Single-head cutting machine

OMC GIOBI 600

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning Knjdpfxoidlpio Agzjf • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Year of construction: 2018, condition: as good as new (ex-display), Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Optionally available: - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system - Other accessories on request We will be happy to make you an offer tailored to your requirements. Knjdpfxed Rhzwo Agzjf The machine can be inspected and tested in 56812.

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: Knjdewhu Hhopfx Agzof working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm Knodsvwgnwspfx Agzjf dimensions of the machine ca. 4800 x 1100 x 1500 mm The double tiller saw is in very good condition and has only been used very little use.

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm Knjdpolgvkiefx Agzof - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Kodpfx Aegwt S Tegzonf Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system Knedpfxshrukie Agzjf - integral pneumatic protection

Year of construction: 1989, condition: excellent (used), Sägeblattdurchmesser: 350 Ksdoff Snbspfx Agzonf

Condition: like new (used), Year of construction: 2003, functionality: fully functional, total length: 52,000 mm, total width: 24,000 mm, total height: 10,500 mm, input voltage: 400 V, working height: 1,050 mm, overall weight: 2,000 kg, compressed air connection: 6 bar, drill diameter: 180 mm, air pressure: 6 bar, input frequency: 50 Hz, type of input current: AC, power: 2.5 kW (3.40 HP), 8 Sep | Drilling machines Ksdperg E Hcefx Agzonf METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Technical data: glass thickness 2-50 mm bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm maximum measurement machine frame to drilling center:

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Max. Glas-height: 2.000 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks Ksdpowd Raisfx Agzsnf incl. vacuum system for drying zone LED lights on the outled for inspection