Pasteurization line

Pasteurization line

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Cjdpfeua Tbwex Aktori Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SF100s.01.26, screw diameter: 200 mm, total length: 3,200 mm, total height: 2,200 mm, overall weight: 400 kg, heating capacity: 10 kW (13.60 HP), pressure: 2 bar, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, warranty duration: 24 months, Machine for cheese streching, dozing, mozarella and other. Crsdpst I Dxwofx Aktsi

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS Cjdpfoua Dqiox Aktori - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, total length: 1,250 mm, total width: 780 mm, total height: 1,350 mm, input frequency: 50 Hz, overall weight: 580 kg, power: 8 kW (10.88 HP), - Year of manufacture 2013 or 2015, in well-kept condition, from a small craft bakery, see also photos, technically and optically very good, checked and cleaned, new design with powerful 4 / 8 kW motor. - for up to 120 kg dough or approx. 75 kg flour - with 2 digital Diosna timer and 2 speeds - powerful 4 and 8 kW motor of the latest design - incl. protective cover (also available without intervention), bowl and kneading spiral in stainless steel Crsdpfxowh Scge Aktei - technically and optically in very good condition Dimensions: approx. width 78 cm, depth 125 cm, height 135 cm, weight approx. 580 kg Price: BJ 2013: 8.450,- EUR netto ex warehouse Bergkamen BJ 2015: 8.950,- EUR netto ex warehouse Bergkamen Currently also refurbished and repainted or as SP 80 (new version) or 160 D in stock. Please enquire if you are interested.

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers Credpfx Akjiyytqotoi compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Very good condition, directly from production!!!

Year of construction: 2024, condition: new, AMF Reece S4000-ISBH AMF Reece S4002-ISBH AMF Deco 3000 ATT Motor DC Drive Sewing Speed 1,500 - 3,800 spm Stitch Type Single Thread Chainstitch Stitch Density 3 - 12 s/cm (8 - 30 spi) Stitch Bite 1.7 mm - 2.3 mm (1/15" ~ 3/32") Number of Buttonholes 1 - 8 Distance between buttonholes 4 - 63 mm (3/16"~2-1/2") Adjustable in Program Buttonhole Length 15.8 mm - 25 mm (5/8" - 1") Max Distance from Edge 67 mm (2-5/8") Max Distance First to Last Buttonhole 63 mm (2-1/2") Angle Adjustable 0~6° Thread Trimming Pneumatic Recommended Thread Core Spun Polyester #50 Recommended Needle AMF Reece Series 750 #90/14, #80/12, #70/10 Clamp Height 12.7 mm (1/2") Max Work Thickness 3 mm (1/8") Cjdjtp Nwbepfx Aktori Clamping Step Motor Lubrication Semi-Automatic Control System PLC Table Types Crosswise Electrical Requirements 230V, 50/60Hz, 1 Ph Air Requirements 5.5 basr (80psi) 14ℓ/㎥ (0.5cfm) Dimensions Head and Table 1100 mm(L) x 600 mm(W) x 710 mm(H) Dimensions Packed Weight 1300 mm(L) x 770 mm(W) x 1150 mm(H) 171kg

Condition: used, Year of construction: 2008, The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it: - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products. - Applications: It's typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese. - Specifications: Although specific technical specifications can vary, common features might include: - Capacity: Often measured in liters per hour, indicating the amount of milk it can process. - Pressure Ratings: The operating pressure used during the homogenization process. - Material: Typically made from stainless steel for hygiene and durability. - Efficiency: The H3075 model is known for its efficiency in energy consumption relative to its output and performance. - Maintenance: Regular maintenance is required to ensure optimal performance, including cleaning the unit and checking parts for wear. Capacity: 10,000 Litres per hour Pressure: 200 Bar Stages: 2 Cedex Aa Spspfx Aktjri Electrical Requirements: 380/50 Hz Max KW : 75 Amps Requirements: 137 A Condition: Very Well Maintained Full Service in 2025

Condition: ready for operation (used), Year of construction: 2008, A complete filling line from filler to packer is available. Format: Gable top/pyramid pack 0.50l/0.75l/1l, output: approx. 7000 packs/h, dimensions X/Y/Z: approx. 9500mm/3200mm/3500mm, weight: approx. 13000kg, operating hours: approx. 32500h. Applicator: 3x Elopak E-PLA-S30, year of construction: 2009, air pressure: 700kPa, weight: approx. 1000kg. Packer: Oystar A+F Traypacker TF, year of construction: 2011. Cjdpfxetul Ras Aktsri

Condition: used, functionality: fully functional, Complete nailing line Automatic block feeder and cutter Automatic block loader Crodpfx Aewhftfsktoi Nailer Turner Nailer Corner cutter Electric marker Chamferer 90° rotator Turner Stacker Output transfer

Year of construction: 2025, condition: new, functionality: fully functional, cutting width (max.): 1,500 mm, spindle speed (max.): 700 rpm, spindle speed (min.): 60 rpm, warranty duration: 12 months, Equipment: rotational speed infinitely variable, TGM-1250 Expanded Metal Mesh Machine Expanded Sheet Press is suitable for both plate production and integrated production with Roll tape. Expanded Metal Press is preferred for the best performance electronic products. Expanded Metal Machine is operated with 1 operator control. Materials that our Expanded Metal Machines can process; DKP, HRP, Aluminum, Stainless etc. By entering the quantity and stroke values you want to produce on the control screen, your production will be provided automatically. Without cutting your expanded metal products, you can make hollow production by entering the desired gap dimensions between PLC control screen. Our machines are speed controlled, adjusted according to the material to be processed and the mold. The expanded sheet machine is automatically lubricated by the oil tank as all moving machine elements. (All moving elements of the expanded sheet machine are automatically lubricated with the help of the oil tank) Our Expanded Metal Machines; Suitable for filter wire production, culvert wire production, suspended ceiling mesh production, aluminum facade mesh etc. You can contact us for Expanded Metal Machine For Sale, Expanded Sheet Press For Sale, Baklava Sliced Perforated Press For Sale. THRA - 1250 - DECOILER (HYDROLIC) Acts with sensors connected to the expanded sheet metal press or other machines. In accordance with demand, internal clamping system can be produced mechanically and hydraulically. V type hydraulic loading trolley can also be integrated into the machine. Cedpfxswihwpe Aktjri We manufacture in 500, 1000, 1250, 1500 mm and different capacities. You can contact us for Roll Forming Machines for Sale, Roll Forming Machines for Sale. TGE-1250 - Expanded Metal Flattener Machine Expanded Sheet Flattening Flattening Machine is suitable for both plate production and integrated production with Expanded Sheet Press. The expanded metal flattening ironing machine can be precisely adjusted on both sides. All of our Flattening-ironing machines are made of special solid steel material and special heat treatments are applied. Irons the thickness of the expanded metal to the raw material thickness of the sheet. Materials that our Expanded Metal Flattening Machines can process; DKP, HRP, Aluminum, Stainless etc. You can contact us for Expanded Metal Flattening Machine for Sale, Expanded Sheet Metal Flattening Machine for Sale and Perforation Flattening Press for Sale with Baklava Slices. It does not damage and wear the roll bands. We also provide custom designs by offering engineering solutions in line with customer demand. TGD - 1250 - Expanded Metal Leveler and Straightening Machine Expanded Sheet Leveller and Straightening Machine is suitable for both plate production and integrated production with Expanded Sheet Press. The expanded metal Leveller and Straightening machine can be precisely adjusted on both sides. All of our crushing-ironing machines are made of special solid steel material and special heat treatments are applied. Irons the thickness of the expanded metal to the raw material thickness of the sheet. Materials that our Expanded Metal Crushing Machines can process; DKP, HRP, Aluminum, Stainless etc.