Vertical machining center

Quaser MV184E

Condition: good (used), Year of construction: 2010, Heidenhain 530 Control, Traverses X Y Z: 1050 X 510 X 510mm, Table 1300 X 550mm, Distance From Spindle Nose To Table 150 ~ 660mm, Maximum Workpiece Weight 1200kg, Spindle Speed 0 – 12000rpm, Spindle Taper DIN40, Gsdsucdvqopfx Ah Ejbw Spindle Motor 11kW, 30 Station ATC, Swarf Conveyor, Coolant, Low Volt Light ,

Condition: used, Year of construction: 2007, A 2007 Built Hardinge Bridgeport XR760 with Fanuc 18iM control, 12,000 RPM RPM spindle with through coolant, 30 tool rapid ATC & swarf conveyor X Axis 760mm, Y Axis 610 mm, Z Axis 610 mm Working Surface 1000 x 600mm, Table Load 900 kg, Number of T-Slots 5, T-Slot Size 18 mm, T-Slot Center Dimension 100 mm Table Surface to Spindle Gauge Plane Distance 100 to 710 mm Feedrate Range (X and Y Axis) .0025 - 20 m/mm Feedrate Range (Z Axis) .0025 - 20 m/mm Ball Screw Dia. and Pitch (X and Y Axis) 45 x 16 mm, Z Axis 45 x 12 mm, Spindle 12,000 RPM Fanuc Motor HP Rating (S6 40%) 25Kw, Torque (S6 40%) 159.2Nm, Spindle Taper BT 40 Magazine Capacity 30 Tools Max. Tool Diameter 125 mm (adjecent pocket) 80 mm Max. Tool Length 300mm, Max. Tool Weight 7 kg, Coolant and Chip Management Swarf Removal Chip Conveyor, Coolant Tank Capacity 355L, Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard, Through Spindle Coolant Accuracy - ISO 230-2. Positioning - A 0.010 mm, Repeatability - R 0.004 mm, Machine Size, Machine Dimensions (WxD) 2528 x 3000 mm. Electrical Supply (Input)—Balanced 3-Phase 50 or 60 Hz, Power 25 KVA, Voltage, Compressed Air (Pressure / Flow) 4.9 cfm, Coolant Flow Rate at Cutter 160 L/min. Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min Control: Fanuc 18iM Godpfovkwk Ajx Ah Ejbw Specification: Travel X 760 Y 610 Z 610 mm | 12000 RPM | BT40 Accessories: 30 tool rapid ATC & swarf conveyor Name of machine: Hardinge Bridgeport XR 760 Rapids: Auto Mode (X and Y Axis) 43 m/mm. Auto Mode (Z Axis) 36 m/mm

Condition: used, Year of construction: 2004, MAZAK QUICK TURN NEXUS 200-M CNC LATHE Mazak Quick Turn Nexus 200 M CNC lathe with Mazatrol Nexus 640T control, a new 8” power chuck with big bore to take 80mm, tool setter, parts catcher, swarf conveyor, suit of tool holders, collet chuck and barfeed interface * Note: Photographed on arrival…awaits cleaning & prep. Specification: Maximum Swing 675 mm / 26.57 in Godpfxowx Nl Hj Ah Ejbw Maximum Machining Diameter 380 mm / 14.960 in Maximum Bar Work Capacity 65 mm / 2.6 in Maximum Machining Length 541 mm / 21.300 in Main Spindle Chuck Size 8 in -with big bore Maximum Speed 5000 rpm Motor Output (30-minute rating) 19 kw / 25.0 hp Turret (Upper) Number of Tools 12 Maximum Speed 4500 rpm Motor Output (5-minute rating) 6 kw / 7.5 hp Feed Axes Travel (X Axis) 230 mm / 9.06 in Travel (Z Axis) 575 mm / 22.64 in

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC: HEIDENHAIN 530 Drilling diam.: diam. 32 mm Drilling length: 1000 mm X-axis travel: 2000 mm (table) Gbsdpfovznyisx Ah Ejw Y-axis travel: 800 mm (vertical) Z-axis travel: 2000 mm (T-column) Table dimensions: 1500x1000 mm Table capacity: 7/10 ton Indexing angle: 360° Milling spindle: SK40 M30, 200 cm^3/min Motor power: 11 kW Rotation speed: 6000 rpm 24-place tool changer Overall dimensions: 5600x5000x3320(h) mm Pump 100 bar

Condition: good (used), Year of construction: 2009, Ref. -No.: 10521 Manufacturer: LAGUN Type: CM 6 Year of construction: 2009 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 6000 mm Y-Travel: 1200 mm Z-Travel: 2000 mm C-Axis: 0,001 ° Rapid Traverse X/Y/Z: 30 m / min Table surface area (LxW): 7500 x 1100 mm Tool changer: 60 Drive power spindle: 60 kW Table load max.: 5.000 kg Tool Taper: SK 50 Spindle Speeds: 6.000 RPM Gjdpfsxc Tttjx Ah Esbw Further information: Automatic universal swivel head 1° x 1° incl. accessories, tools, holders 4th axis preparation (rotary table) Positioning accuracy: ± 0.030 mm Repeat accuracy: ± 0.010 mm Machine is in production and can be inspected under power at any time.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L Gsdpfsw Dcdysx Ah Esbw POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: used, Year of construction: 2012, Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: - X Axis: 1,020 mm - Y Axis: 600 mm - Z Axis: 600 mm - Spindle Nose to Table (~ max): 700 mm - Spindle Nose to Table (~ min): 100 mm​ TABLE: - Length: 1,120 mm - Width: 650 mm - T-Slot Width: 18 mm - Number of Std T-Slots: 6 Gsdswfdzcspfx Ah Esbw - Max Weight on Table (evenly distributed): 1,000 kg​Machinery Resources International SPINDLE: - Max Rating: 15 kW (20 hp) - Max Speed: 12,000 rpm - Drive System: Direct Speed Belt Drive - Taper: Big Plus BBT40 - Bearing Lubrication: Oil Injection - Spindle Chiller FEEDRATES: - Rapid and Jog (Max.): 24 m/min AXIS MOTORS: - Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW​ TOOL CHANGER: - Type: Side mount - Capacity: 30T - Max Tool Diameter: 76 mm - Tool Length Max.: 300 mm - Tool Weight Max.: 6 kg - Tool Change Time: 2.5 sec​ GENERAL: - Air Required: 78.2 psi/min - Power Supply: 400 V / 3 Phase - Coolant Capacity: 360 L - Machine weight 7,000kg Control: Heidenhain TNC i530 Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40 Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 Gjdjw Dud Sspfx Ah Ejbw *

Condition: used, Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, controller manufacturer: Heidenhain iTCN 530, workpiece weight (max.): 1,000 kg, table width: 620 mm, table length: 1,350 mm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, tool length: 220 mm, tool diameter: 150 mm, tool weight: 7 g, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 Gbjdpfx Ajxlrnbeh Esw C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: good (used), Year of construction: 2009, XYZ: 1020 x 540 x 540mm, Table 1120 x 540mm, 15kW, Heidenhain tnc 530 , 10,000 rpm, Gjdoxfvnropfx Ah Esbw 24 station ATC, BT40 taper, low volt light, swarf conveyor, coolant.