Circular saw

Rapid

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm Dsdpfx Aey Sy Nisckech MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feed Arrangement of the units: On a rotating table, enabling machining at various angles.

Condition: new, Technical data: Dodpfx Aegtm U Aockoch Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Max working height: 160 mm Calibrating steel roller with a diameter of 150 mm Rubber roller with a diameter of 150 mm Sanding pad width: 50 mm Common motor power of 2 grinding aggregates: 11 Kw Speed of sanding belts: 16/18 m / s. Feed motor power: 0.55 kW Infinitely adjustable feeding belt: 4-20 m / min Worktable motor power: 0.25 Kw Pneumatic shoe for jump / jump: YES

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, The new price of the machine was €950,000! TECHNICAL DETAILS Milling heads / Motor output Speed: 2,800 rpm Motor output, small milling head: 0.27 kW Frequency, small milling head: 300 Hz Speed, small milling head: 18,000 rpm Motor output, large milling head: 1.1 kW Frequency, large milling head: 200 Hz Speed, large milling head: 12,000 rpm Tool data / Milling head data Collet diameter, small milling head: max. 8 mm Milling head diameter, small milling head: max. 8 mm Collet diameter, large milling head: max. 10 mm Milling head diameter, large milling head: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile guides Tools: Two screwdrivers, three cut-off wheels Djdpfx Ajy Syuxjckech

Condition: excellent (used), CATALOG NO. 6631 TECHNICAL DATA - Loading hopper opening: 285x305mm - Motor: 7.35 kW - Number of knives: 3 pcs + 2 counter knives - Knife size: 300x75mm - Screen (2 types): 10mm, 8mm - Extraction nozzle diameter: 100mm - Dimensions (L/W/H): 1070x900x1980mm - Weight: 613kg ADVANTAGES – Swedish production – Additional screen included – Very good condition – Used chipper Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, price may change) Dcodpjza D Uqjfx Ackjh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 29 kg Dcjdpfxev A Hhhj Ackjh Total power requirement 0,25 kw

Year of construction: 1992, condition: good (used), functionality: fully functional, Manufacturer: Rapid Djdpoyyp Uqefx Ackjch Type: 1415 Grinding chamber dimensions: 150 x 140 mm Power: 1.5 kW New knives

Year of construction: 1996, condition: good (used), functionality: fully functional, Manufacturer Rapid Dcodpfx Acevndpajkjh Type 1521-L Year of manufacture 1996

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx. Dsdora N A Nspfx Ackoch

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual Dcjdpsu Nigwjfx Ackeh flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: ready for operation (used), Column chain cutter with various cutter sets Dodpfx Asu Imzvockoch

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm Dcedpfx Aoh Nvyzockjh -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, Year of construction: 1997, functionality: fully functional, total length: 11,000 mm, RAPID Maschinenbau TYPE: RSE, SERIES 1005, YEAR 1997 Operational. Used for cutting timber frame components and simple roof truss elements. -Horizontal swivel range from 15° left to 15° right, indicated on the display. -Vertical swivel range from 40° left to 90° right, indicated on the display. -Right-hand length stop, indicated on the display. -Documentation in German + instructions on how to calibrate and reset. -Two-hand operation. -2 vertical clamping cylinders + 2 horizontal clamping cylinders. -Left roller conveyor, approx. length 4000 mm. -Right roller conveyor, approx. length 6500 mm. -Operating air pressure min. 6.5 bar. Djdpfjy Exxvsx Ackoch youtube.com/shorts/pj_alOG0Xpo?si=MLVmkJXTL_xWzoif Please feel free to ask questions/inquire about the price.

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 Dcedpfx Acsyxy S Dekeh In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Condition: new, functionality: fully functional, input voltage: 400 V, planing width: 310 mm, number of blades: 30, rotational speed (max.): 4,000 rpm, total length of planing tables: 1,300 mm, overall weight: 180 kg, Equipment: CE marking, Application of a helical cutterhead with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional straight knife cutterhead. The advantage of carbide inserts is that, in case of damage, individual knives can be replaced or rotated, which significantly reduces operating costs. The carbide-tipped blades provide tear-free planing and optimal smoothness with every type of wood. Quick and hassle-free folding tables allow fast conversion to thicknessing mode. Integrated, tiltable chip extraction device - connection diameter 100 mm. Both tables are equipped with precision adjustment systems and noise-reducing covers. The planer table is centrally mounted on the guide column with a support bracket. Stable fence with prismatic guide, tiltable from 90° to 45°. Tables are made of cast iron with polished work surfaces. Cutterhead guard included. Technical Specification Voltage: 400 V Dcedjyt I H Dopfx Ackeh Dimensions (W x D x H): 1300 x 900 x 1180 mm Weight approx.: 180 kg Planer Planing width: 310 mm Cutterhead speed: 4000 rpm Working height: 990 mm Number of knives/inserts: 30 pieces Cutterhead diameter: 75 mm Planing fence: 1110 x 130 mm Fence tilting range: 90° - 45° Max. chip removal in planer: 5 mm Planer table length: 1300 mm Thicknesser Thicknesser table length: 600 mm Thicknesser planing width: 305 mm Minimum workpiece height: 5 mm Maximum workpiece height: 180 mm Max. chip removal in thicknesser: 2.5 mm Feed speed: 8 m/min Dust extraction port diameter: 100 mm Motor power: 3 kW Motor power S1 100%: 2.2 kW

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Dodoxmt Eqepfx Ackech