Twin-headed Stapler for Booklets - Pads

Nagel Multinak

Condition: used, Multinak S double-head stitching machine with electric drive for stapling brochures and pads up to 27 mm Djdpfxsygwdrs Afnoun Good condition several stitchers currently in stock available at short notice

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: Dusdpfx Aerz Nflefnsn - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Year of construction: 1982, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Duedpfx Aeh Ax H Rsfnon On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 14069, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Nagel Multinak SYear 1994 - Serial-No. 14069 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dedjh Axppepfx Afnsun On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Dodpfx Afjt Hwupenoun Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: used, machine/vehicle number: 18086, Doppelkopfheftmaschine - 2 Stitching heads Stapler Nagel Multinak S Mit der MULTINAK S Doppelkopfheftmaschine mit elektrischem Antrieb heften Sie Broschüren und Blocks bis 27 mm Stärke, für Block- und Sattelheftung. Dujdpfx Aoh Axqxsfnon Electric stapling machine with two stapling heads with adjustable distance for block and saddle stapling for brochures in medium to high work volumes, for flat and saddle stapling stiting. Baujahr / Year 1996 Heftköpfe AS für Blocks bis 15 mm / Stapling head AS blocks and brochures up to 15 mm  Heftkopfabstand verstellbar im Bereich von / Distance adjustable between 80-155mm Heftklammernlänge / Staples arm length 6-30mm Heftklammernsorten 24, 26, 50 + Ringklammern / for staples no. 24, 26, 50 and ring staples Technische Daten / Technical Details: Anschluss / power supply 400 V / 50 Hz Maße / Dimensions Width 600 x Deep 750 x Tall 1100mm Gewicht / Weight net 100kgs Flaches Anlegen der Heftklammern durch bewegliche Umbieger / moveable bending tools ensure that staples lay flat Einfaches Kippen des Arbeitstisches ermöglicht schnellen Wechsel von Block- auf Broschürenheftung / change-over from flat to saddle stapling is made by simply flicking over the table Maschine ist für Dauerbetrieb ausgelegt - geräuscharm durch Spezialgetriebemotor / for long term use, low noise level through special gear motor Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1990, machine/vehicle number: 1259895, Heftmaschine Serial-No. 1259895 Online-Video-Inspection by Skype-Video Dodpfxotzc Nhj Afnjun We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Weipert Crankshaft Grinding Machine Grinding Bench Weipert Grinding bench Centering point: Röhm 110 H MK5 machine length: 5900 mm Duodsihfr Iopfx Afnon More grinding machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 1980, machine/vehicle number: 6236, Doppelkopfheftmaschine für Broschüren - Blocks - Twin-headed Stapler for Booklets - Pads Nagel MultinakYear 1980 - Serial-No. 6236/1 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dsdpfx Ajh Axptjfnsun

Condition: used, machine/vehicle number: 378, Twin-headed Stapler for Booklets - Pads Booklet & block stitcher Nagel Multinak-S (18096)Serial-No. 18096 Online-Video-Inspection by Skype-Video Duodpfxsh Axq Ue Afnsn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2024, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Dusdpfjvmpnlex Afnjn Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Condition: used, machine/vehicle number: 912768, Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Nagel Multinak SSerial-No. 18093 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Dedpfx Aeh Axq Asfnjun Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dodpfx Aoh Ax H Hjfneun

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Main dimensions: Duedpfxonacu Do Afnjn W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dedpsh Axyvefx Afnjun