CNC lathe

Okuma LC40-1SC

Condition: used, Year of construction: 2008, x-travel 410 mm y-travel 570 mm z-travel 140 mm control Mazatrol Matrix Maximum working diameter 545 mm Maximum working length 519 mm main spindle speed 35 - 6000 U/min Bwedpfx Akeyt R Idsxsl tool taper Capto C6 rapid traverse y/x/z axis 30/26/33 m/min Performance/capacity: Max. swivel range: 545 mm Max. machining diameter: 545 mm Max. outside diameter for bar work: 51 mm Max. machining length: 519 mm Max. workpiece weight: -Chuck work: 150 kg -Bar work: 200 kg Main spindle: Spindle speed: 35-6000 rpm Spindle bore diameter: 61 mm Max. torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (advance/return): 434/281 mm Milling head: Milling head type: Single spindle with ATC Tool shank type: Capto C6 Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mm Milling spindle speed: 15-12000 rpm Equipment/accessories: -Chip conveyor -Mist extraction -Tools -Documentation

Condition: good (used), Year of construction: 1989, Universal head (U-25) Coolant system Hydraulic tool clamping X-Axis: 5000mm Y-Axis: 1200mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 7000 Power on spindle:19kW Spindle speeds: 14 - 2500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:7000mm/min. Length: 11225mm Width: 4100mm Height: 3200mm Weight: 19000kg Bwsdpfx Aowq Rkuekxel

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Bwjdpfsyna Uiox Akxel A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Bjdpfoyt Nvtjx Akxswl Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: used, Year of construction: 2003, turning diameter 350 mm turning length 1186 mm control Fanuc Bwodpfx Asynnt Hokxsl

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe DOUBLE TURRET Model ZL-45 B Year 1991 CNC Fanuc Bwedpfeypb Nkox Akxol Sold complete With documentation With chip conveyor

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 26,100 W, total height: 2,083 mm, total width: 1,971 mm, overall weight: 8,800 kg, controller manufacturer: FANUC, controller model: 18-TA, product length (max.): 4,191 mm, number of axes: 2, Horizontal CNC lathe with tailstock manufactured in 2004. This Takisawa TS-35 features a maximum turning diameter of approximately 400 mm and a turning length of 1000 mm. It is equipped with a powerful 26.1 kW main spindle motor and a chuck size of 304 mm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-35 machine we have for sale. Contact us for further details. • Distance between centers: 1000 mm • Swing over bed: approx. 400 mm • Maximum turning diameter: approx. 350–400 mm • Maximum turning length: 1000 mm • Spindle: • Chuck size: 304 mm • Spindle bore / bar capacity: approx. 104 mm • Turret/tooling: • Number of stations: 10 • Boring bar capacity: approx. 40–50 mm • Tailstock: Manual quill for long shaft support Technical Specification Counter Spindle No Bedpfx Aoyt Rtgskxswl Driven Tools No

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Bodpeyttwzsfx Akxowl

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Bwedjxxh Udepfx Akxel Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty