Piovan dryer

Piovan PTUN 300

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Capacities / Travel distances: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Transverse (Z): 1,500 mm Clamping area NC rotary table: Indexing plate: 2,400 x 1,900 mm Max. load capacity (with centrical load): 10,000 kg Positioning accuracy arc/sec ±2.5” Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Type A Main spindle drive: Motor / manufacturer main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled), automatic gear shifting Spindle speeds: 6,000 rpm: low range rpm 0–738 medium range rpm 739–1,842 high range rpm 1,843–6,000 Axis drive / axis feed: Axis motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Max. working feed: X, Y, and Z axis 15,000 mm/min Max. mean acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Axis drive systems: X-axis (longitudinal) preloaded ball screw Ø 63 x 40 Z-axis (vertical) preloaded ball screw Ø 63 x 20 Y-axis (transverse) preloaded ball screw Ø 50 x 20 Guideway systems: X-axis (longitudinal) 6 pcs Type: INA RUE 55 EL Z-axis (vertical) 4 pcs Type: INA RUE 65 EL Y-axis (transverse) 8 pcs Type: INE RUE 55 E-HL plus additional damping unit Clamping table / Table surface: T-slot size 10x: 22 H12 mm Reference slot, center 1x: 22 H8 mm Fedpsygiwqjfx Aarspd T-slot spacing: 150 mm (pitch of outer slots 1,800 mm) Weight: Weight RT3000 approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 stations Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with increased pressure to 37 bar ICS Special operating mode 4 RepairFIT is our proven package for a profitable entry into our product lines. Machines available in this line are sourced through a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any found defects and faults are professionally repaired by our expert service team.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, total length: 12,200 mm, total height: 2,890 mm, total width: 2,440 mm, power: 1.65 kW (2.24 HP), fuel: diesel, Equipment: type plate available, These are three emergency generators, each with a 2000 kVA capacity and 1600 kW continuous output at a cos phi of 0.8. Voltage: 10 kV, frequency: 50 Hz. A viewing is possible in 49733 Haren. Engine manufacturer: Perkins Generator manufacturer: Stamfort Design: 40" soundproof container with a sound level of 85 dB(A). Dimensions: 12,200 x 2,438 x 2,890 mm (L x W x H) Weight: approx. 35,000 kg The data sheet (German and English) is attached. Fpsdpeqqhuysfx Aarjd The container also contains a 2,000 L tank for the initial diesel supply. The generators are regularly tested under load.

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. Fjdpfebqt Arex Aarspd For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request.

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: Fodpfevby U Sjx Aarspd ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Fpjdpew Az Risfx Aarjd

Year of construction: 2001, condition: used, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 500 mm table clamping surface:: 400 x 300 mm table load: 50 kg semi-automatic operated: LASERSOFT 3D laser capacity: 100 W total power requirement: 27 kVA weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 3,5 x 2,8 m CNC engraving/texturing/labeling/contouring-laser maschine, approx. 9.000h "machine on", approx. 5.500h "laser on" Fedpfx Aasikbtnorepd *

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. Fpsdpjyc Sfpefx Aarsd tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty

Condition: good (used), Year of construction: 2014, Table size 3500 x 820 mm, Traverses XYZ 3000 x 820 x 720 mm, Table load 2500 kgs, Fodpjw Nwt Eofx Aarepd Spindle taper Din 40, Spindle speed 12000 rpm, spindle power 22Kw, 30 ATC, Mazatrol Matrix Nexus control, through spindle coolant, swarf conveyor

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-live machine) Technical data: Adjustment travel: 450x300x300mm workpiece clamping table 820x400mm tank size 900x520mm filling height 300mm distance table/electrode holder 150/450mm workpiece weight max. 800Kg Dielectric max. 700l dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz power consumption 6,7 KVA Equipment: Color: new painting light grey + telegrey New control cabinet New control APC910/2 (win10) User interface MF30 V 2.8 New drives B&R with Endat interface Screen touch screen Generator exopuls+ 60A Rev.4 WZW 5-fold Touch protection operable via push button Linear scales in all axes X, Y, Z (Fagor) cartridge filter 2 pieces Cooling unit Termogamma Complete new machine installation New ball screw, bearing, coupling Maintenance unit with digital pressure switch Valve island Co² extinguishing system C-axis Hirschmann 50/min., holding brake Refurbished Manual control bar with enabling button Lowering tank automatic tracking Fsdpehtrdyefx Aarepd chuck Erowa IST, Hirschmann, 3R Warranty 12 months Transport commissioning on site training

Year of construction: 2022, condition: new, For sale is a NS 2 conveyor belt from Mass International. You can buy the belt both with and without separating roller. Separator roller costs an additional € 332 Fpodpfx Aajf E E Iqjrsd Feed : 600 mm ascending belt : 1300 mm GB: 405 mm NB: 350 mm Belt speed constant: 3m /min