Complete sawmill (stationary)

Pilous Blockbandsäge CTR710M

Condition: used, Year of construction: 2007, functionality: fully functional, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 level compensators with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • Left: PLC - Right: joystick • 1 Zenz automatic sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water cooling with 20 l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders Laodpewlfdxefx Ancog • Log lifter preparation in frame o With control unit o Mount for pipe o Two mounts for cylinders • Hydraulic frame ejector for 820 mm • Green horizontal laser indicator Mechanisation consisting of: • Hydraulic folding frame for offloading at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors operate simultaneously • Roller table 4 m long – slightly inclined with stop o All electric and hydraulic elements operable from the operator’s station The block bandsaw including conveyor technology is fully operational.

Condition: new, empty load weight: 800 kg, maximum load weight: 2,700 kg, overall weight: 3,500 kg, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 350 mm, tire size: 195/50r13c, Three-way tipper PW3.6, 3.5 tons, from the manufacturer *Cheval Liberte or Debon*. This *trailer* can be loaded easily on three sides because it is a *three-way tipper* with folding and removable *side panels*. The front flap allows *long materials* to be loaded through. The load is unloaded from this *tipping trailer* using *electro-hydraulic* technology. The *car trailer* is equipped with *side panels* made of *aluminum* on all sides, which can be folded down and removed, *steel on a wooden floor*, *electric hydraulics* with a battery, a *rail system*, an *automatic jockey wheel*, a *raised platform*, *tie-down points*, a *welded, hot-dip galvanized frame*, and a *V-shaped drawbar*. Lodpfxei Ah Tcs Ancjag As optional accessories for the tipper, we offer loading ramps and rear supports, for an additional charge. In addition, we offer a *grate extension*, a *side panel extension*, a *tarpaulin cover*, a *flat cover, net*, and a *battery charger*.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 14,000 kg, total length: 13,000 mm, year of last overhaul: 2026, saw band length: 9,045 mm, EXCELLENTLY MAINTAINED, FULLY REFURBISHED horizontal band saw WRAVOR WRC 1250 AC Lsdjzd Uifopfx Ancsag High-performance industrial saw with a 55 kW motor — for cutting logs with a diameter of 1250 mm Year of manufacture: 2018 Technical data: • Main motor: 55 kW • Control: fixed control panel with PLC Unitronics V-280 • Option for manual adjustment of cutting thickness • Track (length): 12.5 m • Log clamps: 5 x hydraulic • Hydraulic cylinders: 5 x • Angle supports (90°): 5 x • Standard log turner: 4 x • Mechanical support: 3 x • Pre-cutter: 1 x • Output conveyor belt for transporting sawn timber The images are for illustrative purposes only.

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Lasdpfx Anexlcufecjg Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: used, functionality: fully functional, 1. CNE 1965 €1,300 2. CNE 1970 €1,400 3. CNE 1970 €1,400 4. CNG 1970 €1,100 5. CNS 1957 €800 6. CNL 1970 €800 7. CNG 1972 €1,100 Laodpfjwb Smljx Ancog 8. CNE 1968 €1,400 9. CNS 1975 €1,600 10. CNE 1966 €1,300 11. CMS 1959 €800 12. CNS 1955 €800 13. CNE 1969 €1,400 14. CNE 1968 €1,400 15. CNH 1970 €2,400

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw Ledpfsh N Thwox Anceag -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Sideboard height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 51 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Integrated loading ramps 2800kg -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Anti-theft device Lasdsghpcaspfx Ancjg -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration certificate, 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm T-slots 12 mm Lajdpfxeupw Tws Ancog weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Lodpedf Ud Ssfx Anceag Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: like new (used), Year of construction: 2017, operating hours: 100 h, functionality: unexamined, power: 102 kW (138.68 HP), fuel type: diesel, number of cylinders: 4, overall weight: 555 kg, type of cooling: water, Brand: John Deere Model: JD4045PWL Year of manufacture: 2017 Serial number: CD4045U040324 Power (kW): 102 Engine model: Turbo Stage III Laedpfeytf Rmox Ancjg Fuel: Diesel Dimensions LxWxH (mm): 880 x 750 x 1070 Weight (kg) approx.: 555 Units in stock: 1 Manufactured in: France Comments: Engine for construction machinery, suitable for telescopic handler Manitou MLT840/1040