Three-jaw chuck

RÖHM

Condition: repair required (used), Hydraulic vise, machine vise, NC compact clamp -Handover in its current condition as inspected The vise has no spindle and is therefore sold as a source of spare parts. -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm Iiedpfx Aeb A Ik Dobvjc -Weight: 104 kg

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Iijdpfx Abevzmtzsvjc Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: good (used), Year of construction: 2007, chuck outer diameter: 600 mm, through hole: 120 mm, Metal cutting Tooling ROHM - SDT MACH-ID 2965 Make: ROHM Type: SDT Year: 2007 Iiodpjzdiwysfx Abvoc Diameter: 600mm 4 chuck: x Spindle bore:120mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, chuck outer diameter: 400 mm, through hole: 100 mm, Metal cutting Tooling ROHM - 400 Iedszdilpopfx Abveic MACH-ID 2994 Make: ROHM Type: 400 Year: 2007 Diameter: 400mm 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Iiedpfxjwya A So Abvec Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1999, chuck outer diameter: 250 mm, through hole: 75 mm, Metal cutting Tooling ROHM - 250 MACH-ID 2997 Make: ROHM Type: 250 Year: 1999 Diameter: 250mm Ijdpfx Ajzdih Djbvoic 4 chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm 3 Chuck: x Spindle bore:75mm Iiodpfezdidtsx Abvec Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1973, turning diameter over bed 490 mm turning diameter over slide rest 280 mm turning length 2000 mm Iedpfx Astqqvvjbvsic centre height 245 mm centre distance 2000 mm spindle bore 62 mm total power requirement 7,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant

Condition: used, RÖHM 3-Jaw Chuck, Used Type DURO-T315 Ijdpfx Aswm D Rtsbvsic - without jaws -

Condition: new, Röhm PKF-150/3 ZA124 KA No.: 33902 3-jaw precision chuck 150-0.75 stroke Id.-No.: 429818 P0103 Operating pressure 2-10 bar, max. 5000 rpm. Serial no.: 586-009150-00, unused in opened original packaging, 100% functional, scope of delivery as per photos. Iodpfsx Eub Hjx Abvjic

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Make Forkardt F 250 Thread adapter 105 x 6 mm Cylinder diameter 105 mm outer diameter 250 mm Iiedjfb T Dbspfx Abvsc Inner diameter 63 mm Chuck height with flange 180 mm Age was estimated

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:B7952 ,unused in opened original box, 100% working, scope of supply according to photos Ijdpfxei Ec Duj Abvjic

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:Z6653 ,unused in opened original box, 100% working, scope of supply according to photos Iedpfx Aboi Ec D Asvjic

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 Iedpou Ix Hdofx Abvjic tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: new, Röhm KFB ND25 VKS core mandrel 396268A ,unused, 100% functional, scope of delivery according to photos Iedpji Ec Dqjfx Abvsic