5-axis milling machine

RödersTec RXP500DSC

Condition: used, Year of construction: 2012, x-travel 185 mm z-travel 385 mm control Mazatrol Matrix Nexus Maximum swing diameter 550 mm Maximum turning diameter 280 mm bar capacity 51 mm workpiece weight max. 200 kg main spindle speed 35-6000 U/min milling head speed 25-4500 U/min tool turret 12 Plätze rapid power traverse in X-and Z direction 30/33 m/min spindle bore 61 mm weight of the machine ca. 3800 kg Capacity: Bjdpfxjyukgco Ab Ujlf Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 84–469 mm Main spindle: Speed: 35–6000 rpm Spindle bore: 61 mm Spindle nose: A2-5 Tailstock: Tailstock body travel: 350 mm Max. thrust: 1962 N Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M16 x 2.0 mm End mills: 16 mm Milling spindle speed: 25–4500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Documentation

Condition: excellent (used), Year of construction: 2007, Okuma MB-46VAE Machining Center Bljdpfx Abjxwtp Ds Uef Year of manufacture: 2007 Control: OKUMA OSP P200-M Table size: 1000 x 460 mm X travel: 762 mm Y travel: 460 mm Z travel: 460 mm Table load capacity: 700 kg Spindle cooler Taper: MAS BT40 Magazine with 42 tool stations Weight: 6500 kg Dimensions LxWxH = 2750 x 2160 x 2715 mm

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table Bjdpeh Sptnjfx Ab Uelf - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 960 mm, turning length: 10,000 mm, turning diameter: 1,300 mm, spindle bore: 160 mm, Lathe Wohlenberg model M 1000 BSN in excelent condition. Machine were retrofited with Siemens 802. Blsdpexprrbefx Ab Uef Machine is under power and it can be tested.Two steady rest

Year of construction: 2020, condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Bjdpfeiryf Ssx Ab Ujlf Motor power coolant pump: 0.125 kW table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Bljdev Igghspfx Ab Uef Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS Blsdpfxelkbpzs Ab Uef compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Blsdpfshigmbex Ab Uof Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Blodpjym Nfhefx Ab Ujf Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Bsdpfxjxva Ahs Ab Uslf Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.