Section Shear - Combined

MUBEA KBL 45-20

Condition: good (used), Alzmetall Pillar Drilling Machine AB 35 - with thread cutting device + automatic feed Dwsdexa H A Ajpfx Ah Usd Good condition, fully functional, can be inspected and tested under power on site. International shipping available. Inspection: As a general note, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed above or below at any time. Subject to prior sale and errors in the description. VAT will be itemized separately on my invoices. Shipping via freight carrier.

Condition: good (used), punching force: 70 t, Punchingpower: 70 Ton Punching capacity: Ø 28 in 20 mm steel Throat: 300 mm Cuttingcapacity: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flatsteel 45 mm round bars Notching: 100 x 13 mm Featured with: - Elektric stop 1000 mm - Various tooling and accesories - 2 Cylinder machine Country of origin: Spain Dwodpfsuby Slox Ah Ujd Motor power: 7,5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm Djdpfjg Eubnox Ah Uowd - blade length approx. 250 mm - Profile steel shear cuts angles - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm - square steel 90° up to 30 mm - Notching device sheets up to 8 mm - Hole punching machine - pressure capacity approx. 50 t - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t Dwsdpfx Aol R Nnnjh Uod dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm Dwedpfx Ahsm Twgwe Usd cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Year of construction: 2000, condition: used, Muhr and Bender KLS 1100 Punching capacity 110 clay Diameter x sheet thickness Ø 40 in 22 mm throat 500 mm Max. hole diameter 80 mm Maximum cutout thickness 22 mm Knife length 500 mm Max material thickness by notching 16 mm Motor power Dodpolzc Dcsfx Ah Uowd 8 kW Weight 5500 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min Dwsdpfx Ahspuy H De Uod - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), functionality: fully functional, BEYELER HYDRAULIC BENDING MACHINE 3000X100 TON. MOTORIZED REGISTER, 3 AXES. RECESS 250. DIMENSIONS: 350X160X245 cm (H), WEIGHT 6,500 KG (65 QL.) Dsdsvxif Ispfx Ah Ujwd

Condition: used, Grinding length 600 mm Grinding width 350 mm Dwjdpfx Asvk T Sceh Usd Magnet size 600 x 200 mm Workpiece height 450 mm Table speed 1 - 30 m/min Feed automatic 1 - 60 (transverse) mm/stroke Rapid traverse (transverse) 1.2 mm/min Machine weight approx. 2,450 kg

Condition: new, functionality: fully functional, Year of construction: 2025, ELECTROSTATIC POWDER COATING OVEN Dedpfx Ahev Nvy Te Uewd Our experienced team prepares powder coating box ovens in special design and special sizes for each project. Please contact us for detailed information