CNC Turning- and Milling Center

MURATEC MT 12 Gantry

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Crodpfey R A N Ajx Ak Aji Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately Credpfx Akjycvaqo Asi

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) Cedpfxowmwrdo Ak Aeri with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Crsdpfx Akswbgins Aji Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 9 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 6.7 / 10.7 [kW] - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - Z stroke : 305 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 3.7 / 5.5 [kW] - Spindle speeds : 6400 [rpm] - Max. bar diameter : 30 [mm] - C axis indexing precision : 0.001 [°] - X stroke : 140 [mm] - Z stroke : 300 [mm] TURRET 1 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/300 [mm] - Y stroke : -40/+25 [mm] TURRET 2 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/320 [mm] - Y stroke : -25/+40 [mm] POWER SUPPLY - Total installed power : 28 [kW] WEIGHT & DIMENSIONS Codpeypxqrefx Ak Aori - Machine floor space : 3870 x 1670 [mm] - Machine height : 2500 [mm] - Machine weight : 6000 [kg] MACHINE HOURS - Number of hours under power : 23240 [h] - Number of working hours : 19500 [h] EQUIPMENT - CNC : Traub TX 8i-p - 3 colors status lamp - Coolant tank : 500 [l] * with high-pressure pump : 3,8,20 [bars] * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Predisposition for barfeeder

Condition: ready for operation (used), Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible. Cedpfx Ajykuucjk Aeri

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Cjdpfxsxlngao Ak Ajri Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, Year of construction: 2004, Technical details: Crodpfjw Dud Sox Ak Aei x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 *

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Cjdpfsu Ngybjx Ak Ajri Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Crsdpfx Aksz Hmxne Aji Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.