Flexible CNC drilling & inserting Line

PRIESS HORSTMANN BAT-RTW-CNC

Condition: excellent (used), CNC Flexible LINE for Drilling, Routing and Dowels Inserting With BECKHOFF numerical control (Windows-based software) Panel length: Min 260 mm / Max 2500 mm Panel width: Min 96 mm(*) / Max 1200 mm Panel thickness: Min 13 mm / Max 25 mm (*) Panel width: min. 120 mm on the 3rd BAT for dowels inserting A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 2 drilling heads with 21 spindles each (2 x 2.2 kW) - 1 groove-cutting saw (2.2 kW) - 2 groove-cutting saws for the rear panel (2 x 0.37 kW) - 2 drilling heads with 12 spindles each (2 x 2.2 kW) - 1 horizontal groove milling unit (4.4 kW) Fodpfoy N Ucfex Acmspl C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 4 drilling heads with 9 spindles each (4 x 1.6 kW) - 2 drilling heads with 3 horizontal spindles each (2 x 1.6 kW) - 1 milling unit (4.4 kW) - 2 drilling heads with 5 spindles each (2 x 1.6 kW) D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system - 1 Horizontal glue application unit (pump and air-operated glue dispenser with 13 nozzles) - 1 Dowel insertion unit - 1 milling unit with 8-position changer (5 clamps) (4.4 kW) - 1 drilling head with 12 individually adjustable double spindles (1.6 kW)

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Fpodpfxjylp Slo Acmol Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Fjdpfetk It Sex Acmjpl Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Fpodpfei Hn Srjx Acmol Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3820, operating hours: 13,696 h, Workpiece length X: 200-3050 mm including roller conveyor Workpiece width Y: 50-1250 mm Workpiece thickness Z: 8 - 80 mm Vector speed: X/Y = 50 m/min; Z = 15 m/min Equipment: VERTICAL BORING UNIT V 15 HIGH SPEED including quick-change system and spindle clamping HORIZONTAL BORING UNIT WITH 6 SPINDLES IN X DIRECTION HORIZONTAL BORING UNIT WITH 4 SPINDLES IN Y DIRECTION NUT SAW IN X/Y DIRECTION 90° PLAUSIBILITY CHECK (X/Y) TOOL CHANGING SPINDLE 9 KW including converter Fodpfx Aezlbwfocmopl 4-POSITION PICK-UP CHANGER, side-mounted POSITIONING CYLINDER for workpiece positioning WORKPIECE CLAMPING SYSTEM WORKPIECE HANDLING MACHINE CONTROL: POWERCONTROL with Powertouch MACHINE OPERATION: POWERCONTROL SOFTWARE: WOODWOP; TOOL DATABASE; MACHINE DATA ACQUISITION; PRODUCTION LIST SOFTWARE; OFFICE PACKAGE; WOODWOP DXF IMPORT BASIC; WOODASSEMBLER; 3D SIMULATION Operating voltage: 400 VOLT; Frequency: 50 HZ Energy-saving function

Condition: used, machine/vehicle number: 005910, X axis working area: 2500 mm Y axis working area: 1300 mm Main Electrospindle power: 6 KW Fpedpswuckhefx Acmel Number of controlled axes: 3 axes Total number of drilling spindles: 84

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, Fsdpezkmqzjfx Acmjpl milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) Fsdpfokt Uuaex Acmjpl M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"

Condition: good (used), Year of construction: 2007, working width: 800 mm, Polishing machine Manufacturer: Gottschild Model: HBS Fjdpfx Acexzqrqjmspl Year of manufacture: 2007 High-gloss polishing machine, previously used for polishing kitchen fronts and bathroom furniture parts Working width: 800 mm 1 polishing head, moves automatically right – left Polishing motor: 0.7 / 0.9 kW Working area is detected by sensors Conveyor belt width 820 x length 1950 mm Conveyor belt moves forward and backward One roller conveyor each in front of and behind the transport system, B 820 mm x L 1500 mm Connected load 2.2 kW / 400 V / 50 Hz Compressed air connection 6 bar

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Fodpfxoyyvtte Acmepl Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)