Horizontal CNC lathe

Nakamura-Tome WT-150

Condition: excellent (used), The machine is in very good condition and has low operating hours. Hnslhjydvi Iecdw Doh

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Hslhcjwcfgbsdw Donh Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2007, functionality: fully functional, CNC Control: Fanuc 18i-TB Travel X-axis (mm): 157.5 Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increments) Turning length (mm): 399 Max. turning diameter (mm): ø190 Distance between spindle noses (mm): 750 Spindle bore (mm): 65 Upper turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Lower turret: Number of tool stations: 12 Max. speed of driven tools (rpm): 6,000 Driven tool power (kW): 5.5 / 3.7 Main spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle: Max. spindle speed (rpm): 4,500 Hnslhcex Rvivodw Doh Spindle drive power (kW): 11 / 7.5 Equipment: Parts catcher Bar feeder: LNS HYDROBAR SPRINT Rated power (kVA): 67.2 Basic machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000

Condition: used, Year of construction: 2005, functionality: fully functional, CNC Control: Fanuc 18i-TB Travel X-axis (mm): 157.5 Travel Y-axis (mm): 35 Travel Z-axis (mm): 464.8 C-axis: 360º (0.001º increment) Turning length (mm): 399 Max. turning diameter (mm): ø 190 Distance between spindle noses (mm): 750 Bar working capacity (mm): 52 Upper turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Lower turret Number of tool stations: 12 Max. speed driven tools (rpm): 6,000 Driven tools power (kW): 5.5 / 3.7 Holex Rvipshcdw Denh Main spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 15 / 11 Sub spindle Max. spindle speed (rpm): 4,500 Spindle drive power (kW): 11 / 7.5 Equipment Parts catcher Bar feeder LNS HYDROBAR SPRINT Nominal kVA: 67.2 Base machine: Dimensions / Weight Length (mm): 3,675 Width (mm): 2,258 Height (mm): 1,885 Weight (kg): 9,000

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Helhcdwjia Rtdo Dsnh Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 5,500 W, spindle speed (max.): 6,000 rpm, total height: 1,858 mm, product length (max.): 3,675 mm, number of axes: 7, General Data Measurements height 1858 mm Dimensions Machine Length 3675 mm Main Drive Number of axis 7 Spindle Speed 6000 RPM Spindle motor power 5.5 kW Technical Specification Hnsljx Ixigjhcdw Doh Driven Tools yes This 7-axis NAKAMURA Tome WT150 II was manufactured in 2020, featuring dual 12-tool turrets and motorized positions for enhanced flexibility. It includes a high-pressure coolant pump and a bar feeder interface with an LNS Quick Load Servo 80 S2. Ideal for complex turn-mill operations, consider the opportunity to buy this NAKAMURA Tome WT150 II turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Hjlhjw Tg Adscdw Donh Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: used, Year of construction: 2011, functionality: limited functionality, bar passage: 51 mm, overall weight: 6,000 kg, bar capacity 51 mm – three turrets – three Y axes – fixed/driven tool holders – LNS Sprint 552 bar feeder new in 2011 – Fanuc Control Helhcjwvvyrjdw Djnh

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain, rotational speed (max.): 12,000 rpm, Vertical machining center YCM NXV600A - demonstration machine Control: Heidenhain TNC620 Spindle: 12,000 rpm SK40 17kW Holhcdjvvuh Ajw Donh Coolant system with IKZ20 bar Handwheel Tool changer: 24-way Chip conveyor The machine is located at our location in Soltau and can be viewed in operation at any time!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Hnelhouy Ifgscdw Dsh Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)