Combined planing-thicknessing machine

ROBLAND SD-510

Condition: excellent (used), Robland SD-B 510 thickness planer, planer and drilling machine - Electric lift Klsdsx Ha Eaopfx Agqjl - Planing height: 25 cm - Planing table length: 2250 mm - 4 standard knives - 4 feed speeds, controllable by switch - Sound dampening comb - Thickness planing table without rollers, on 4 supports - Horizontal boring machine with eccentric clamping device - Weight: 1300 kg The machine is in very good condition, looks like new, not repainted.

Condition: new, machine/vehicle number: NEW-1, empty load weight: 585 kg, maximum load weight: 2,115 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, Year of construction: 2024, HOLIDAY PROMOTION: Up to 15% discount on accessories such as leaf grates, electric tipping controls, and integrated rails. New Series Rear Tipper! Tandem axle, braked rear tipper high loader with aluminium drop sides, foldable and removable on all sides, wooden floor with steel sheet cover, welded, hot-dip galvanized steel frame, automatic jockey wheel, six lashing rings on the sides in a V-groove, 13-pin electrical system with reversing lights, hydraulic hand pump, low chassis. Plus shipping to Gera and vehicle registration certificate: €200 Optional accessories available at extra cost: electric operation, leaf grates, tarpaulin and frame, 100 km/h equipment, etc. Ksdpeghpdijfx Agqell Delivery available at extra charge! Financing/leasing available Images are for illustration purposes only!!

Condition: new, Year of construction: 2025, Working width: 510 mm Planer shaft: Tersa Number of knives: 4 Surface table length: 2250 mm Surface fence, angle adjustable: yes, 45° to 90° Maximum planing height: 250 mm Height adjustment of thicknessing table: electric Thickness display: mechanical counter Feed speed: 8 / 16 m/min Infeed roller: steel Outfeed roller: steel Pressure bar: segmented pressure beam Motor power: 7 kW Kodpsxrbhkefx Agqell Motor brake: yes, automatic Extraction port: 150 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 900 kg

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Dimensions cross-cut table 1420 mm x 650 mm Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Scoring unit Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6) Ksdpfx Aoglfv Sjgqjll

Condition: new, Bernardo Universal Turning Machine Master 360 Pro Peak 1000 mm Peak height 180 mm Orbital diameter via bed 360 mm Orbital diameter via creation * 502 mm Orbital diameter via paddling sled 220 mm Bed width 185 mm Spindle hole 52 mm Spindle intake A4 55029, D1-5 Speed range (8) 70-2000 U/min Area Longitudinal Pros (32) 0.052-1,392 mm/U Area of planning precurs (32) 0.014-0.380 mm/U Metric threads (26) 0.4-7.0 mm Customs thread (34) 4-56 Gg/1 " Pinol diameter 42 mm Pinoline path 100 mm Klsdpfx Ajd I H Izegqol Pinol intake MK 3 Engine drop-off power S1 100% 1.5 kW (400 V) Engine recording power S6 40% 2.2 kW (400 V) Machine Measurement (B x T x H) 1825 x 750 x 1600 mm Weight about 576 kg * Bed length removable: 205 mm Delivery • 3-axis digital display i200 with LCD display • 3-baking lining DK11-200 mm/D5 • Planboard 200 mm/D5, according to A4 55029 • Fixed bezel-passage diam. max 70 mm • Running bezel-passage diam. max 60 mm • Coolant equipment • First filling with Shell Tellus 46 • Extractable late newfir • Tension 280 mm • Quadruple steel holders • Protection device for quadruple steel holders • Slip clutch • Micrometer longest strike • Thread watch • LED machine light • Reducer sleeve • Changes • 2 centering tips • Foot pedal with braking function according to CE • Engine with magnetic brake according to CE standard • Unterdesigned with drawers • Operating tool

Condition: new, Year of construction: 2025, Machine features This planer and thicknesser is a well-designed machine, providing large adjustment and mechanical machining possibilities of hard and soft wood. Adjustment itself is relatively simple and transforming the planer into a thicknesser takes only a couple of seconds. Relatively high weight (148 kg) ensures stability, and work safety, reducing vibrations with additional anti-vibration feet. Advantages of the planer Both tables of the planer are made of high-quality cast iron, with ground and Ra 1.6 polished surface Shaft guard can be freely set, adjusting its height, angle as well as extension Angular guide can be smoothly adjusted in the 90° – 45° range Planer tables involve additional sound dampeners decreasing noise Advantages of the thicknesser Thicknesser table is made of high-quality cast iron, with ground and polished surface Height is adjusted through a large and convenient handwheel, which, after adjustment, can be locked with an additional eccentric Its table is supported in 3 places Thicknessing can be lowered down to 190 mm Machine equipped with rollers (driving and receiving) which are located very close to the shaft, allowing for machining even short elements Roller feed drive is based on a belt, ensuring slip-free work (no "tooth marks" on the workpiece) Technical data Knife shaft diameter 75 mm Knife shaft speed 4800 rpm Extracting connector diameter 100 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum surface planer width 250 mm Maximum thickness planer width 248 mm Maximum surface planing height 180 mm Maximum thickness planer machining depth 3 mm Maximum surface planer machining depth 2.5 mm Thickness planer feed speed 6 m/min Dimensions (L×W) 1080×260 mm Kedpfxovxh Nxo Agqoll Weight 150 kg Motor power 2.0 kW Power supply 1 PHASE, 230V

Condition: used, Year of construction: 2022, Used Machine Year of Manufacture: 2022 Features and Technical Data: - Ideally suited for demanding craftsmen and joiners/cabinetmakers - Extra-long, one-piece surfacing tables ensure easy and precise jointing of workpieces - Working tables are made from cast iron, making them highly durable and permanently flat; simultaneously opening surfacing tables with spring-loaded supports enable quick and convenient changeover - Fixed-mounted extraction hood means no need to disconnect the extraction hose during changeovers, saving valuable working time - Helically-geared steel infeed roller for consistent and even timber feed Kjdpfx Agsx Hbrnsqoll - Rubber outfeed roller at the thicknesser exit ensures uniform wood discharge - Four feed speeds for material transport - Thicknessing table adjustment by handwheel with integrated height display - DIGITAL version: with electric thicknessing table height adjustment and digital readout - Start/Stop switch located at operator position - Powerful industrial motor - High machine weight guarantees maximum precision and smooth operation - Prepped for long-hole drilling attachment - Quality Made in Italy - Equipped with spiral cutterhead - Fitted with foldable cutterhead guard - Total table length: 2,250 mm - Maximum cutting depth: 5 mm - Working width: 520 mm - Thicknessing height range: 3 – 240 mm - Number of knives: 66 pcs - Cutterhead speed: 5,000 rpm - Motor: 9 kW - Feed speed: 5/8/12/18 m/min - Extraction port: 120 mm Weight: 695 kg Dimensions: 2,250 x 1,440 mm Availability: approx. end of January 2026 Location: North Rhine-Westphalia

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Equipment and technical specifications: - Cutting length: 2800 mm - Cutting width: 1250 mm - Saw blade swivel range: 0° - 45° - Max. saw blade diameter: 350 mm Klodpfoxuxg Nsx Agqel - Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm - with scoring saw unit - with parallelogram guard - with extraction port 80 mm - with table extension 800 mm - Motor 5.5 kW - with brake motor Weight approx. 850 kg Availability: approx. end of January 2026 Location: Hesse

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm Klsdpfx Aehfufgsgqel -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618 Kedswp Ri Uspfx Agqsll