Used Zprinter 650 for sale (2,785)

Condition: new, cutting diameter 650 mm saw band length 7730 x 54 mm cutting width 1,3 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 750 total power requirement 5,5 kW / 750 Nm weight of the machine ca. 4550 kg dimensions of the machine ca. 2100 x 1550 x 3900 mm The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line Duodpfxsyk Ih As Anwet - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump Dujdpjphvl Tsfx Anwot - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam Djdpfjdzqaajx Anwsut - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Djdpfoyw Aa Uex Anwsut Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC turning/milling center with tailstock, driven tools and true Y-axis, ±70 mm, 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 with live tooling Max. rotational speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options for 65, 75, and 91 mm) Spindle bore diameter: 66 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Djdpfxjqa Dtfe Anweut Tailstock diameter: 110 mm / MK3 Tailstock traverse: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories: Coolant system Three-color warning light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar loader interface Video shows DT500

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine: ENGEL DUO 5550/650 pico Control System: CC200 Year of manufacture: 2011 Operating hours: 61,606 h 1. Clamping Unit Clamping force: 6,500 kN Tie bar clearance (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Max. daylight between platens: 2,050 mm Max. mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm Max. injection volume: 2,740 cm³ Max. shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio: 20 Screw stroke: 430 mm Max. screw speed: 148 rpm Plasticising capacity: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: Dujdpfeywrtwox Anwot - 4 pcs. (installed on the fixed platen) 5. General Specification Two-platen machine (DUO series) designed for the production of large plastic parts. The design ensures high rigidity of the clamping system and allows operation with heavy moulds while maintaining a large opening stroke. The CC200 control unit enables precise process parameter control and integration with automation systems and peripherals. If you wish, I can also prepare: - a sales offer version (more marketing-oriented), - translation into German or English, - or a market value assessment of this machine.

Condition: new, Year of construction: 2025, machine/vehicle number: 40869782, fuel type: diesel, motor manufacturer: Volvo TAD1642GE, General information Field of application: Construction Weights Empty weight: 4.950 kg Dusdpfx Aexbwwtenwet Functional Generator capacity: 650 kVA CE mark: yes Other information Fuel consumption: 89.5 Liter/Hour at 75% Load Generator: Stamford S5L1D-E41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 900 l Transport dimensions (LxWxH): 4,9x1,7x2,6 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: excellent (used), Year of construction: 2007, Universal milling machine Manufactured by KUNZMANN. WF 650 Year of manufacture 2007 Technical specifications Manufacturer Kunzmann Type WF 650 Year of manufacture 2007 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Clamping area 1000 x 600 mm Spindle mount SK 40 Spindle speeds 5 - 6500 rpm Quill stroke 60 mm Vertical head swivels +/- 90 Max. table load 400 kg Feed rates - longitudinal/transverse/vertical 0 - 4000 mm/min Rapid traverse 25 / 25 / 20 m/min Distance between table and vertical milling spindle 100 / 550 mm Distance between table and horizontal spindle 270 / 720 mm Number of tool magazine positions: 20 Tool diameter: 95 mm Tool diameter with 2 free positions: 135 mm Max. tool length: 300 mm Max. tool weight: 7 kg Spindle power: 13 kW Total power requirement: 20 kVA Machine weight: approx. 5.5 t Machine dimensions: L x W x H: 3.80 x 2.70 x 2.40 m Equipment - Heidenhain iTNC 530 control system - Operating instructions - Enclosure - Vertical head with extendable spindle sleeve - Hydraulic tool clamping Dedpfx Anjwhm S Nswout - Fixed table - Electronic handheld control panel - Coolant system - Chip conveyor All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, warranty duration: 6 months, Dishwasher Winterhalter GS 650 Energy+ Winterhalter Model: GS 650 - Freestanding unit, stainless steel construction - 3 wash programmes - High-performance pump - 1 wash rack - Pressure boosting pump - Rinse aid pump & detergent pump Large tank with Energy+ heat exchanger Connection: 400 V, 32A-CEE plug Dimensions: 755 x 880 x 1780 / 2350 mm (W x D x H) Used machine, cleaned with warranty + spare parts service Quality from a specialized company! Benefit from over 35 years of experience! Options: Water filter Dodpfx Anexduw Ajwjut Delivery Maintenance contract Service package Spare parts box for extra safety Training & commissioning Visit our large showroom!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, General Data Machine weight 14000 kg Measurements height 2355 mm Dimensions Machine Length 7800 mm Injection Unit Screw diameter 105 mm Dedpfsx Nr R Hjx Anwjut Clamping Unit Clamping force 6500 kN This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Condition: new, cutting width max 610 mm Duodpoyi Hthjfx Anwjt Cutting height max 200 mm Saw blade diameter 650 mm Motor output 11 kW

Condition: used, Year of construction: 1997, Technical Data: Year of Manufacture: 1997 Brand: Johannsen Manually operated machine, mobile on steering castors Dusdpfxeyfnrwe Anwet The machine is powered up and can be inspected by appointment! Max. working width: 650 mm Max. clearance height: 40 mm Min. clearance height: 0.5 mm Set feed height: max. 40 mm Workpiece length: 500 mm - unlimited Working height: approx. 900 mm Drive power: 0.75 kW Feed speed: approx. 7.9 m/min Operating voltage: 400/230 V, 3Ph / N / PE 50Hz Accessories/Special equipment: Underside film application Infeed roller conveyor 650 x 1200 mm, mobile, with omnidirectional rollers and adjustable lateral roller stop, non-driven Outfeed roller conveyor 650 x 1200 mm, mobile, with rubber-coated rollers, driven Machine frame (welded steel construction) equipped with all necessary safety devices. Safety light curtains at infeed and outfeed – easily accessible for film threading 1 standard upper film unwinder Feed direction from right to left Operator side left in feed direction For film with a tendency to crease, a spreading roller (available at extra cost) must be used.

Condition: used, Year of construction: 1975, Accessories / Spare parts for an engine lathe Manufacturer: TADU, Origin Spain Model: F 650 Year of manufacture: approx. 1975 • Main spindle ASA Mounting A 1-8", spindle bore 60 mm Price: €1,495.00 • Drive unit (PIV gearbox) for the headstock with stepless adjustment Manufacturer: P.I.V., Bad Homburg, Origin Germany Model: MAS 3 On the TADU F 650, an additional intermediate gear has been installed. This enables a speed range of 8 - 42 and 40 - 200 rpm. Drive motor power 5.5 kW Price: €4,650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Dusdsctgb Tepfx Anwot

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Duedpfx Ansxzgkiowjt Swarf Conveyor Coolant System

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Dedpfx Asxzi D Sonwsut Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: new, Main features of the machine: The TOP CUT 650 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system Duedpoii Rydofx Anwot -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 650x300 mm Transport belt width: 625 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Return belt dimensions: 5460 x 330 mm Saw band diameter: 710 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 7 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 22 kW Total power: 25 kW Weight: 2600 kg Dimensions: 2800x2400x2000 mm

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: 7203065, +++demonstration machine BJ 2017+++ +++other color+++ Slight contamination in the dirty water tank. Extremely maneuverable - turning maneuvers on the spot. -Multiple small disc brushes with increased contact pressure -Battery-powered ride-on scrubber-dryer with automatic drive and disc brushes -The very compact size gives this model the handiness needed to work in confined spaces, as you can easily maneuver around obstacles -Instrument panel with controls -Mechanical operation of brush, suction bar and water quantity by means of levers -Tiltable dirty water tank for easier cleaning -Multiple small disc brushes, with suction bar directly behind them, enable a short design and very small turning circle -Disc brushes with their own motor increase the contact pressure -Automatic unhooking of the suction bar in case of accidental impacts protects against damage #Scrubbing machine #cleaning machine #Cleancraft #cleaning machine #cleaning machine #ride-on scrubber-dryer Dodpfx Aofzk Ezsnwsut #ride-on machine

Condition: used, machine/vehicle number: 16674, Year of construction: 2016, operating hours: 7,566 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, load center: 500 mm, construction height: 2,880 mm, fork length: 1,200 mm, overall weight: 6,112 kg, enginetype: Electric, manufacturer: Jungheinrich Duedpexwf Raefx Anwet

Condition: used, Year of construction: 2007, Technical details: Dedpfx Asvap Sksnwsut weight of the machine ca.: 3 t measurement range X =: 650 mm measurement range Y =: 1200 mm workpiece weight: 700 kg traversing speed: 200 mm/s capacity: 1000 VA Design: Portal measuring center with fixed measuring table and laterally driven portal, measuring table, traverse and quill made of granite. All axes are equipped with high-precision air bearing guides. It is driven by DC servo motors. Control: 3-5 axis microcontroller with vector path control Measuring system: Incremental length measuring system, resolution 0.5 m Computer: Industrial PC, Pentium class, Windows 2000 operating system, multilingual Software: MarSoft Vision 3D multisensor 3D, measuring software *

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Dsdpfx Aoub S R Honwsut Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Winkelschweißmaschine /Semi-Automatic Foil sealing machine Kallfass KC 8060/650 Großformat Winkelschweißmaschine / Large Size Foil sealing machine Baujahr / Year 1985 - Serial-No. V 7.85.029 Schweißrahmenabmessungen / Sealing Frame size 600 x 800mm Schrumpftunnel Abmessungen Breite 710mm und Höhe 290mm Shrink Tunnel Dimensions Width 710mm and High 290mm Durchlasshöhe Produkte 280mm Folie, Halbschlauchfolie 12 - 80 μm Transportbandgeschwindigkeit 2,5 - 12 Meter / Minute Verpackungsleistung, max. 20 Takte / Minute Spannungsversorgung 208 - 480 Volt Duedpfjv Hp R Hox Anwot Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Dusdpfx Aneyg N Hljwet Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Condition: used, Year of construction: 2006, cutting diameter 650 mm saw band length . mm cutting width 1000 mm Cutting height 650 mm weight of the machine ca. 6,4 t Cutting speeds: 16–170 m/min Working area: approximately 670 mm Material support height: 700 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale Duedjyqu Sujpfx Anwet apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M Dedowg Axvspfx Anwjut -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot Duodpfx Aor Ha Dvenwjt - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg