage, fan and all includings. Automatical ash conveying.

Condition: used, Year of construction: 1975, Accessories / Spare parts for an engine lathe Manufacturer: TADU, Origin Spain Model: F 650 Year of manufacture: approx. 1975 • Main spindle ASA Mounting A 1-8", spindle bore 60 mm Price: €1,495.00 • Drive unit (PIV gearbox) for the headstock with stepless adjustment Manufacturer: P.I.V., Bad Homburg, Origin Germany Bwodpfsctgb Tsx Aaqsw Model: MAS 3 On the TADU F 650, an additional intermediate gear has been installed. This enables a speed range of 8 - 42 and 40 - 200 rpm. Drive motor power 5.5 kW Price: €4,650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt Bwedpfxowy Rk To Aaqsw sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: good (used), BOSCH B 830 303 227 Bsdsquuptjpfx Aaqoww

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor Bwsdpfxow U N Ixj Aaqsw WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, functionality: fully functional, spindle motor power: 0 W, Horizontal Machining Center FAMUP Mod. MF 650 Spindle HSK 63 15,000 RPM 50-Position ATC Bsdpfxoxbczqs Aaqsww High Pressure Chip Conveyor Continuous Table Used, fully operational machine

Condition: good (used), Krauss Maffei 650 tonne electromotor Bwodsu Axinjpfx Aaqjw 100 kW 470 kg, 130x80 cm on europallet, H 700 mm Loher MOTOR JNGA from injection molding machine

Condition: used, Krauss Maffei Motherboard Bjdpou Axihefx Aaqjww

Condition: good (used), VT 5041-21/3-OD Bodpfx Aaeu Ilmksqoww